thermal insulation materials Germany

...High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

...The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance...

...as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable Material:Recycled polyethylene (PE) Nominal thickness:approx. 1,2 mm Grammage:approx. 1,200 g/m² Colour:black / grey...

...Insulation Hangers: Self-adhesive brackets for insulation material These insulation hangers, featuring an easy-to-remove adhesive on the back, securely attach any type of insulation up to 3.5 inches thick to air ducts, metal structures, concrete foundations, or the underside of wooden roofs.

...Custom-fit insulation for cold areas...

...Ceramic and bio-soluble fiber materials as well as accessories and their applications These products are designed for experienced users as thermal insulation, heat shields, thermal storage, seals, and expansion joints for temperatures up to 1600°C. Properties: - Excellent thermal insulation properties - Resistant to most chemicals except hydrofluoric acid, phosphoric acid, and strong alkalis - Low thermal storage - Good sound absorption - Lightweight...

... is nearly impossible with proper use. Application: The mechanical fastening of insulation materials on exterior walls in wooden construction / in thermal insulation composite systems (WDVS). Suitable substrates: - Wood (solid wood, laminated veneer lumber, particle boards, OSB, etc.) - Gypsum fiberboards...

...XPS Perimeter Insulation 300 kPa Basement Insulation Floor Insulation Thermal Insulation Extruded Polystyrene WLG 032-036 with Step Joint...

...Some technicians use the term thermal insulation board. Thermal insulation boards for heated presses in wood and plastic processing. Heat protection boards, pressure-resistant insulations for heated presses. Common insulating materials for thermal insulation boards: DuroBest® 200/230/250/280 approx. 1000 x 2800 mm K-Therm® AS 600M / AS 800M approx. 1000 x 1200 mm, special lengths available upon...

...Frenzelit insulation boards are designed for use in high-temperature applications in thermal engineering, plant and furnace construction, process industry, shipping, as well as in building fire protection. The combination of materials results in high temperature resistance. The insulation boards can be processed in various ways, such as drilling, milling, grinding, and water jet cutting.

... behavior even after tens of thousands of rolling cycles. GLASS REFLECT is available in two color variants: double-sided silver and one-sided gold with silver. This thin architectural fabric meets the fire class EN 13501-1 A2 – s1, d0 and provides a valuable appearance with very good thermal separation. If metallic surfaces are not desired, an optional white light-acoustic sail can be supplied...

The company Flexopak was newly founded on March 2, 2000, from a competent industrial sewing shop in Altena. We manufacture flexible insulation for thermal, cold, and sound protection, as well as filter hoses. Our goal is to supply customers flexibly and quickly. Special requests are always welcome. Each part is tailored specifically to the needs and technical requirements of the customer. Our empl...

ACERTEC® GmbH and MKM Engineering GmbH are available to their customers as service-oriented, competent, flexible, and high-performance partners. Customer-specific system solutions that go far beyond general component manufacturing are the strength of our engineering and technician team. The flexibility and readiness of the ACERTEC / MKM group guarantees our customers high delivery reliability, as...

...Stokvis Tapes can manufacture self-adhesive products from your own materials or laminate adhesive tapes together. Whether it's one layer or five, we transform your ideas into unique and easy-to-handle materials.

...ENVIMAC has been supplying column internals for separation columns in the chemical, petrochemical, exhaust air and flue gas treatment, as well as wastewater treatment for over 25 years. In addition to the separation-effective column internals such as packing materials, packings, and trays, non-separation-effective internals like liquid distributors, support grids, profile grids, and liquid collectors also have a significant impact on the operation of a column. Suitable droplet separators ensure effective removal of entrained droplets at the top of the column.

...Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust...

...GEOCELL® foam glass aggregate is a high quality product made from post-consumer recycled glass. It meets the highest quality requirements and provides outstanding features, which has no other product in this variety. GEOCELL® is 100 % mineral and combines low density with a high compressive strength. In addition to its very good thermal and sound insulating properties, it is also resistant to moisture, fire, chemicals and aging - a true "all-rounder". This combination of positive properties is providing many advantages and making GEOCELL® suitable for different industries.

...Thermal and cold insulation for ventilation ducts. CE certified - Fire protection B-S2 d0 Closed-cell flexible PE foam - Aluminum laminated and self-adhesive! Product range: 3 - 24 mm Thermal-cold insulation for ventilation ducts and plant construction! Flexible cross-linked PE foam - Self-adhesive and aluminum laminated! - CE certified according to EN 14313 - Fire protection B S2 d0 / C S2 d0...

... pressed over the thread and locks into place. In cases of higher temperatures or significant mechanical stress, a thicker threaded plate can be used as a closure. In addition to metallic end plates, ceramic fastening elements, known as Cuplocks, are also available. These have the advantage that the thermal load is not fully transferred to the threaded pin, as it does not protrude into the furnace interior. Thus, the anchoring of the Cuplock occurs within the thermal insulation.

... urban areas with high-rise buildings, thermally separated facades are especially crucial for ensuring efficiency and safety. With our extensive experience in working with windows and doors, we can optimize element facades (external areas that combine various components and materials into a single element) so that you can have complete peace of mind. For curtain wall facades, we also offer polyamide spacers and pressure plates to ensure thermal insulation performance. Insulation profiles made of PA66 GF25 provide an ideal alternative to.

...Corner and plugin profiles and seat support covers TC products aren’t always apparent at first glance. They often resolve problems in complex assemblies. For instance, they are used to meet the need for a component that has good thermal insulation properties, but is also lightweight and has a high mechanical load capacity. Providing solutions with composite materials Lightweight yet high rigidity and strength Good thermal insulation Freedom in design for customised shapes Highquality, paintable surfaces Undercuts can be created in the profile Universal for radio waves...

...We use all common types of insulating materials to achieve optimal insulation performance. The metal cladding is pre-fabricated in our in-house workshop. This allows us to respond individually to every customer request.

...With our innovative materials, we meet the growing demand for lightweight solutions to reduce CO2 emissions. The stamped parts from TROCELLEN impress with their low weight while providing excellent sound and thermal insulation properties, as well as a pleasant tactile feel. Thanks to these compelling characteristics, they are used, for example, for sealing, as seat reinforcement, or for wheel arch cladding.

...Grupor® Roller Shutter Box KOMBI-Renovation System, highly efficient sound and thermal insulation for existing roller shutter boxes. In contrast to the renovation mat mentioned above, the focus of the KOMBI renovation mat is on reducing disruptive external noise. A quiet and warm apartment is essential for a comfortable living environment. The development of the Grupor® combination insulation mats complies with EnEV2009 and reduces sound and heat leakage at the roller shutter box in older buildings. Cold and noise stay outside - warmth, tranquility, and comfort remain inside.

...Everything from a single source When you choose thermal insulation from NovaNox, you not only receive top-notch quality but also the highest level of service. Our team not only ensures a space-saving design for the insulation but also advises you on materials suitable for temperatures exceeding 1,300°C. As experts in the commercial vehicle sector, we can also assist you with the geometric...

...Environmentally friendly, expanded special granulate made from inorganic mica mineral. It is used as thermal insulation and soundproofing material, as well as an absorbent and packaging material for hazardous goods and flammable substances. Material: expanded special granulate from inorganic mica mineral Application temperature limit: up to 1000°C Sintering point: approx. 1100°C Grain sizes: 0-1 mm, 1-2 mm, 2-3 mm, 3-6 mm, 3-8 mm, 8-15 mm Bulk density: 60 - 200 kg/m³ Color: brown/beige Packaging: packed in paper bags, on pallets...

...Savings on energy and operating costs through well-insulated fans that have been professionally installed. Energy-efficient insulation for your fans Fans not only bring fresh air into your space. Additionally, you save on energy and operating costs through well-insulated fans that have been professionally installed. The fields of cold protection technology and thermal insulation are also...

...ARNOLD thermal insulation is a flexible intelligent insulation system that is very maintenance-friendly and pays off quickly. Save money in the long term with ARNOLD insulation systems.

... are therefore classified as A1. The melting point of this wool is at 1000°C. The spread of fire can be prevented by using these boards, allowing the product to serve as a fire barrier. The product can also be used in residential buildings as a diffusion-open thermal insulation composite system. The diffusion-open property allows for the absorption of moisture from the inside to the outside.

...Insulation with polystyrene, mineral wool, or perhaps hemp? External insulation or – for example, in the case of listed buildings – internal insulation? Insulation with polystyrene, mineral wool, or perhaps hemp? Particularly with thermal insulation composite systems – abbreviated as ETICS – questions often arise! We are happy to advise you and develop a concept tailored specifically to you and your property!