system cables Germany

...The test setup presented here is a compact system for testing cables, wires, cable modules, cable harnesses, connection modules (and similar low-resistance test specimens).

... a mounting frame or suspension cables. Advantages: - Suitable for direct and indirect irradiation - No odor disturbances - Low maintenance operation - Low operating costs For comprehensive and targeted advice, please contact us: Email: uv-technology@purion.de Phone: +49 3682 479087 Radiation width: 380 mm Disinfection 80%: approx. 70 m³ Disinfection 88%: approx. 35 m³ Weight: 2.0 kg Lamp lifespan: 10,000 h Housing (L x W x H in mm): 700 x 67 x 100 Number of lamps: 1 Housing protection class: IP 54 Electrical connection: 110-240 50/60 Hz Power: 48 W Fuse: 10 A...

...Connector system meets all requirements for simple, safe, and fast installation. Poles: 3-, 4-, 5-, and 6-pole Available system components: Connectors, device connections, distributors, intermediate couplings, pre-assembled cables Rated current: 20 A Rated voltage: 50 V/250 V or 250 V/400 V (depending on coding and number of poles) Locking: Self-locking, tool-free Product standards: IEC61535...

...The detailed documentation of all orders is an essential part of our quality management system.

...High Current Contact System for the Anodizing, Electroplating, and PCB Technology Industries Execution Type Performance Range High Current Contact Systems from 250-12,000 A Quick-Release Contact Heads 1,000 + 2,000 A Plastic Support Blocks 250-12,000 A Your Advantages: - Long lifespan due to cast design - No control elements - Contact pressure is proportional to the load weight - No heat generation -> very low power loss - Suitable for fully automated systems A DEVELOPMENT FROM PRACTICE FOR PRACTICE, TRIED AND TESTED FOR DECADES!!

...The standard system for the automotive industry Multiple oven tests can be conducted consecutively Indication of positive/negative process trends at oven exit Up to 16 measurement points in a single run Real-time analysis of temperatures in batch ovens via connection cables Fully customizable and user-friendly Insight analysis software Wide range of heat protection containers (silicone-free) and...

... positioning. Material:C45N (optionally aluminium) Operating temperature:-10 °C to +80 °C Mounting position:Any Lubricant:With bearing grease via grease nipple Options:Absolute measuring system, axial cable outlet, control units incl. cables, water-cooling...

...Stranded tinned copper wire with double cross-linked insulation. Insulation: Polyalkene/Polyvinylidene fluoride. The aforementioned elements are components for the production of system cables. Special cables can be manufactured according to customer specifications.

...High-precision manufactured silver-plated copper round wire as the inner conductor for coaxial cables. Dimension range from Ø 0.10 mm to Ø 1.8 mm, produced on a specially developed system. HF wire has a special diameter consistency, excellent concentricity, and an extremely clean surface.

... Integrated Network Monitoring Functions with Notifications Keep an eye on the condition of your system or network segment – continuously and traceably at any time. Integrated Diagnostic Functions Locate sources of interference – without additional measuring devices or time loss due to manual measurement efforts. Performance-oriented Industrial Switch Technology Ready for future-oriented requirements regarding the increasing data volume in ever more complex machine and hall networks. Integrated Web Interface Also usable without additional software.

... dissipation performance, and high magnetic field efficiency Applications: Wind power, rail transit, new energy vehicles, power transmission and transformation equipment, home appliances Production capacity: 82,000 tons Management system: Strictly implemented Manufacturing Execution System (MES) and VDA6.3 German Automotive Industry Quality Standards ...

... cables securely and neatly together. This allows the cables to be quickly attached and also removed without leaving any residue. Thus, drilling into existing steel beams is eliminated – and order is finally restored to the cable mess. Magnetic cable holders are also suitable for applications where conventional holders are simply not possible – a win-win situation!

... technology. Its high-end tandem lens systems ensure efficient and lossless capture of the output from 25 mm image intensifiers - free from artifacts. Camera Link HS guarantees you uncompressed and robust data transmission of up to 3.4 GBytes/s. The latest standard of high-performance data interfaces for scientific cameras enables long-distance transmission over fiber optic cables. Forward Error Correction algorithms ensure maximum data integrity. Full resolution: 2048 x 2048 pixels Frame rate: 416 fps Exposure time: 4 ns...

...Exhaust Hose CP ARAMID 461 PROTECT Inner Ø 100 mm Length 7.5 m 0.880 kg/m NORRES Exhaust hose, vibration-resistant, outer protective profile Applications: · flexible hose for hot gases · exhaust extraction, extraction of engine exhaust gases: exhaust hose reel, suction slot channel, above-ground extraction system, below-ground extraction system · engine test bench, exhaust measurement Properties...

... EURORAIL, you get an extremely flexible lighting system that you can quickly adjust and modify according to your lighting needs. Optionally available with a motion sensor (turns off after 180 seconds without detectable movement). Featuring the GST15 plug system. Made in EUROPE. The EURORAIL light strip has the D mark for fire-hazardous areas.

... ✓ Continuous torque of up to 18.1 Nm ✓ Extremely compact design available in two heights (17 mm or 25 mm) ✓ Torque motor as direct drive ✓ Integrated incremental encoder (optional sinusoidal/cosine, absolute) available as a ready-to-connect complete system including servo amplifier with suitable fieldbus interface Maximum voltage: 420 VAC / 600 VDC Options: Various bearings, holding brake, diverse cable exits and lengths...

...Your Advantages of Cables over Pipes - simpler, cost-effective installation - lower line losses - retrofittable into existing heating systems with standardized 1 1/2 inch AG - no additional heat exchanger required - no temperature stress on components - no additional auxiliary power needed - returns thanks to immediate utilization of diffuse radiation - even during transitional periods - easy system monitoring - max. allowable water temperature: 95 °C...

...Copper Heat Sink Application: Voltage Converter for Submarine Cables...

... for later exporting to a USB stick is integrated as standard. The GPS position is recorded for integration into Google EarthTM. RD1100 - portable Ground Penetrating Radar System, consisting of: Chassis with wheels, radar unit, rechargeable batteries, connection cable to connect the battery to the radar unit, and the user manual. The device would be very elaborate in the demonstration and costs 600 euros, which will be credited back upon purchase.

... machine vision applications. The completely redesigned structure has significantly reduced the mechanical build. Dimensions and weight have been reduced by approximately 25% compared to previous models—while maintaining the same light field sizes—and the protection class has been increased to IP64. Thanks to flexible cable exits on the back of the lights, the connection cables can be positioned freely...

...Windows 7, 64Bit, Windows 8, 32Bit, Windows 8, 64Bit, Windows 8.1, 32Bit, Windows 8.1, 64Bit, Windows 10, 32Bit, Windows 10, 64Bit","Power Consumption":"Max. 2.4A: 3.3V, PCIe Max. 5.6A: 12V, PCIe","4-port GigE, PoE, PCIe, Intel® 82574L":"","Interface":"4x GigE Jumbo Frames (9KB) and Timing (IEEE 1588) CAT-5e or CAT-6 cables; max. 100m PoE, IEEE 802.3af, 15.4W","Country of Origin":"Taiwan (TW)"}...

...the cables are plugged in, and the frame is ready. Another important feature is the elegant design: the control and all cable management are concealed within the crossbeam, which LINAK offers in a fixed width of 1.20 meters and an adjustable version up to a width of 1.80 meters. Features: Collision protection, Plug & Play...

... transformers are available upon request with UL construction approval. Connection and mounting options are designed according to customer specifications. In encapsulated form, for example, screw or push terminals, pre-assembled cables, or our in-house NV plug system are available. In open form, we offer solder lugs, plug tabs, free ends, etc., for up to 200 VA, and additionally terminal strips or screw terminals for the power range of 50 VA to 2000 VA.

... from FIPSYSTEMS. The FIPMETAL® metal conduits made of galvanized steel and featuring a special clamping system are characterized by their high flexibility and good mechanical protection, making them suitable for many industrial applications.

... guide cables and wires correctly. Whether it's custom duct parts and coatings, automotive versions, lids with hinges, including grounding bolts, partitions, or other requests, we realize them quickly, reliably, and flexibly.

... contact and activates it. The repulsion between the similarly charged permanent magnets supports the buoyancy (version VK..deviating). As soon as the level drops again, the float follows and reactivates the reed contact. The level switches of the VK series are made of plastic and are available with various float variants and PVC jacketed cables. Switching function: Contact opens at falling level Nominal pressure: PN 10 Temperature ranges: Medium Max. 100 °C Ambient -25...70 °C...

... request, providing an attractive view of the entire range of cables sold by the meter. The flexibility in width and height allows for placement even within a row of shelves. These parameters can be precisely adjusted to match the storage capacity. For example, with a device height of 4,400 mm, any combination between 44 drums (only Ø 500 mm) and 170 drums (only Ø 270 mm) is possible. Advantages: - Adaptable grid design - Flexibility in width and height - Placement possible even within a row of shelves - Optional:...

... system components. Additionally, laying and connecting cables on the previously installed cable routes, testing and documenting the installed devices, cables, and routes according to DGUV3 are essential tasks that our highly qualified assembly experts carry out daily. Our assemblers are specialists in their field, combining all trades with passion, responsibility, and enthusiasm. Whether it's energy, data, or people, it won't work without the right connections. And thus, what belongs together comes together.

... specifications, preparing the necessary manufacturing and documentation materials for you. Based on standardized programs, we take on hardware design and PLC programming. This includes, among other things, the design of circuit diagrams/cables and the provision of a user-friendly process visualization system. Our switchgear and control systems, including switch cabinets, control panels, and control boxes, are manufactured in Germany, with assembly and commissioning taking place worldwide. Flexibility and high reliability are a matter of course for us. After the installation of the systems...

... damage to tool cables: damaged threads. Cleco Neotek angle screwdrivers are available in the range of 1.3 - 350 Nm, pistol screwdrivers from 0.9 - 123 Nm, and straight screwdrivers from 0.9 - 850 Nm. - lightweight, ergonomic design - fully programmable application functions - bright LED light rings - acoustic alarm signals - vibration option on the handle - connector with twist-lock on the tool cable - dual analog and digital control - significantly smaller cable diameter with 50% weight savings...