grease Germany

...In our modern three-zone pre-treatment facility, we optimally prepare the materials to be coated. For an optimal coating result, the metal must be absolutely clean. Even the smallest traces of grease and dirt can prevent a homogeneous coating. Through iron phosphating, followed by rinsing with tap water and finally rinsing again with deionized water, we remove any disturbing residues. After drying, the workpiece is then perfectly prepared for the coating facility.

...Attach your with this suction cup to cars, boats, motorcycles, and more. The included short swivel arm allows for extremely compact mounting. Designed for a wide range of movements and stability. Ultra-strong hold - proven at speeds over 240 km/h. Note: For maximum holding power, the surface must be clean. Note: For maximum and reliable holding power, use only on smooth, clean, and grease-free...

... 14476 (adenoviruses and noroviruses), EN 14561 (bacteria), EN 14562 (fungi, yeasts), EN 14563 (mycobacteria and tuberculosis). Disinfecting power and good cleaning results can also be easily achieved on visibly soiled materials. Easydes effectively removes dirt and grease. If not available for immediate delivery, the delivery time is 7-9 days. Use the disinfectant spray with caution. Always read the label and product information before use.

...Through sandblasting, workpieces are prepared for powder coating. This means that the workpieces become free of grease and a certain surface roughness is achieved, which is necessary to provide a high-quality coating. We exclusively use GMA Garnet as the blasting medium. However, we also offer simple contract blasting of any workpieces without powder coating. In our sandblasting booths, we...

...Emptying / Cleaning, Maintenance and Inspection of Oil Separators and Grease Separators. Suction and Recovery of Sludge.

... abrasion resistant, dust-free • Completely liquid-tight • Specially chemically resistant properties • Solvent-free • Decontaminable Weight: 1.6 kg/ltr Color: RAL Compressive strength: approx. 90 N/mm² Flexural and tensile strength: approx. 35 N/mm² Abrasion resistance: very high Mechanical load capacity: very high Substrate: The substrate must be dry, dust-free, and grease-free Processing time: approx. 45 min at +20°C Load-bearing: after approx. 24 hours at +20°C Consumption: approx. 4-5 kg/m²...

...Our Cleantower Optisystem 5000 consists of a mobile, universally applicable flushing device for the removal of rust, lime, and other deposits. It is also suitable for preservation. Our Cleantower Optisystem consists of a mobile, universally applicable flushing device and specially formulated chemicals for the removal of rust, lime, and other deposits, as well as for the removal of oil, grease...

...Description manual single-axis milling head KF-2/90 P=15 kW, n=1,500 RPM, M=500 Nm Construction principle: - Positioning and clamping: manual - SK 50 without automatic tool clamping - with external coolant supply - Lubrication: grease lubrication - Transmission gear: 1.68 : 1 - Manufactured length (up to spindle centre): 750 mm - Concentric running of the internal cone: L=15 mm : 0.010 mm L=300 mm : 0.020 mm - Centre offset : 0.020 mm...

VISIONARIES AND TINKERERS High-performance lubricants, additives, brake fluids, cooling lubricants. Made in Germany. Germany is the land of technology. The technology of vehicles. The first automobiles were invented in Germany. Visionaries and tinkerers had ideas and were passionate about their dream of bringing self-driving cars to the streets. What became of this dream?! It became reality. AS P...

...droplet separators, oil and emulsion mist separation, up to grease trap filters, as well as impact plates / flame protection filters in large kitchen technology. Our portfolio also includes the production of complex system components, as well as complete assemblies.

SKF and Lincoln have joined forces to offer the most comprehensive portfolio of lubrication solutions worldwide – from manual grease guns to automatic central lubrication systems. Together, we cover the complete range of lubrication tools and services, from the planning of turnkey lubrication systems, through installation, to testing and training. With over 200 years of combined experience in lubrication management, we help you improve machine reliability, reduce maintenance costs, increase productivity, enhance safety, and optimize personnel deployment.

... both the exhaust system and the environment with grease deposits, odor emissions, and smoke. To address this, Plasma-Clean offers a selection of effective and well-thought-out cleaning systems based on plasma technology. These modular cleaning systems also incorporate the latest advancements in Ultra Violet (UV) and Ozone (O3) technology—known as Advanced Oxidation systems—as well as traditional...

... grease guns, glue guns, dosing pumps, 2K mixing and dosing systems, valves, UV lamps, mixers, liquid containers, and complete dosing robots. In recent years, alongside MAKA - dosing technology, the area of "Technical Trade" has also developed. Here, MAKA supplies renowned manufacturers from the machinery and industrial sectors with seals, rolling bearings, plastics, drive chains and belts, adhesives, pneumatic and hydraulic components. Please direct your inquiries to: Dominik Hartmann Tel: +49 721/66 38 690 Mobile: +49 151/64 963 226 Email: d.hartmann@makados.de web: www.makados.de...

... in exporting to all continents except Antarctica. - Well-stocked warehouse with substantial inventory, resulting in short delivery times, often shipping within 24 hours. - High-quality grease nipples from ISO 9000:2001 certified manufacturers. - Products from German manufacturing at competitive prices. - Unique, high-quality packaging in plastic boxes with transparent lids for small order...

...function perfectly for the customer. Our overall workflow is process-optimized and conserves our resources. This enables us to achieve short lead times and timely deliveries. What makes us strong: Customer-specific solutions High manufacturing depth Short lead times On-time delivery Our comprehensive product range includes cover grids, ceiling air outlets, grease filters, filter...

...LARCO SCHMIERTECHNIK (formerly Wilhelm Lahr) has been active in the field of "Lubrication Devices and Lubricants" since 1917. The extensive range includes everything from simple grease nipples to various grease and oil pumps, oil sight glasses, and central lubrication systems. Greases and oils are part of the program, as well as oil level fittings in numerous versions. - certified according to...

... the mentioned trades, we possess additional competencies and experience in: • Hygiene inspections and hygiene renovations of HVAC systems according to VDI 6022 • Cleaning and removal of grease deposits and other residues from exhaust ducts (kitchens, paint shops) • Cleaning and filter changes in painting systems • Maintenance, testing, and assessments of fire dampers and fire sections (insurance...

Since its founding in 1999, STU has been equipping industrial and commercial customers with high-quality equipment in the areas of refueling technology, fresh oil and grease supply, as well as used oil disposal. Our high quality standards are reflected, among other things, in the product range of AdBlue® pumps, accessories, and tank systems. Whether small filling station or large consumer - you are in the right place with us!

... tempering of metals, as well as foaming, discoloration, and melting of plastics. Weather-resistant label films and nameplates, glass, ceramics, silicon, and inorganic materials can also be processed. Additionally, functional layers can be created, activated, or removed, and heavily (grease and oil) soiled surfaces can be cleaned and structured as well. In addition to pure laser marking, Laseric...

... specialty lubricants, even extreme requirements are met. In doing so, we support users with expert knowledge and extensive service. If suitable lubricants are not found, we develop tailored solutions. Our lubricants consist of fluids such as polyalphaolefin, PAO, polyglycol, polyester, PG, esters, perfluoralkylether, PFPE, in lubricating oil, grease, pastes, suspensions. In the types of bedway oil...

In 1988, TBA GmbH began as one of the pioneers in the development and trade of microbiological products, which were used, for example, for the remediation of soils and ponds. At the same time, the company started facilitating disposal orders for grease separator contents and other waste. In 1999, the company was taken over by the new managing partner Frank Bargmann, among others, who...

... high temperatures guarantee complete hygiene and the elimination of germs, fungi, and bacteria when used correctly. The dry steam produced by the STEAM DRAGON contains only a minimal percentage of moisture to remove grease, dirt, and deposits in general. This type of cleaning does not create dust, and cleaning agents become unnecessary. Our customers, both in the private and commercial sectors...

... rods, thread pieces, pin screws, flange nuts, threaded pipes, raw materials for thread manufacturing, connection couplings, special screws, spindle grease, taps, thread gauges, press nuts, semi-finished products, valve spindles, injection molded nuts, catching nuts, pre-tensioned nuts, spindle linear units, planetary roller thread drives, ball screw drives, linear guides, sliding bearings, and drawing parts with threads. Additionally, we can perform thread rolling, thread grinding, and thread whirling on a contract basis.

On modern slitting lines, we cut strips from brass, copper, tin bronze, and aluminum. Processing of painted materials is also possible. Upon request, we can cut your material free of grease or with narrowed band saw and width tolerances well below DIN standards. Best quality and reliability. Certified according to ISO 9001. Our extensive Wieland stock, a high-quality machine park, and an...

Dispensing and Mixing Technology for Small Quantities of Liquids and Pastes from approx. 0.0001ml Dispensing Technology: Dispensing devices and valves, among others, for the dispensing of solder paste, grease, oil, cyanoacrylate, silicones, etc. In addition, we offer a complete range of accessories such as dispensing needles, cartridges, adapters, hoses, etc. We provide a wide product range from...

... cylinders, heavy-duty cylinders, equal stroke cylinders, block cylinders, hydraulic accessories, linear flow dividers, hydraulic cylinders according to DIN, special hydraulic cylinders, hydraulic grease pumps, spring elements, project planning of complete hydraulic controls, control systems, and hydrostatic drives.

... system. Our sectional system can be easily implemented in large installations, even when individual sections are far apart (up to 300 meters is easily possible). The sectional system can operate with pressures of up to 300 bar in the main lines – however, the normal operating pressure is significantly lower. The sectional booster pumps are used to compensate for pressure loss in the main lines and to ensure a homogeneous grease flow in the individual sections.

... well as agricultural machines. In comparison to previous clutch release bearings, the KAS-CLUTCH Releaser with the innovative solution can be used in extreme applications, such as mining and site vehicles. Advantages: - Longer service life through the use of an innovative contact seal concept as well as a high-performance grease. - Maintenance-free. - Suitable for drawn and pressed clutch...

... spoiled food, bone and meat waste, cooking fats, grease separators, glass waste, paper, cardboard, and residual waste. Many of our references include restaurants, hotels, schools, grocery stores, catering services, food manufacturers, canteens, hospitals, and large kitchens. We provide our customers with a hygienically impeccable exchange container system. This means our containers are fully loaded...

Specialized consulting for oil separators, light liquid separators, coalescence separators, and grease separators, including associated maintenance, inspections, general overhauls, leak tests according to DIN 1999-100, DIN 4040-100, and DIN 1610, sales, spare parts, repairs, renovations, expert assessments and professional competency tests, competency training, briefings, and commissioning, dewatering concepts, needs analyses, condition assessments.