threaded parts Germany

... Stainless steel flanges come in several types to suit different applications: Weld Neck Flanges: Designed to be welded to the pipe. Suitable for high-pressure applications. Slip-On Flanges: Easily slide over the pipe and are welded in place. Socket Weld Flanges: Used for smaller, high-pressure piping. Threaded Flanges: Attached without welding, ideal for low-pressure applications or pipes with a thin wall. Blind Flanges: Used to seal the end of piping systems or pressure vessel openings. Lap Joint Flanges: Used with stub end fittings for applications requiring frequent dismantling.

...polyTOP is a weather-resistant enclosure made of fiberglass-reinforced polyester. Available in a variety of standard sizes, it is ideal for all types of electronic and electrical installations. Its base is originally equipped with mounting brackets featuring M6 threaded sockets, allowing for the installation of mounting plates or printed circuit boards. The cover screws of the enclosure are made...

... transitions from the tube to the component — Coated tube fastening screws to seal the threaded hole and secure the screws — Delicate appearance through the connection of narrow profiles (e.g., square to round) — Protection class IP65 — Modular design allows for retrofitting with adapters (narrow housings) or tilt adapters — Thoughtful ergonomics for easy and fatigue-free operation — Ideal solution from a single source for BERNSTEIN control housings Feature: Aluminum, modular...

...Process connection with thread for direct screwing Design with internal membrane Pressure compensating parts screwed Universally applicable...

...We supply spindles as standard parts from stock or as custom parts according to drawing, in both rolled and forged versions. Manufacturing processes: Thread rolling, thread whirling, thread cutting, thread grinding Materials: C15, C45, V2A, V4A, Aluminum, 42CrMo4, special materials Dimensions: from ø5 to ø350, lengths up to 25 meters are possible Pitch: According to DIN or as a custom version (single or multi-start) Processing: according to customer specifications Surfaces: sliding coated, blued, galvanized, gas nitrocarburized, or according to customer specifications...

...Flexible and versatile solutions for the installation of inserts after molding in thermoplastics and thermosetting plastics. SPIROL's installation machines provide the ideal foundation for standalone systems and enhanced assembly systems offered by SPIROL. Optional equipment and features include: - Vision detection for the presence of parts - Automatic identification of devices - Customized rotary or linear movement of the fastening device - Password protection for HMI screens - Key reset - Status / Indicator lights - Fault alarm - Park marking...

...When it comes to sophisticated plastic injection molding, we are completely in our element. We process all common thermoplastics, from standard to high-performance plastics. A fully automated production with handling systems for part removal and QA tests guarantees an economic production of your parts. We also have experience with the overmolding of various inserts such as threaded bushings...

...{"Capacity":"Installation of left-threaded crimp nuts M3 to M10 in all materials and M12 in aluminum and steel","Material":"Aluminum, steel, plastic","Supplies":["2 double open-end wrenches 24/27","1 hex screwdriver 4 on flat","1 bottle of hydraulic oil 100 ml","1 funnel","Maintenance booklet with spare parts list"],"Technical Specifications":{"Stroke, adjustable, max":"10 mm","Hose connection...

...ER collet chucks DIN 6499 with length compensation built-in axial compensation A wide range of ER collet holders, clamping nuts, and matching cutting tools available from stock. Our extensive range for workpiece and tool clamping provides everything you need for the production of your turned parts. Benefit from our diverse portfolio of clamping tools for CNC long-turning, short-turning, multi-spindle lathes, and rotary transfer machines. Upon request, we can customize these in our in-house grinding and erosion service according to your requirements.

... Version: Hardened locking pin, ground and polished. Threaded sleeve polished. Non-hardened locking pin, ground and polished. Note: Locking bolts are used where a change in the locking position due to lateral forces should be prevented. Only after manually releasing the bolt can a different locking position be engaged. If the release is to occur over a longer period and a return of the locking pin...

...Piping system made of high-quality NiroSan® press fittings (stainless steel fittings) with a molded seal made of EPDM (ethylene-propylene-diene rubber) and NiroSan® stainless steel pipes according to DVGW worksheet GW 541 or DIN EN 10312. All NiroSan® stainless steel fittings are manufactured from materials 1.4404 / AISI 316L (stainless steel molded parts) and 1.4408 (threaded parts, stainless...

... cladding • Threaded sockets DIN 11851 made of solid C22 • Legs with forklift pockets made of 1.4301 Surface Treatment: • Weld seams inside ground flush • Inner surfaces ground to grain 240 (Ra < 0.8 μ) • Inner and outer surfaces pickled and passivated Operating Data: • The vessel is designed for a maximum operating pressure of -0.05 (0.95 bar abs.) to +6 bar at -10/110 ℃. • Acceptance according to DGRL, Cat. IV, Module G...

...Part-threaded bolts / double bolts in thin and full shank versions - turned and drawn parts Dimensions Metric ISO thread according to DIN 13 standard thread M 2 – M 72 as right-hand and left-hand threads Metric ISO thread according to DIN 13 fine thread M 3 x 0.35 – M 52 x 3 as right-hand and left-hand threads Whitworth thread according to DIN 11 UNC and UNF threads Pipe threads according to DIN...

...At alstertaler schrauben & präzisionsteile, you will find petro-chemical fasteners in various designs and made from a wide range of materials, including Studbolts with metric fine threads according to DIN 976, as well as bolt-nut combinations with UN threads. Learn more on this page about the extensive range of petro-chemical fasteners from alstertaler. We are your strong partner for threaded bolts according to petro-chemical standards as well as for proven CNC turned parts, CNC milled parts, and bent parts.

... integrated support membranes and overload protection reduces additional design expense in many applications, e.g. for external overload protection or guiding the parts introducing force to the cell. The result is that less space is required, less material is used and less weight is involved. Last but not least, there is hardly any friction on components that could falsify the measurement result...

...Anodized aluminum front panel, threaded bolts for blind hole mounting on the back, anodized undercoat.

.../s, amax > 500 m/s². — High static and dynamic moment loading capacity. — Same load ratings for all load directions. — Compact design. — Interchangeability. — Guide rails can be screwed from above (countersunk screw head) as well as from below (threaded). — Standard reinforced steel covers on the end faces. — Standard double-lip seal. — Special surface coatings are available.

...Water sack tubes protect pressure measuring devices from pulsations of the measuring medium and from excessive heating. The water sack tubes according to DIN 16282 in U-shape, Form B, and circular shape, Form D, feature a welding connection for pressure extraction to the process and a threaded connection for the pressure measuring device. In the 'commercially available' versions, threaded...

...With milling work from the front and/or back, if desired also with threaded holes or threaded welding pins or facets. The labeling is engraved but can also be produced as screen printing for larger quantities. The back sides of the aluminum plates are usually anodized but can also be offered in a chromated (ROHS-compliant) version. Painting of the front side and edges is also easily possible. For stainless steel, the holes and cutouts are laser-cut or punched. We at the engraving shop Jegel in Berlin also engrave and mill your supplied front or back plates.

...Trapezoidal Threaded Spindle, Rolled Version Ø10-80 Available from Stock Technical Data Diameter: Standard: 10 – 120 mm Pitch: Standard: 2 – 24 mm Number of Starts: 1-6 Direction of Rotation: Right-hand/Left-hand Length: Standard: 3000 mm Ø20: 6000 mm, Longer lengths up to 11000 mm available upon request Material: 1.0401 (C 15) ...

...Load capacity 7.5 to 10 t Spindle adjustment up to 2070 mm various options and load adapters Heavy-duty support blocks / bracing blocks for commercial vehicles Heavy-duty support blocks / bracing blocks for commercial vehicles 7.5 to 10 t load capacity Continuously adjustable in height via threaded spindle Extremely robust and stable welded construction Spring roller chassis Block roller chassis Various load adapters BUILDING HEIGHT: 1410 mm FINAL HEIGHT: 2070 mm WEIGHT: ~ 50 kg FOOTPRINT: Ø 820 mm LOAD CAPACITY: 8000 kg TYPE: AV 8 long ADJUSTMENT RANGE: 660 mm...

...Complete Solutions for Front Panels Complete front panels consisting of a membrane keyboard (or front foil) and a front plate made from various materials such as aluminum, steel, or plastic, featuring appropriate cutouts and fastening elements (e.g., press-fit threaded bolts).

...Manually driven rotary indexing table RSE-6-M from Friedemann Wagner GmbH. Patented automatic locking after rotation in the end position – pneumatic unlocking. ** Technical Data ** Division 2|3|4|6|12 Rotation direction left | right Rotation direction convertible Division convertible (conversion kit, accessories) End position detection via sensor Matching and threaded holes in the plate for...

...This skimmer is simply placed in the shallow zone. Ideal for pool construction, koi ponds, and also for the ambitious garden pond. This skimmer is optimally matched to the body and provides the flow with a perfect water intake (suction). A solid stainless steel 2" threaded connection and a shut-off ring against gravel and substrate complete the elegant design. You simply place this skimmer in...

...Manufacturing of Weld Pins for Stud Welding with Tapered Ignition Weld Pins for Stud Welding with Tapered Ignition - Threaded Pins (Type PT) - Internal Threaded Socket (Type IT) - Pin (Type UT) - Coarse Threaded Pins - Paint Groove Pins - Flat Connectors, Double Flat Connectors - Insulation Nail - Clip for Insulation Nail (Type R) - Clip for Insulation Nail (Type R, Outer Diameter 11.5 mm) - Clip with Plastic Cap for Insulation Nail (Type W) - Disc Pin, Insulated Disc Pin - Silicone Cover Caps...

...The EGE family of inductive standard sensors made in Germany includes robust inductive proximity switches, sensors with optimized EMC stability for increased demands, as well as sensors for long switching distances up to 160 mm and hysteresis for detecting large moving metal parts such as pipes, profiles, or plates. In addition, EGE offers standard threaded designs and sensors with smooth sleeves...

...Grease lubrication of unsheltered parts subject to heavy loading and/or impacts, such as friction, rolling and pivoting bearings, splined shafts, knockout spindles, threaded spindles and sliding surfaces of all kinds For harsh operating conditions Advantages and benefits Excellently suited as a safety lubricating grease in mixed friction sector with especially good wear protection Effectively...

...Multi-compartment packaging system with five removable individual units for threaded male parts, milling cutters, and shanks Versatile packaging that combines single cells into a single package The detachable units make it efficient and easy to use Prevents repackaging into individual items...

... usual fastening method using long threaded rods, the EKR Mono stands out due to its particularly high stability and very easy installation. The ceramic is made from high-quality glass-sintered aluminosilicate, whose excellent material properties allow for multiple cleanings and thus a particularly long product lifecycle. With seals approved by KTW (ELL), suitable for drinking water treatment. Show complete detailed description Show less...

...The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4026-45H. Dimensions and tolerances depend on the current status of the standard. The threaded pins with hexagon socket have a universal thread and are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a...