nickel-copper alloys Germany

...We supply graphite molds for non-ferrous metals and precious metals. Non-Ferrous Metals For the production of bronze, brass, nickel silver, and other copper alloys, we produce: - Strip molds - Bolt molds - Wire molds Precious Metals For the continuous casting of precious metals (e.g., jewelry gold, dental gold, silver), we supply: - Graphite molds for - Strip - Wire - Tube - Crucibles - Lids...

...High flexible and compact copper conductors for carbon brushes and connectors - Compact braided round copper flexibles made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, in hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.047 mm² to 25 mm² (bigger cross-sections upon...

... are paramount. Typical areas of application include the automotive industry, mechanical engineering, and electronics, where a uniform layer is applied to materials such as stainless steel, copper, bronze, and aluminum alloys to ensure protection in aggressive environments. Chemically Nickel for optical functional surfaces is specifically designed for applications that require high optical...

...Zinc-containing bronze alloys, such as red brass, are made from the metals copper and zinc, and may also contain tin, lead, and nickel. The color spectrum ranges from gold-red (high copper content) to a light yellow (high zinc content). The common alloys have a maximum zinc content of 45 percent and are considered particularly resistant to cavitation and wear. Their excellent emergency running and sliding properties also make red brass frequently used in hydraulic systems – for example, in sliding bearings, shells, bushings, or gears.

...We supply drawn wires starting from 0.10mm in all common • materials, such as stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. • special materials such as tungsten, titanium, molybdenum, tantalum, etc. as well • heating conductor alloys and • EDM wires...

...Salt spray test NSS for metals and their alloys. Salt spray test CASS for decorative coatings made of copper-nickel-chromium or nickel-chromium and anodic coatings on aluminum.

...Corrosion protection and wear protection for almost all metal alloys: steel, stainless steel, gray cast iron, brass, copper, aluminum. Through chemical nickel plating, contour-accurate layers can be produced on precision parts that protect our customers' components from corrosion and wear. In this process, a nickel-phosphorus layer is deposited in a non-electrolytic manner and uniformly. The...

... | 1.2 | 1.6 mm (selectable depending on configuration) Materials:Steel, nickel, titanium, copper and cobalt alloys as solid wire (typical) and much more Stickout (free wire length):0.4 | 0.6 mm wire diameter ≙ 5 to 10 mm; 0.8 | 1.0 | 1.2 | 1.6 mm wire diameter ≙ 10 to 15 mm Laser types:Fibre-coupled solid-state lasers (diode lasers, fibre lasers and disk lasers) Laser mode:Continuous wave CW...

...CNC milling and turning with the highest precision. Dedicated contacts who take care of your concerns at every stage of production. A state-of-the-art machine park for the complete processing of individual workpieces or assemblies. Materials: Monocrystalline materials, titanium and aluminum alloys, nickel-based alloys such as Inconel (e.g., Inconel 718), Waspaloy, Hastelloy, rust- and acid...

...6-Piece HSS Countersink Set 90° 3-Flute, Straight Fluted, Right-Hand Cutting, Three-Flat Cylindrical Shank DIN 335C Uncoated G106: 6.3 - 8.3 - 10.4 - 12.4 - 16.5 - 20.5 6-Piece HSS Countersink Set 90° 3-Flute, Straight Fluted, Right-Hand Cutting, Three-Flat Cylindrical Shank DIN 335C Uncoated for Steel <1200N/mm², Titanium and Nickel Alloys <1200N/mm², Copper and Brass Alloys G106: 6.3 - 8.3 - 10.4 - 12.4 - 16.5 - 20.5 Coating Variant: Uncoated Order Code: G2364 Shank Design: Polygon Shank Countersink Angle: 90°...

... goods are possible. We can offer you the following surface coatings: • Zinc blue chromating (Cr-VI-free) • Thick layer passivation (Cr-VI-free) • Yellow chromating, sealing) • Zinc-nickel (transparent thick layer black passivation; various sealings) • Copper • Nickel • Tin (matte and shiny) • Silver • Hard silver • Tampon galvanizing • Hydrogen embrittlement relief (tempering) • Vibratory...

... sphericity, narrow particle size distribution, low oxygen content, and good flowability. Currently, metal powder materials for 3D printing mainly focus on iron, titanium, cobalt, copper, nickel, and other metals and their alloys.

...We meet your needs and assist you in solving specific challenges. We manufacture using all modern methods and leave no wishes unfulfilled. Flat Gaskets Whatever your requirements for flat gaskets may be, whether pure graphite, PTFE, TFM, asbestos substitutes, rubber/elastomers/rubber-steel (GST), metals, copper, stainless steels, nickel and high-performance alloys, graphite, as well as absolute...

...we can also source special tubes for you. Aluminum (AlCuMg1) Aluminum (AlCuMg3) Aluminum (AlMgSi0.5) Aluminum (AlMg5) Aluminum (Al99.5) Stainless Steel: e.g. 1.4301 Copper & Copper Alloys: Copper (ETP) Copper (DHP) Brass (CuZn37) Brass (CuZn38Pb1.5 = CuZn38Pb2) Bronze (CuSn8) Nickel Silver (CuNi18Zn20) Nickel Silver (CuNi12Zn24) Nickel Alloys: Monel (NiCu30Fe1) Alloy 400 Wire: Copper wire Brass wire...

... parts made from steel, iron, aluminum, magnesium, copper, zinc, tin, nickel, and cobalt alloys, manufacture your prototypes, and also manage your projects all the way to series production. Furthermore, we are capable of printing foundry and deep-drawing models from sand and processing them further to enable small series production. Other applications for printed sand molds are also possible. Please contact us if you have any questions about this.

... our production, round wires of all common metals, metal alloys, and composite materials are used in both bare and surface-treated versions. On our machines, we process wires made of copper, silver, brass, bronze, nickel silver, steel, stainless steel, FeNi and FeNiCo alloys, as well as Dumet and copper-clad wires or materials specifically requested by our customers. The common diameter range is...

... following galvanically and chemically produced decorative and technical surface coatings are an integral part of our program: - Copper plating, nickel plating, tin plating, and zinc plating of rack and drum goods - Gold plating of drum goods, rack goods, and printed circuits - Silver plating of drum goods, rack goods, and printed circuits - Nickel plating, tin plating, and silver plating of aluminum...

The company Aluminium - Service GmbH is a well-stocked manufacturer of non-ferrous metals, whose product range is continuously expanding. This includes all common profiles and dimensions made from the metals: aluminum, copper, brass, bronze, and nickel silver. Plastics have also found their way into the product range. In addition to the usual forms such as profile bars, round bars, pipes, wires...

Welcome to KAMET Metallhandelsgesellschaft! We are a supplier of all semi-finished products (bars, tubes, sheets) in aluminum, copper, brass, zinc, nickel silver, red brass, bronze, and stainless steel. KAMET has excellent factory connections both domestically and internationally, allowing us to present attractive offers. We supply customers throughout the Federal Republic, neighboring countries, and overseas.

... machine builders, and with suppliers of peripheral devices and controls. Our main area of activity is the production of custom punching and bending parts made from strips and wires. Each product requires specific raw materials. For this, we source slit strips and wires made from stainless and spring steels, copper, brass, bronze, nickel silver, beryllium, and other alloys. We process dimensions...