laboratory testing Germany

...Vibration and shock testing as an accredited testing laboratory, focusing on examinations according to the railway standard DIN EN/IEC 61373 for test specimens weighing over 5,000 kg and dimensions exceeding 5 m.

...In our testing laboratory, we offer a variety of destructive and non-destructive tests as well as product treatments for refinement. The scope of testing can be individually tailored depending on the product and requirements. The tests are conducted in accordance with the requirements of DIN EN ISO 9001 using measuring devices that are traceable to the Physikalisch-Technische Bundesanstalt PTB...

...Conducting a time-compressed laboratory weathering test to simulate damage caused by moisture, full-spectrum sunlight, and high temperatures. The following will be examined: - Lightfastness of plastics - Lightfastness testing for automobiles - Lightfastness testing for textiles - Weathering test on laminated safety glass - Weathering test on plastics...

... sheet for natural gas - Natural gas reference values - and much more Our Gas Quality Competence Center is, of course, certified according to DIN EN ISO 9001. The testing laboratory for natural gas analysis is accredited according to DIN EN ISO/IEC 17025.

... Through the synergy of using optimized, homogeneous steel from German production, decades of experience in the heat treatment of hardness comparison plates, and defined CNC processing, you receive a top-quality product "Made in Germany." Independent Calibration Our manufacturer-independent calibrations conducted by the DAkkS-accredited laboratory according to DIN EN ISO 17025 ensure the highest quality assurance of the SiB test block.

... sufficient, while the active B12 value may already indicate a deficiency. Do you suspect a Vitamin B12 deficiency? With this active Vitamin B12 Holo-TC test, you can check your active Vitamin B12 levels. - Convenient testing from home - Test for active Vitamin B12 status - Clear and understandable results - Results within 6 working days after sample receipt - ISO15189 certified European laboratory - Validated by clinical biochemist and physician...

...5 Slots | Lab and Test System | Type 12 The table system with the sought-after CompactPCI Serial system architecture is perfect for laboratory and testing environments. Equipped with a high-speed backplane featuring five slots, the device offers the computing power of CompactPCI Serial for desktop and workbench applications. Thanks to the expertise of Elma Electronic, the backplane boasts excellent signal integrity values and an outstanding cooling concept.

...Do you need an analysis of your metallic connection, but investing in your own testing equipment is too costly? We can help you—whether it's crimp, weld, or solder connections. A regular cross-section analysis is an effective measure for continuously improving and ensuring your connection quality. We cover all relevant steps in our in-house testing laboratory: from cutting, embedding, and polishing to visualization and documentation. Our experts are in constant close communication with you throughout the process. Send us your samples for inspection—we'll take care of the rest!

...Vacuum Generation Vacuum supply for laboratory measuring devices, calibration bars, and test benches for testing, calibrating, and adjusting Vacuum supply for pressure controllers (CPC3000, CPC6000, CPC8000) with absolute pressure measurement ranges or bidirectional measurement ranges...

... individual processes, such as laser welding, eroding, grinding, etc., we produce small series for testing, trials, and validation of computer simulations. Precise evaluations using a 3D coordinate measuring machine are part of our standards, as is our extensive laboratory equipment. Short pathways and a lean organizational structure enable us to achieve maximum flexibility and the shortest response times.

... the rules for local changes or repairs. Take advantage of our many years of experience in the field of calibration. TesT is accredited by the German Calibration Service (DAkkS, member of WECC) for on-site calibration of testing machines, for the quantities force, length and torque as well as a permanent laboratory for calibration of compressive force transducers ...

...Plant-Based Proteins Available Qualities: Various high-quality plant-based protein powders Areas of Application: For the industrial production of dietary supplements and food, beverages, cosmetics, sports, pet food, and animal feed. Quality Control: In-house Laboratory & Storage Very high quality & safety, ensured by consistent and thorough monitoring of our raw materials. This is our promise, which we stand behind with our APLANTIS QUALITY SEAL. Food Experts / Consulting / Compliance Testing...

...TC90) Mandatory Analyses: Extraction Testing FDA and EU: in water and n-Hexane according to CFR21 177 2600 Disinfection Resistance: Sanitary 3A Chemical Resistance: ISO 1817 Conformity Analyses: Heat Aging: ISO 188 Compression Set (DVR): ASTM D395 - ISO 815-B Mechanical Measurements (Tensile, Compression, Adhesion): ISO 37 / ISO 527-2 / ISO 604 / ASTM D 429...

...NIR Handheld for Plastic Detection. Easy to use and provides clear results in seconds, right on-site. Designed for use outside the laboratory. The near-infrared spectrometer comes with a pre-installed plastic database. It identifies over 30 typical plastics in under two seconds. All common sample types can be measured, such as finished products, waste, granules, flakes, and microplastics. With the MicroPhazir PC, even users without any spectroscopic background can reliably identify plastics.

... and faulty processes and products be avoided from the outset. For companies that wish to obtain or maintain ISO 9001 certification, regular calibration of testing equipment is mandatory. Since 1999, the German calibration service DKD, or the German Accreditation Body GmbH (DAkkS), has accredited our calibration laboratory according to DIN EN ISO / IEC 17025, among other things, for the...

... simulated. SEMKO is an independent testing institute and certification authority. As a customer, you can be assured that you are receiving a product that meets the highest quality standards. Therefore, Calix offers a 3-year warranty on all products. As a partner of the industry, Calix adheres to high quality standards such as Ford Q1, TS 16949:2009, and ISO 14001 for environmental management. Numerous leading automobile manufacturers such as Ford, Audi, VW, and Volvo count among the satisfied customers.

...The sensors can be used alternately without interrupting the ongoing CNC measurement. We also employ 3D stripe light scanners in combination with a photogrammetry measuring device for optical and tactile 3D coordinate measurement. This enables us to digitize and measure components ranging from small parts to large objects for you. And we can do this not only in our measurement laboratory but also on-site at your location. We use computed tomography not only for non-destructive testing but also for the complete measurement of components with...

...Maintenance of Transformers of All Types Transformers in an electrical distribution network represent a significant long-term investment of both money and labor. Therefore, appropriately planned care and maintenance of the devices is essential for uninterrupted operation throughout their entire lifespan. In our service center, equipped with its own laboratory and testing field, transformers of...

...In our own testing laboratory, we assess the magnetic properties of individual magnets as well as the products containing them, and we also test the strength of adhesive bonds. For dimensional control, we have a coordinate measuring machine (CMM), and we perform balancing on our own balancing machine. We are capable of designing or optimizing the most suitable solution using the finite element method (FEM).

...In recent years, we have frequently developed reference products for our customers or created entirely new concepts for health food products. We offer you non-binding advice on labeling, claims, and targeted development of your product. We produce samples for your external evaluation and consumer testing. We conduct sensory evaluations in our own accredited sensory laboratory and support the...

...Barium chloride dihydrate is primarily used for the purification of salt solutions in chlorine alkali plants, as a reagent for testing sulfate ions in the chemistry laboratory, and as a cleaning agent in the production of other barium chemicals and lubricant additives.

...Modern laboratory, testing, and processing machines enable us to meet a variety of customer requirements based on drawing specifications. Formed parts are manufactured using the following processing techniques: - Compression Molding (CM) - Transfer Molding (TM) - Injection Molding (IM + Cold Runner) By appropriately selecting the manufacturing process, material-friendly processing is ensured...

... system. The MX smoke extraction system is a smoke extraction duct with a general construction supervisory test certificate P-TUM-439, in accordance with the Building Regulations List A (Edition 2005/2), Part 2, item no. 2.36, tested at the Research and Testing Laboratory of the Chair of Building Climate and Building Services Engineering at the Technical University of Munich. The testing was conducted at room temperature with a negative pressure of 1500 Pa and at 600°C with a negative pressure of 500 Pa over a duration of 120 minutes according to DIN 18232-6 and prEN 1366-8.

... significantly reduced. The sealing effect is achieved through 4 spring lamellas, which are mounted in a fan-like arrangement in the carrier profile. Quality Features of Separator Plate Seals Type MMT Like all products from Möller MetallDichtungen GmbH, the separator plate seals of type MMT meet our high quality standards. Regular testing in our laboratory and production-related quality assurance...

...Are these small parts or individual items? Or is it about testing a new process? Then a large-scale production line doesn't make sense. Hand or laboratory systems are manufactured by us according to customer specifications.

...and Fraunhofer Institute Stuttgart according to DIN EN 20140-3. Sound insulation: Multiwal has documented the latest test reports for sound insulation according to DIN EN 10140-2 / 20140-3 laboratory values from international testing institutes.

... adapters - Contact force up to 2,000 N - Modular system with a wide range of additional functions - Available for all common test system interfaces - MA xxx series: For laboratory and small series - MA 21xx series: FKT/ICT testing for medium-sized series - MA 32xx series: FKT/ICT testing for large series...

...Tool No.: 1583/292 Operating Weight: 47.11 kg Raw Weight: 44.91 kg Diameter: 719 mm Alloy: AIZn10Si8MgK This top plate is used in an air suspension system employed by the railway. High demands are placed on the mechanical properties as well as the casting structure. These properties are verified through tests (such as X-ray, crack testing, etc.) in an accredited testing laboratory. This casting...

...MA micro automation developed a highly flexible production system for the manufacturing of Point-of-Care (POC) rapid tests in the field of near-patient laboratory diagnostics. It is variable in use for the production of different products and can be configured multiple times. The development encompassed the entire process chain, from plastic molding to testing and packaging. With one system, over...

...Excellent performance with porous vacuum componets Manufacturers around the world trust our porous materials to deliver excellent performance when used as vacuum components. Anti-static additives can also be introduced for applications that require conductivity. Ensure purity–Material is backed by the Certified Pure POREX™ program of independent laboratory testing of leachables, extractables and...