steel- carbon Germany

...Chemically resistant linings made of carbon bricks (Cecolit) and graphite molded bricks according to customer specifications.

...This material group comprises C-steel with low carbon content, good formability and fineblanking quality. Due to case hardening, the components have low-wear surface layers with high hardness and sufficient toughness in the core. They thus combine numerous properties and application possibilities in a wide variety of industries. To increase the wear resistance, you can also carburize or carbonitrate partial areas. C 10 E, C 15 E /➔ according to DIN EN 10132 - 2 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

...Non-Oriented Electrical Steel Sheets (NOES) are specialized steel grades known for their uniform magnetic properties in all directions. They are used in electrical machines such as motors, generators and transformers. These sheets offer high magnetic permeability, low hysteresis losses and good processability. Available sizes: Thicknesses: 0.35mm, 0.50mm, 0.65mm Widths: Variable, depending on specific requirements NOES are ideal for applications requiring efficient and isotropic magnetizability.

...The sliding gate manual valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently. Size:DN15 - DN150 Pressure:PN 10/40 Material:Stainless steel 1.4581 / 1.4408 Carbon steel 1.0619 Media temperature:-60 °C up to 230 °C...

...The LIPP® Large Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal...

...ballbearings (can be relubricated) robust and less influence of dirty media self supportingno additional support necessary housing stainless steel rotor stainless steel PRESSURE MAXIMUM water 40 bar DN 50 (2") 50 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") TEMPERATURE MAXIMUM 130 °C water SPEED MAXIMUM 750 1/min DN 50 (2") 2500 1/min DN 32 (1 1...

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

...Plastipur CFP 125 is an acrylic resin for the production of acrylic carbon fiber sheets.

...hot rolling mills, rod/wire mills Heat treating & annealing Induction heating Lightbulb and halogen lamp production Glass melting Semiconductor furnaces Cement & lime kilns Refuse burning Carbon graphite production Foundry & welding Rubber & thick plastic Measured temperature range:250 – 3200 °C Ambient temperatures:Up to 65 °C; up to 315 °C (600 °F) with ThermoJacket enclosure Optical...

... distributed across the entire drying product. The volatile components evaporate immediately upon contact with the hot particles, meaning new solids are generated. CFT dryers enable the drying of products that cannot be processed in other contact dryers. Highly viscous, pasty, sticky, and crust-forming states are avoided. Material: Stainless steel, Carbon steel...

...electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs. Pneumatic safety clamping system :No need for post weld grinding and polishing welded sheet metal plates with a 90° joint:max. welding length: 300 mm or 500 mm ...

...We manufacture bundle heat exchangers for use in our own facilities as well as in external facilities. In addition to heat exchangers with metallic tubes, we also produce heat exchangers with carbon tubes for highly corrosive liquids and gases. These are individually installed with sealing rings in rubber-coated steel tube plates, allowing each tube to expand freely. This eliminates the need for sealing the lower tube plates with a packing gland, which would have to accommodate the expansion of the entire tube bundle.

...Different matrix systems depending on the requirements (e.g., polyester, epoxy, silicone resins) Different fiber materials (e.g., glass, aramid, basalt, carbon fibers) and semi-finished products (fabrics, mats, nonwovens, unidirectional and multiaxial fabrics)...

...Unique Manufacturing of Custom Products Steel is a material that primarily consists of iron with a low carbon content. Steel can be shaped either hot or cold, meaning it can be forged, bent, rolled, and drawn. The special appearance is a real eye-catcher for my products.

... systems from FIPSYSTEMS. The FIPMETAL® metal conduits made of galvanized steel and with special clamping are characterized by their high flexibility and good mechanical protection and can therefore be installed in many industrial applications.

... specifications, in order to best meet their requirements (including breaking strength, elongation, flexing properties, corrosion resistance, DC resistance, low twist and low tension design, workability). Our manufacturing processes are permanently monitored and secured using appropriate procedures. As standard, we use both galvanised and stainless steel wire in accordance with DIN EN 10 264 with nominal strength of over 3000 Mpa with adequate ductility. We also use the non-corroding materials 1.4301 (AISI 304), 1.4310 (AISI 301) and 1.4401 (AISI 316) as standard.

...Special Feature: Regenerable depending on the filling Cartridge Housing: galvanized steel, stainless steel, or plastic Activated carbon filling for specific applications (e.g., ammonia, tobacco smoke, formaldehyde...) Upon request, we are happy to take care of the regeneration of the cartridges, including the disposal of used carbon. Delivery form: briquette carbon, powdered carbon, and granulate...

...We produce our DLC coating using the PACVD process. The term DLC ("Diamond-Like Carbon") refers to a group of amorphous, carbon-based coatings that are categorized into a total of 7 subcategories. Other names for DLC include i-carbon (also i-C) or amorphous carbon. The DLC coating we currently offer belongs to the group of hydrogenated amorphous carbon coatings (nomenclature name: a-C:H). These...

... also introduced for diffusion in this variant of the process. The thick compound layer generated at the surface during nitrocarburizing predominantly contains ε-carbonitrides Fe2-3CN, whose formation is favored by the increased carbon content in the furnace atmosphere. Unalloyed and low-alloy steels with low carbon content are ideally suited for treatment.

... - Forged from carbon steel in a die - Sandblasted surface - Includes spring - Fits perfectly in the hand - Non-slip handles All sheet metal shears in the "eXtrem" series are also available in various sets at unbeatable prices.

... comparatively easy and inexpensive to produce, especially when compared to other materials such as spheroidal or steel castings. Typically, cast iron with lamellar graphite is used in machine beds, gearbox or compressor housings, brake discs, or guide bushes.

... as aluminum, stainless steel, high-alloy steels, plastics, and carbon steel. We produce individual parts, small and medium series products, as well as complete assemblies including their assembly. Another core competency is the hard machining of turned and milled parts. Through our long-standing collaboration with our renowned external partners, we can also offer you a variety of surface treatments for your products.

...This robust crimping tool series made of 3mm thick carbon steel has everything needed for tough daily use. Durability and long lifespan, forced lock with emergency release, adjustable via eccentric, ergonomic handles with a comfortable grip width, performance-optimized lever translation, and precise crimp dies for processing quality and safety. The following crimping inserts are available: AH16...

...All the necessary ingredients to create your very own, highly personalized knife in Nordic style: Hardened, pre-ground blade made from Uddeholm carbon steel No. 1770 Maser birch, reindeer horn disc, brass head plate, leather, thread, short instruction manual. Blade length 95 mm Blade thickness 2.5 mm Total length 205 mm...

...Welding Wire MT-308LSi 1.4316 MTC BS300 15kg Spool Welding rod/wire electrode made of chromium-nickel steel with a particularly low carbon content for TIG or MIG/MAG welding of stainless and cryogenic austenitic steels for operating temperatures up to +400°C; ductile down to -196°C. Approval: TÜV, DB + CE...

... stone (Corian) Hybrid construction of all materials in combination, as well as with stainless steel, steel, and aluminum. Our competencies in this area are governed by high customer-specific requirements and international standards. We support our customers comprehensively with preparation of the necessary documentation according to their individual requirements in the following areas: FEM verifications Weld documentation and inspection Gluing documentation Risk assessment Project documentation. Out portfolio encompasses: Partition walls...

... dyed red, or covered with thick leather • Oak veneer in its natural state or stained Wenge with open-pore finish • Thick leather in cream or mocha with saddle stitch technique • Legs made of polished aluminum, optionally laminated with thick leather or carbon • Bodies coated in silver-gray or matte black • Accessories made of stainless steel / chrome-plated steel / polished aluminum or carbon • To complete the look: bookshelves, conference tables, sideboards, office accessories, sofa, chairs...

...Vacuum thermos made of double-walled 18/8 stainless steel, with a black plastic lid; H: ~150 mm; Ø ~71 mm; ~0.33 ℓ...

...• Pressed pure graphite rings, continuous or split • Pure graphite rings with stainless steel caps, closure cover seals • Pure graphite rings with foil insert • Graphite quality: 98% or 99.95% • Density of graphite: 1.2 to 1.8 g/cm3 • Carbon rings • Shapes: with inner bevel, round, V-split 45° or 90°...

...Strips can be custom cut to the width you need. For carbon steels and brass, the desired width is available up to 300 mm. Stainless steel strips are generally available up to 300 mm, and in material 1.4310, new production can also provide widths up to 600 mm with a thickness of up to 1.00 mm. Deburred or rounded edges are available for an additional charge. The minimum length is 50 meters, and for thicknesses over 0.80 mm, shorter lengths are also available.