bar turning Germany

...Turning short material bars profitably and flexibly With a short bar loader, the machining performance of any CNC lathe can be optimized by reducing non-productive times. An additional advantage is that leftover pieces can be reprocessed. Two versions of short bar loaders are available: ILS-RBK and ILS-MUK. Since the short bar is fully pushed into the machine spindle by the loader, the spindle...

...Materials: all common brass and aluminum alloys Dimensions: on curved and CNC-controlled lathes from bar stock in the diameter range of 3-65 mm chuck machining up to a diameter of 200 Quantities: small, medium, and large series Post-processing: turning, drilling, milling, sawing on appropriate post-processing machines Surfaces: ground surfaces as well as all galvanic and thermal post-treatments by external partners...

...The equipment of the machines is tailored to the requirements of plastic processing. In the manufacturing area "CNC Turned Parts," components with a center distance of up to 800 mm and a turning diameter of up to 80 mm from bar stock, as well as a diameter of up to 400 mm from a chuck, are produced. The equipment of the machines is tailored to the requirements of plastic processing. They...

... personal. For example, you can have the back of a bar engraved with who the gift is from, for whom it is intended, on what occasion, and when.... Companies and associations can also have logos or similar designs engraved on bars or commemorative medals, thus turning the gold or silver into a branded product. Our silver French fry fork from Silver-Picker is also a popular choice for engraving as a gift.

...CNC Lathe - Bar passage > Ø 50mm > Z 300mm - Year of manufacture: 2011 Bo-Tec GmbH specializes in contract manufacturing of CNC turned parts and CNC milled parts (5-axis). We are characterized by high flexibility and customer-oriented thinking. Our services: CNC 5-axis milled parts | CNC 5-axis milling work | Contract CNC turning | CNC milling work | CNC precision parts | Contract milling | Mechanical engineering | Mechanical components | Contract mechanical components | Contract welding | Special machine construction | Fixture construction...

...Pallet size 400 x 400 mm Travel paths: 1,035 x 535 mm Working area: 1,000 x 500 mm TURNING - CTX beta 800 V6 with bar feeder for square machining - CTX beta 800 V6 with short bar feeder - CTX alpha 500 V6 with automatic part loading Turning lengths: Up to 3,500 mm Turning diameter: Automated up to 100 mm, Standard up to 450 mm...

...CNC – Milling; CNC – Milling 3 and 4 axes up to 2000 mm x 500 mm Processing of parts in clamping tools Further processing of round and flange parts CNC – Turning Bar processing up to 60 mm Chuck parts up to d = 200 mm Processing of steel, non-ferrous metals, plastics...

...Off-the-shelf and as a workpiece On multi-axis CNC-controlled turning and milling centers, turned parts are completely machined. With driven tools (C and Y axes), complex machining can be performed in a single setup. Through automation such as handling systems, portal loading systems, and bar loading magazines, batch sizes of 500 to 10,000 pieces can be produced economically. Maximum turning capacity for workpieces Ø400 mm / 1000 mm long Maximum bar passage up to Ø100 mm Bar passage up to Ø100 mm complex machining on turning and milling centers...

...Modern CNC technology offers the highest level of precision and consistently high quality. On our lathes from the brands Gildemeister, Weiler, and GDW, we manufacture precision turned parts, as well as decorative turned and milled parts in single, small, medium, and large series from materials such as steel, stainless steel, and various non-ferrous metals. CNC Automatic Turning: • Bar diameter...

...Processing of almost all materials such as: cast iron, steel, stainless steel (V2A, V4A, etc.), non-ferrous metals, aluminum, plastics, hard fabrics, etc. We are also happy to be your cooperation partner, meaning your contact for turning, milling, drilling, and grinding, taking on overall responsibility including heat and surface treatment. Turning parts up to Ø 70 mm (in bar), up to Ø 300 mm (in chuck), milling parts up to the space corner dimension 600 x 400 x 500 mm...

...Available sealing materials are NBR and Viton. In addition to the standard version in steel, valves in 1.4104 and 1.4305 are also possible. Other materials and designs available upon request. When used with our screw-in sleeves ESH, the valves can be screwed in. By turning in the sleeve, the flow direction can be reversed.

...CNC turned parts as bar work up to Ø 70. CNC turned parts as chuck parts up to Ø 250 x 1000 length with driven tools and steady rest. CNC turned parts Ø 300 x 250 with milling and drilling operations. Complex turned parts with driven tools, B-axis, and Y-axis.

...Single and series production in aluminum, stainless steel, steel, and plastics • Powered tools enable the production of finished parts: o turned o drilled o milled o notched o internal hexagon • Bar loaders help save costs through multi-machine operation. • Twin-spindle machines with multiple axes and rotating tools increase positional tolerances.

...● Bar turning parts up to Ø 200 mm ● Rod turning parts up to Ø 55 mm ● Between centers machining up to Ø 150 mm with lengths up to 700 mm ● Conventional turning operations of all kinds up to Ø 300 mm and 1000 mm in length CNC lathes with driven tools from the brands MAX – MÜLLER and GILDEMEISTER Lathes from the brands VDF and UMA ● Workpiece clamping with 2-, 3-, and 4-jaw chucks, faceplates, expanding and collet chucks, as well as tailstocks and live centers...

... pressure: up to 350 bar / 5000 PSI Throttle Valves for Manifold Mounting DVP ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Cartridge Assembly DVE ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for direct installation into...

... at the highest level. E-METALS all copper, copper-zinc alloys such as: CuZn39Pb3, CuZn38Pb2, CuZn40Pb2, CuZn21Si3P (Cuphin/Ecobrass), CuZn35Pb1.5AlAs (Deziron), CuZn36Pb2As, CuZn36Pb2AlAs, further alloys available upon request. DIAMETER Bars, tubes, profiles with an outer diameter from 8 mm to a maximum of 65 mm. SPECIALS Milling/drilling processing with driven tools complete processing from the bar with back and internal machining flat grooves burr-free processing surface from Ra 0.25 µ...

...Max. turning diameter over bed 380mm, max. turning diameter over support 190mm, max. turning length 750mm, bar passage 56mm, 2000 RPM. 3-axis digital display.

... mechanical engineering, engine and gearbox manufacturing, and general mechanical engineering. We are always capable of producing parts in our usual high quality for industries not yet listed here. For the production of our parts and for assembly work, we use a variety of materials such as non-ferrous metals, steel, cast iron, stainless steel, and plastics. Using these materials, we not only manufacture individual turned parts but also process cast and forged blanks, bar stock, and carry out the finishing of semi-finished components. Assembly work such as...

... machining units. In a multi-spindle machine, the bar material or pipe material/automatic turned parts are distributed across several workpiece spindles and processed simultaneously by different machining units. Multi-spindle lathes and rotary transfer machines have a very high setup time to configure the machine for the parts to be produced. Therefore, the production of CNC precision turned parts and automatic turned parts is only worthwhile at very high quantities.

...Everything here revolves around superlatives. CNC Turning at Mechanic X Parts Overview: • CNC lathe, type Gildemeister CTX 310 • C-axis and driven tools • Turning diameter between 10 to 250 mm • Turning length up to approx. 400 mm • Tube and bar processing possible • Production of individual parts, small series, and medium series • Processing of steels, non-ferrous metals, and plastics...

...CNC TURNING 5-AXIS; Milling operations possible in a single setup; All turned parts are deep hole drillable in a single setup - Bar material Ø 5-45 mm - Chuck parts Ø 5-100 mm - Length of up to 140 mm - Milling operations possible in a single setup - All turned parts are deep hole drillable in a single setup...

...Several lathes from the manufacturer Mazak are available for CNC turning. Workpieces with a diameter of up to 250 mm can be processed to a length of up to 600 mm. The installed bar loading magazine allows for cost-effective production of series parts.

... be produced on multi-axis turning machines with counter-spindles, bar loading magazines, and driven tools. We process all machinable materials such as steel, cast steel, stainless steel, non-ferrous metals, aluminum, plastics, etc. Design: horizontal, vertical Bar loader: up to Ø 42 mm Loading system: automatic Max. workpiece size: Ø 600 mm Max. turning length: 1,500 mm...

...PRECISION TURNING. Flexibly and precisely, we create complex prefabricated parts from metal and plastic according to your drawings or samples. Maintaining consistently high quality even for larger series. CNC Turning: Our Machinery CTX 400 GILDEMEISTER CTX 400/E (with driven tool) • Travel path X 300 / Z 600 CTX 510 GILDEMEISTER • Chuck diameter mm 250 / 315 • Bar passage mm 76 (90) • Plan path X mm 400 (265) • Vertical path Y mm ± 60 • Longitudinal path Z mm 1,050 • Drive power (40 / 100% duty cycle) kW 42 / 31 • Torque (40 / 100% duty cycle) Nm 670 / 495...

...In our turning area, several numerically controlled lathes are available. Materials: Stainless steels, stainless steel, aluminum alloys, plastics, copper alloys, titanium Technical Information: Turning diameter: from Ø2 to Ø250mm Bar passage: Ø32mm and Ø50mm Maximum distance between centers: 600mm...

...2 EMCO E 65 with Bar Loader Passage: 65 mm • 12 driven tools • Bar loader • Automatic workpiece removal We look forward to your inquiry!

...CNC turned parts in all batch sizes and every quality requirement. For turned parts, we consistently use highly flexible CNC-controlled turning centers. This enables efficient single and series production as well as complete machining of complex workpieces in a single setup. In our modern turned parts manufacturing, bar material can be machined up to a diameter of 30 mm. We can process insert...

...Individual parts | Small series | Medium series; From design to series production; CNC and conventional From design to series production - CNC and conventional - Turning diameter up to 550 mm and turning length up to 2000 mm - Bar turned parts up to diameter 50 mm with automatic workpiece loading and unloading and Demel precision engineering process monitoring...

... VC560, year of manufacture 2006 - Spinner BAZ VC860, year of manufacture 2009 - Behringer/Eisele LM circular saw fully automatic, year of manufacture 2010 - Kaltenbach LM circular saw fully automatic - Rösler vibratory finishing system - Spinner TS77 turret lathe, special modification with 6m loading magazine - Lescher special machine for drilling, threading, sawing from 6m profile bar - Schmid special machine for drilling, threading, sawing from 6m profile bar - Various conventional machines for drilling, punching, turning, sawing...

...From a turning diameter of 2–80 mm in bar production, up to 300 mm diameter and 800 mm turning length as a chuck part.