smd components Germany

...In SMD assembly (SMD = Surface Mounted Devices), electronic components are placed onto the surfaces of printed circuit boards, also known as PCBs, using placement machines.

...SMD format temperature sensors have been designed for automatic assembly on electronic circuit boards in high-volume applications where long-term stability, interchangeability, and low costs are crucial. SMD sensors are used, for example, for temperature compensation on electronic circuit boards. Standard SMD elements are available in platinum (Pt) with a temperature coefficient of 3850 TK. Technical Specifications SMD sensors are configured as follows: Temperature coefficient (TK): 3850 Temperature range from -50°C to +150°C Available in platinum (Pt)...

...5 m flexible LED strip with SMD LEDs Tightly packed for homogeneous light distribution Self-adhesive Can be cut between units, with solder pads Must be mounted on a thermally conductive surface for cooling When mounting on electrically conductive material, ensure insulation at the connections Bend radius at points with components min. 20 mm; stick without pressure Cool white available on request Check the solder joint temperature of an LED Light color neutral white...

...In modern electronics manufacturing, precision is crucial. Our SMD placement stencils guarantee the highest accuracy in placing your SMD components on printed circuit boards.

...Counting and marking the components of an open reel allows inventory management with maximum accuracy. The enormous advantage of printing on the cover t ape lies within the lack of necessity for more than one counting per reel. Never recount another reel. SMARTcount is a reliable, fast, easy to operate machine with high performance. SMARTcount is designed to code reels of SMD components to enable...

...Fully automated and manual assembly of all common SMT components, flip chips, or CSP (Chip Scale Package), as well as processing of highly sensitive components on all substrates.

... fully automatic packaging machines with 3D vision systems. Thanks to our well-organized warehouse with over 500 different blister tapes and quick access to more than 1000 blister tapes, we can offer short lead times. For special components, we can design a custom blister tape for you in no time, not only for the packaging service but also as a commercial product.

Since our founding in 1987, we have gained over 30 years of experience in the field of electronic drive technology, as well as in the EMS service sector, particularly in power electronics. Through our in-house electronics development and production, we support our customers from the initial idea to series production, as well as throughout the entire product lifecycle. Our service offerings inclu...

... available encapsulated in plastic housings or vacuum impregnated in open designs. All transformers can be manufactured with UL-approved insulating materials if required. The connections of the transformers are designed for solder pins. The pin configuration can be customized, providing additional flexibility in PCB design. Transformers are generally mounted directly by soldering onto the PCB (THT mounting). Smaller sizes can also be produced in an SMD mounting version. Larger sizes come with additional screw mounting.

Asmetec GmbH, founded in February 2007, is a manufacturer and dealer operating throughout Europe, specializing in technical specialty products primarily for use in the printed circuit board and assembly industry, electronics manufacturing, and the general technical industry. Asmetec is certified according to DIN EN ISO 9001 and 14001. Benefit from direct sales from the manufacturer!! Brand MET...

... pulses as well as the largest power levels. The specific implementation varies depending on the application: while signal couplers aim to transmit the signal shape as accurately and promptly as possible, transformers focus on minimizing power losses. We cover all application purposes with a wide range of products. All designs are also available as SMD.

...We manufacture electronic and electromechanical assemblies according to customer-specific requirements. Our services include: • Data preparation • Analysis of your data for plausibility and feasibility • Optimization of data for production • Creation of production panels • Material procurement (e.g., circuit boards, stencils, components) • Design of assembly aids and test adapters • Fully automated SMD assembly • Reflow, wave, and selective soldering • Optical inspection • Initial utilization or testing of the complete series • Assembly • ESD-compliant packaging...

...On our SMD assembly systems, we can produce both large series in a short time and small series with minimal effort. Thanks to state-of-the-art equipment, components as small as 01005 (0.2mm x 0.4mm) can be assembled in our electronics manufacturing.

...Circuits realized with SMD can be kept very compact. SMD Soldering SMD components (Surface Mounted Devices) are components for surface mounting. These tiny components, ranging from 01005, 0201, to QFN, QFP, and BGA, have become indispensable in PCB assembly. Circuits realized with SMD can be kept very compact. Another important advantage is the elimination of connection wires and improved...

...All placeALL® assembly systems are designed for the flexible manufacturing of SMD projects. The FRITSCH placeALL® is the standardized platform for flexible, high-precision, and cost-effective assembly of electronic components in the field of prototypes, small, and medium series. All machine types share the same software foundation for setup, customization, and production. Due to our in-depth manufacturing capabilities, custom applications can be implemented quickly.

...Price Displays with SMD LEDs Hitechled has not only come up with a modern, highly readable digit design for the new HDP series, but has also revamped the protection of the circuit boards. The electronic components are coated with a uniform layer of silicone resin. Additionally, the control board is protected by a Plexiglas cover. All price displays can be ordered with either 4 equally sized digits or a smaller final digit. Up to 8 products can be displayed per side of the price pole. Digit Height: 10 cm LED Colors: white, red, amber, green...

...High-Performance Hybrid Rework System, 3,900 W Repair with utmost precision: Desoldering, placing, and soldering for all types of surface-mounted components (SMD): BGA, metallic BGA, CGA, BGA sockets, large components up to 70 x 70 mm edge length. QFP, PLCC, MLF, and miniature components down to 0.2 x 0.4 mm edge length. GUIDED REWORK! - Highly efficient 1,500 W hybrid top heater - Large-area...

...Polytec TC 351 is a one-component, stand-stable, heat-curing, thermally conductive epoxy adhesive or encapsulation material with a long pot life and high dielectric strength. Polytec TC 351 is excellent for electrically insulating, thermally conductive bonding and encapsulation. Polytec TC 351 can be used as an SMD adhesive for securing components before soldering, as well as a fixing adhesive for sensors.

... production • Creation of benefits • Material procurement (e.g., circuit boards, stencils, components) • Design of assembly aids and test adapters • Fully automated SMD assembly • Reflow, wave, and selective soldering • Optical inspection • Initial utilization or testing of the complete series • Assembly • ESD-compliant packaging Since PCB assembly is our core business and we have particularly in-depth knowledge in this area, we can often handle unusual requests.

...Conceptualization, development, and manufacturing of assemblies and modules. SMD - Automated assembly from 0402 to component size 40 x 40mm. THT - Assembly of printed circuit boards with axial/radial components. Vapor phase reflow soldering, lead-free or leaded according to your requirements. Component sourcing in RoHS-compliant execution and material management. From prototypes to medium series in industrial quality.

...A modern machine park enables SMD and THT assembly at the highest level. Baudisch Electronic GmbH offers EMS services (EMS = Electronic Manufacturing Services), meaning we take on the creation process of your product either fully or partially, depending on your requirements. Our range of services extends from electronics development to manufacturing, all the way to a tested and market-ready packaged product. We also provide procurement of all necessary components and comprehensive lifecycle management as part of our all-inclusive service offering.

...HPN Series Features · Thin-film technology on ceramic substrate · Standard types and custom designs · Advantages include excellent relative parameters for tolerance, temperature coefficient, and drift · Plug-in components or SMT assembly (SIL, DIL, SMD) · RoHS compliant...

...With a placement capacity of over 25,000 SMT components per hour across 4 placement machines, we cover the entire spectrum of components in SMT assembly. Depending on your product and the quantity of your SMD assembly, large batch sizes are processed on our SMT line, while medium to small batch sizes are assembled on the stand-alone machines. After SMT assembly, the components are soldered using a reflow process in nitrogen, and the process is subsequently confirmed through an AOI inspection (Automated Optical Inspection).

...Setting up a pick-and-place machine is not economical for small series and prototypes. With the manual placement device, even the smallest quantities can be produced quickly and cost-effectively. The solder paste application is done either with a dispenser or a small stencil printer. To achieve optimal placement, fine-pitch and BGA components are re-placed using the precision placement system. The placement capacity is approximately 5,000 components per day.

...Antennas Aluminum Electrolytic Capacitors Potentiometers Filters Ferrite Ceramic Capacitors Tantalum Electrolytic Capacitors - Through Hole Tantalum Electrolytic Capacitors - SMD Oscillators / Crystals Resistors...

...As an EMS provider, sh-Elektronik GmbH takes on the assembly of printed circuit boards for samples/prototypes and small series up to mass production on behalf of customers. Production takes place at our facility in Dresden in an ESD-compliant environment according to the IPC-A-610 standard and DIN EN ISO 9001:2008. Assembly of printed circuit boards with SMD components - SMD assembly of: µBGA...

...(VC) TCXO 11.4 x 9.6 x 2.0 mm 4 pads SMD (VC) TCXO 18.5 x 11.8 x 8.9 mm...

...combined with mechanical manufacturing On a built-up area of 1,000 sqm, the following services are offered: • Assembly and testing of printed circuit boards with through-hole, SMD, and mixed components (including cost-effective procurement of components) • Complete manufacturing of devices • Design and construction of assembly fixtures • Production of precision mechanical parts Particular...

... boards from the top side. Combination of diverse application tasks such as SMD placement, pre-reflow, chip control, THT fitting, conformal coating and full screening for lost components. Reads barcodes and data-matrix codes in any position and quantity even on multi-PCBs.

...We get straight to the point Just like SMD assembly, THT assembly is carried out strictly according to the IPC-A-610F standards. In conventional assembly lines, THT components are placed directly onto the circuit boards at state-of-the-art assembly tables within the solder frames. The in-line transport systems move the solder frames through the wave soldering system and back to the assembly...