strip steel Germany

... glass-ball reinforced, black Material selection tubes: — Carbon fibre, glossy finish — Aluminium, anodised — stainless steel — Steel plastik covered Strip handle Material selection handle strip: — Aluminium Material selection cover caps: — PA glass-fibre reinforced plastic Other sizes, other colors on request...

...CORMIFLEX® tubes are folded spiral-seam pipes made of high-grade steel precision strip. Reaching up to 350°C, their high temperature resistance is predominantly used for exhaust gas routing in passenger car, utility vehicle, RV and marine heating units. CORMIFLEX® PLUS bears additional resistance against corrosion due to salt and other aggressive agents.

... per meter); useful height: 91 mm For the protection of gutters with edges of Ø 12 to 30 mm Suitable for pigeons and seagulls. Tops Ø 1.3 mm or Stainless steel band: Length 100 cm, V2A stainless steel tops Ø 1.80 mm With 4 tabs / Height 11.5 cm. The base strip can be easily cut to the desired length with sheet metal shears. V. E.: 60 m (60 modules of 100 cm) / Ref. ES2102DR or Stainless steel band: Length 50 cm, V2A stainless steel tops Ø 1.58 mm. With 2 tabs / Height ± 11 cm. The base strip can be cut to the desired length with sheet metal shears. V. E.: 40 m (80 modules of 50 cm) /...

... formed from the steel strip which is joined in a second step – at the same time, the container rotates spirally. The tight and stability supporting connection of the steel band can be effected by the LIPP Double Seam as well as the LIPP Welding Technology. Compact and space saving High functional safety Reduced retention time in the digester Reduced energy losses during storage Low maintenance...

...The CONEC D-SUBminiature connectors comply with the dimensions of IEC 60807-2 (formerly DIN 41652) or MIL-C-24308. The cable-device connectors consist of a pin and socket strip and are available in five standardized housing sizes with pin counts of 15, 26, 44, 62, and 78 pins. Housing frame: Tin-plated steel, optionally tin-plated brass or stainless steel Pin count: 15, 26, 44, 62, and 78 pins. Connection type: Straight/angled solder pin, press-fit pin, solder cup, crimp Current carrying capacity: Up to 7.5 A...

...Two-part wear strip, consisting of a 3mm thick wear strip and a 9mm strong carrier strip Material: rust and acid-resistant steel Using the existing mounting threads, the installation of the carrier strips on the AMC rack is straightforward The wear strip is precisely connected to the carrier strip using metallic Velcro Quick and efficient replacement of damaged or worn wear strips with the help of a lever tool at various positions Multiple changes of the wear strip are possible...

... drive Motor: Three-phase geared motor 230/400 V 50 Hz (60 Hz) Speeds: 4, 6, 12, 16, 24, and 30 m/min. Standard Control: Optional via frequency converter Chain type: Steel hinge chain, optionally in stainless steel or hardened version Belt support: Via plastic sliding strip Supports: Fixed, swivel, and mobile Side guidance: Fixed or adjustable width and height Number and spacing of tracks: According to customer specifications...

...We stock welded precision steel tubes Cold drawn according to EN 10305-2: • Variants: +C, +A, +N • Material: E195, E235, E355 • also with restricted tolerances Hot rolled according to EN 10305-3: • Variants: +CR 1/2, +A, +N, also with scraped internal seam • Material: E195, E235, E355 • made from cold strip, from pickled hot strip, and in galvanized version Flat oval tubes · Elliptical tubes Dimensions of round tubes: 6 – 17, 18 – 26, 27 – 39, 40 – 55, 56 – 98, 100 – 200 Dimensions of oval tubes: 20×10 – 100×25, 30×10 – 60×30...

...Flat steels, round steels, angle steels, T-sections, and special profiles. Equal leg angle steel DIN EN 10025 / DIN 1029 Unequal leg angle steel DIN EN 10025 / DIN 1029 Flat and strip steel, bar steel in grade S235 JRG2 Round and square steel S235JRG2 DIN EN 10025 U-steel, round edge, DIN EN 10025 / DIN 1026 For more information on dimensions, please visit the company website.

...Manufacturing of flat springs according to customer specifications up to a material thickness of 3.0 mm as needed We are manufacturers of flat springs and produce them from various spring strip steels. Typically, we process spring strip steel up to 3.0 mm thickness. Most flat springs undergo thermal post-treatment. Upon request, we offer various surface coatings.

...Special Profiles & Custom Profiles - Tailored to Customer Specifications We produce and manufacture special profiles according to your requirements and wishes in the shortest possible time. HERMANUSSEN offers solutions for the construction industry, vehicle manufacturing, and much more. We are happy to advise you and support you with your project. Material Grades - Hot-dip galvanized strip steel - Hot-rolled strip - Cold-rolled strip - Painted and nickel-plated strip steel - Stainless strip steel - Non-ferrous metals...

...Cutting discs, precision cutting discs, boron nitride, CBN, ø35, ø50 thickness 0.3 mm to 3.0 mm, high durability, grinding of notches with high dimensional accuracy in strip steel cuts.

...Clean Business We ensure clean surfaces. In our Konti spiral pickling process, oxide layers or rust are completely removed using sulfuric acid. This prepares the strip optimally and can be further processed directly by us if desired. It is also possible to re-pickle strip steel that has become rusty and shows water spots due to long storage or weather influences. Often, this allows the material to be returned to its originally intended use without the need for declassification or scrapping. The goal: A clean material as the best prerequisite for subsequent processes.

...In the field of strip bending technology, we not only offer traditional bending techniques but also the ability to deform strip steel using the stamping bending process. Strip Bending Parts In the field of strip bending technology, we not only offer traditional bending techniques but also the ability to deform strip steel using the stamping bending process. Furthermore, we also produce stamped...

...As a stamped part, we refer to stamped components made from strip steel or spring steel from coils – often stainless steel – that cannot be bent into another shape after the stamping process.

...Sheet metal parts, partially bent, with embossing, cutouts, and threads, e.g., wall brackets made of galvanized strip steel DX51 D+Z275...

...GitterStar welded press grates are made from strip steel. The cross bars are made from drawn and twisted or round wire, which are pressed into the load-bearing bars and welded at all intersection points to achieve an exceptionally high load capacity of the grate.

...We offer you stamped and bent parts as well as leaf springs in dimensions ranging from 0.08 mm to 3.00 mm and up to 300.00 mm in width. Your products are manufactured from strip steel using progressive die tools. The parts are stamped and bent on stamping machines as well as stamping and bending machines. The components, which are used in fields such as mechanical engineering, medical technology...

...e.g. Clamping bushings according to PN3000 (similar to DIN 1498) slotted hollow cylinders with various slot shapes made of tempered strip steel with high elasticity and great wear resistance. We produce every type of bushing on Bihler machines, achieving special material efficiency and high output quantities. On our Bihler RM40B, specifically designed for bushings, we manufacture bushings with and without collars at rates of up to 400 pieces per minute.

...Our mirror mounting plates are made from galvanized strip steel, making them suitable for damp environments, and can be provided with adhesive tape upon request. Of course, all plates are available with and without adhesive tape. For custom sizes, we would be happy to provide you with a tailored quote.

...The BFI shapemeter rolls that we produce under licence from the VDEh-Betriebsforschungsinstitut (BFI) have a solid roll body with a homogeneous steel surface. They are normally installed instead of the existing deflector rolls. For the measurement of wedge-shaped strip, Vollmer offers a special solution that is also based on the BFI patent. It ensures that the flatness of the strips is...

...A supplier of high-quality Bowden cables and assembled wire ropes had a special requirement for a new machine. It needed to cut and strip insulated steel strands as well as cut non-insulated steel cables, without the individual wires springing apart or the cable ends thickening during the separation process. The company Metzner Maschinenbau has responded to this request by developing an automatic...

Semi-finished products and components according to drawings made from special materials. We supply for prototypes as well as series production. Tungsten, Molybdenum, Tantalum, Niobium, Titanium, Nitinol, Kovar, Invar, Hastelloy, Monel, Inconel, Incoloy, Alloy 42, Tungsten Copper, Tungsten Carbide, Iridium, Platinum. Technical ceramics: Al2O3, ZrO2, SiC, AlN, Si3N4, BN, Cordierite, Steatite, Alum...

...Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material...

...resin and glue). Module for wall installation consisting of a stainless steel pressure tank with 10 or 15 litres, fluid filter (100...120 my), as well as one or more valve modules and a service unit. Due to the possibility of regulating the fluid pressure independently of the spray pressure, our MDJ system is also very well suited for larger transfer, profiling or automation systems with a large number of spraying points. We will be happy to plan a special system with you. Simply contact us. Pressurized tank:stainless steel...

...We strip used items and coat them as good as new!

...We strip your multi-coated substrate holders without the use of abrasive materials, such as blasting sand. This optimized stripping process combines the following advantages: No residues on the surface No incorporation of foreign substances into the substrate surface Shorter pumping times Fewer arcs during the etching and coating process Fewer "non-turned" parts No "blasting damage" and warping of the holders Less debris and fewer defects in the coating More cost-effective than sandblasting Possible coatings: DLC, WC/C, AlCrN, TiAlN, ZrN...

...Copper, nickel strike, sulfamate nickel, tin, or even silver in various combinations are applied in our strip coating facility.

...Wide Bandsaw / Band Saw Blades - from 50mm to 311mm - Stellite Tipped / Swaged - Production of bandsaw blades between 50 mm and 311 mm width. Available in the following styles: - toothed - welded - straightened and tensioned - swaged - set - stellite tipped Steel Qualities: - CR-100 swedish - CR-200 extra - CR-300 special - CR-400 PREMIUM - CR-400 Xtreme Coils...

...Seagull spikes can be easily customized by the user at predetermined breaking points - Arrangement of the bird spikes in a U-shape on the strip - High-quality and rust-free stainless steel - animal-friendly bird deterrent - Effective protection against bird droppings, pathogens, and noise disturbances caused by birds...