steel trough Germany

... enables targeted water distribution on the heat exchanger plates. The construction using a perforated tub has the further advantage that no contamination occurs and the liquid to be cooled is evenly distributed. Made of stainless steel The trickle cooler is made entirely of stainless steel. You can choose between different materials (see data sheet). Low boiling delay Our trickle coolers are characterized by the fact that the boiling delay is low in flooded operation, whereby overheating can be selected in dry expansion operation.

... leading names from industries such as: energy, chemicals, food, agricultural machinery, wind power, petrochemicals, mining, commercial vehicles, bus/rail technology, and environmental technology. Forged parts: up to 130 kg raw part weight Maximum length: 600 mm All steel grades: heat-treated steels, nickel-based, chrome-vanadium, molybdenum, alloyed, unalloyed, corrosion-resistant Special steel: titanium alloys, titanium-stabilized CrNi steels, molybdenum, vanadium...

... weight should not be exceeded. Design • Trough made of stainless steel 1.4301, electrochemically polished, open design, rectangular conveying cross-section, free discharge to the front. • The rigid and torsion-resistant design of the utility device is a prerequisite for flawless operation. Accessories • Standard storage container (also available in stainless steel) • Adjustable frame for layer height adjustment • Vibtronic-S control (conveying quantity adjustable from nearly 0 to 100%)...

... — Optional separate paddle drive to adjust paddle speed for difficult-flowing bulk materials Performance range - Various designs 50-11250 dm³/h Flexible screw trough: Polyurethane Housing, top container: Stainless steel (1.4301) Screws, tubes, outlets: 1.4571, 1.4301 or polyurethane, food-safe according to LMBG*...

...Features: Robust and custom-designed execution in high quality Available screw shapes: Full screws, band screws Available designs: tube design, pipe design Two and multi-shaft screw conveyors (also combing design) Use of wear-resistant materials Screw diameters up to 500 available Total lengths up to 12 m available Conveyors completely available in stainless steel! The conveyors can be tailored to your specifications!

... a relatively gentle rolling process. By maintaining small gap dimensions, even very small parts can be blasted. The filling and emptying of the machine can be carried out in different ways: In automatic mode with a feeder and discharge trough; in semi-automatic mode, filling can be done manually or via lifting equipment, while emptying can be done directly into customer containers. Filling volume (l): 50 - 550 Max. individual workpiece weight (kg): 10 - 25 Max. batch weight (kg): 100 - 1000...

...CX screw conveyors are made of stainless steel and are used wherever cleanliness and hygiene are of the utmost importance.

... such as forged blanks, pressed or stamped parts, and castings, we provide trough belt blast systems with rubber or steel link belts, as well as drum blast systems. Additionally, impact-sensitive parts can be blasted using the frame method. We manufacture using blasting media made of steel and stainless steel in shot and grit qualities with varying grain sizes and material hardness.

... services. Gap width (mm): 1.4 - 4 Pitch (mm): 16 - 100 Cross bars (mm): 3.2 - 8 Min. gap (mm): 2 - 20 Number of under wires: 0-3 Available materials: EN 1.4301 (AISI 304), EN 1.4571 (AISI 316Ti), bright steel Gap securing (common methods): Normal gap, under-welded wires, rings, compression springs, spacer sleeves Additional equipment options: Chain guides, slats, carriers, trough edges...

...Stainless steel wash trough without apron, featuring an integrated faucet bench for wall mounting with sturdy wall brackets. Length customizable. Wash trough with integrated faucet/storage bench for use with floor or wall-mounted faucets (including tap holes if needed), bent with an integrated slope towards the central drain, equipped with a built-in drain strainer and valve base 1 ½", with...

...Trough screw conveyors are suitable for transporting short and broken chips from machine tools in both wet and dry operations. A conveyor screw made of twisted square steel - with or without a core - rests on two highly wear-resistant support rails in the trough and is driven by a geared motor. The rotating conveyor screw facilitates a continuous transport process from the chip feed to the discharge point due to its incline.

...CLeverCon Trough Conveyor Design as MFB with Roller Stations CLeverCon trough conveyors impress with their thoughtfully simple design and solid, stable construction. With the continuous beam structures, longer distances can be bridged without many supports. As a customer, you benefit from our trough conveyors through maximum availability at low acquisition costs. Steep inclines can be overcome with profiled belts or special cleats. Depending on your preference, the frame constructions of our trough conveyors can be powder-coated, galvanized, or made of stainless steel.

... several advantages over batch processing: — continuous workpiece feeding — easy integration into production processes — facilitated parts flow That’s why our trough belt continuous blasting systems often replace conventional batch systems. They are also used as a replacement for overhead conveyor systems – as they impress with easy workpiece handling and an ideal blasting result. Type: Trough belt Application areas: for metal, for bulk materials, Additional features: continuous processing, continuous flow...

...Corten steel waterfall AQUA Block Fountain made of corten steel Model AQUA BLOCK Intended for connection to a water trough or freestanding on gravel. The fountain is in two standard dimensions available: 600mmx800mmx500mm 800mmx1200mmx800mm Please contact us for special dimensions. Delivery includes: - fully funcional inclusive pump, assembly instruction with assembly parts - level-grounded...

...Conveyor screws consisting of: Screw trough bent or screw pipe with flat steel flanges on the end faces. End plate with welded console for the external bearing support. Drive plate with welded consoles for the relocation of the drive and external bearing. External bearing as a pedestal bearing housing with precision rolling bearings, ALTERNATIVELY with flange bearings. Screw shaft made of thick...

... conveyors and trough conveying screws in nominal sizes ranging from 150 to 400 mm. They can optionally be equipped with a single or double shaft paddle mixer with adjustable paddles. A synchronization gearbox complements the design, enabling precise and efficient mixing during the conveying process. SHA's mixing screws can also be delivered with various special features, such as coatings for corrosion and wear protection. Nominal size: 150 to 400 mm...

...-The original BAUER shovel for handling and transporting bulk materials -simple pick-up using forks -can be emptied at any height by cable operated from the driver‘s seat -body walls with reinforced edging -special steel blade trim -sturdy frame -can be secured to prevent slipping Types available -Type BSE mechanical -Type BSE-H hydraulic -Type BSM mechanical, with trough opening for forks -Type BSM-H hydraulic, with trough opening for forks -Type BSI mechanical material:steel...

...With the trough belt blasting system for surface treatment of steel components, a continuous blasting operation for workpieces of varying sizes and geometries is possible.

... devices. Trough Belt Batch Systems (Steel Link Belt) Instead of a rubber belt, the trough belt batch system can also be equipped with a steel link belt (SLB), making it suitable for piece weights of up to 15 kg (600 kg batch weight).

... water connection or a canister. A level indicator reports the optimal fill level and indicates when the device is empty. Additional benefits of the Elmasteam 8 basic: - Easy-to-clean stainless steel housing - Steam pressure from 4.5 to 8 bar with high steam availability - Individually adjustable pressure ranges “Soft” and “Strong” for different cleaning tasks - Automatic “Eco” mode (operating pressure is reduced to 3 bar), conserves the environment, saves energy and costs - Lock mode for application pauses: handpiece and footswitch are deactivated - Intelligent...

...For connecting HF internal vibrators (IR) or HF poker vibrators (SR) 42 V or 250 V. 200 Hz. 230 V AC connection, stainless steel protective frame, Rittal steel sheet housing. Stable trough handle, 4 m (Öiflex) connection cable, as well as interchangeable electronic blocks.

...The REMA Bunker Belt is equipped with a pneumatic bunker door made of sheet steel and is based on the design of the REMA Trough Belt Conveyor MGF. REMA Bunker Belts and Bunker Walls are constructed from a robust sheet metal edge design in a segmented construction. The side sealing of the REMA Bunker Belt, a combination of sliding wear of the belt and an additional labyrinth seal, has proven...

... PE adjustment base under the base plate is fixed to the edge of the trough and optimally compensates for parallelism fluctuations of the carrier. This guarantees a consistently stable current transmission. Unlike competing products, water cooling or extensive cleaning efforts are unnecessary even at high amperage.

... up. Vibrating conveyors from MASUR ENERGIESYSTEME GmbH are very robust and require minimal maintenance. The troughs are individually bent from steel sheet. The vibrating motion is generated by an SEW geared motor and an eccentric shaft located beneath the trough. The conveying speed is variable and can be easily adjusted to meet our customers' requirements. Vibrating conveyors are often used for feeding material to horizontal size reduction machines.

...Purpose of Use Universal conveyors are versatile and primarily used in the bulk material industry, construction, and agriculture. Industry Examples Stationary trough conveyors or mobile conveyors as horizontal or steep conveyors. Designs Profile steel construction in galvanized finish or in KHL RAL according to customer specifications.

... Rössler Centrifugal Finishing System with separation and corn scrap dryer, recirculated water treatment 1 x Otec CF18 Centrifugal Finishing System for small parts 2 x SIGG Round Trough Vibrators 1 x Hösel Solvacs 1 Hybrid parts cleaning and degreasing system Others: Polishing, grinding, and matting benches, edge fibers Saws / Laser welding machine / Others...

...Stainless steel design: Cleaning, blowing out, drying, feeding system with chain transport, paint stripping system with belt trough,...

... for workpieces that require powerful deburring. The working container is made of steel sheet with a polyurethane lining. The vibration motor is equipped with adjustable unbalance weights. Gross volume: 25 - 1415 liters Drive power: 0.55 - 11 kW Power supply: 400V / 50Hz...

... connectors required). Electrification: Cable channel: Metal black 9005 powder-coated. Cover flap: Perforated metal, powder-coated according to color chart or 6018 yellow-green, 1016 yellow, or 5009 azure blue. Possibility to attach data and power strips to the underside of each cover flap. Accessories: Insert for flower trough/drink holder: Plastic black. Surface and frame colors download (0.6 MB) Conference table Pulse also available with T-foot (below).

...Conveyor screws essentially consist of the U-shaped trough and the screw shaft with wings. They are primarily used for internal bulk material transport (filter cake, pellets, wood). We manufacture our conveyor screws in standard design with pedestal bearings and packing gland seals. The construction forms for material transport can be selected from an incline of 0° to 90°. The construction length is variable depending on requirements. The materials for the screws can be supplied in standard steel and wear-resistant steel; plastic linings are also possible.