gas cooling Germany

...What to expect with an APROVIS process gas heat exchanger: - Suitable for low and high temperature ranges - Operating pressures up to 160 bar - Compact designs for tight spaces - Applicable for a variety of gases - Implementation of customized solutions...

...-resistant up to 85°C without additional cooling. Of course, there is optional cooling and protective equipment available that ensures accurate temperature measurements even in harsh environments. Temperature range: 200 °C ... 1650 °C Spectral range: 4.64 µm Optical resolution (90% energy): 45:1 Response time (90% signal): 10 ms Weight: 1020 g Power supply: 8-36 V DC...

...Gas-cooled weld head for applications with extreme narrow space requirements as e.g. in the semiconductor industry. Specially designed to weld micro-fittings. Unique construction, including specifically directed gas routing to improve gas coverage and material selection resulting in a high duty cycle even without water cooling. — Extreme narrow / compact design — Simple design allows easy to...

...Bosch Components - Water Feed Cooling Module FWM - — Savings of up to 1.8% in fuel due to better utilization of exhaust gas heat — Easily implemented in existing systems thanks to its simple connection and compact size — Customized control for safe operation of the boiler and components — Quick payback even in installations with few operating hours — Ready to operate with minimal connections — Simple startup, operation, and maintenance...

...Explosion-proof fine grinding systems for organic materials. Product fineness of D90 < 15 µm and finer. Circulation operation with inert gas and cooling. Capacities from 100 - 750 kg/h.

...For many years, our workshops have been manufacturing gas coolers in the form of star tube coolers. The star tube coolers are equipped in the cooling water area either with homogeneous internal lead lining or with a corrosion-resistant internal coating. The star tubes needed for production, featuring a star-shaped internal profile, are produced at JL Goslar on the extruder press. The...

...Explosionproof/flameproof gas preheater EEx d -ATEX und IECEx zertifiziert In general a cooling down takes place at expansion of gases whilst a heating takes place at compression. Typical gases are carbon monoxide, natural gas and air. The temperature change, which occurs at expansion of gas or gas mixture from a high to low pressure i.e. after a gas pressure control is called Joule-Thomson...

...Transfer Line Exchangers (tunnelflow and linear quench coolers) from BORSIG are used in plants producing ethylene, an important starting material for plastics manufacturing. In these ethylene plants our transfer line exchangers are rapidly cooling down the so-called cracked gas in order to obtain the optimum yield of ethylene. BORSIG Transfer Line Exchangers are the result of more than 50...

...Zenner hot gas fans transport media at temperatures up to 800°C. In doing so, we use heat-resistant stainless steel, high-temperature greases, and mechanical cooling components to ensure safe operation. An optional thermal insulation can be installed, which covers hot housing surfaces or prevents heat loss. Additionally, we are capable of implementing active supplementary cooling that operates independently of the fan. When the fan is turned off, this system continues to run, thereby protecting particularly vulnerable components such as rolling bearings. Manufactured in: Germany...

...The evaporator from N-thalpie GmbH is an important component in cooling systems, where the liquid refrigerant evaporates and is converted into gas. This device cools the surrounding environment by extracting heat from the liquid refrigerant. "Evaporators, particularly used in refrigerators, air conditioning units, and air cooling systems, play a crucial role in cooling indoor spaces and dissipating unwanted heat."...

...Stainless Steel Liquid Nitrogen Sample Storage Tanks Depending on the size and design (liquid phase or gas phase storage), these liquid nitrogen cryotanks are suitable for storing up to 100,000 cryovials or 1,700 pieces of 500ml bags. The container opening is arranged eccentrically. This reduces nitrogen consumption and lowers the vapor phase temperature. Due to the rotating base, the storage space is very easily accessible and can be utilized efficiently.

... the torch uses air as swirl gas.The air rotating around the plasma arc stabilizes the arc and thus enables piercing up to 20 mm. The cooling and protective effect of the swirl gas ensures higher cutting speeds and an increased lifetime of the consumables. The CutFire 100i is ideally suited for cutting thin sheets in ventilation and switch cabinet construction, in metal construction and many other craftsmen businesses, industrial and production plants. Operating mode:CNC Type:inverter type Other characteristics:for metal,high-performance...

...Graphic showing reception facility of proposed plant. Air Products Tees Valley Renewable Energy Facility TREMA secures order from Air Products to supply hot gas quenching and scrubbing systems. Trema Verfahrenstechnik GmbH, located in Kemnath, Germany is pleased to announce that it has been selected as provider for the engineering, fabrication and construction of two gas cooling and cleaning...

...cooling systems, coal mines, and other industrial and economic sectors. ZPAS has extensive experience in industrial design, ergonomics, and interior architecture, and is capable of constructing complex dispatch centers including desks and graphic walls. From solution proposals to basic and detailed designs (including all permits and approvals) to implementation. Follow #zpasgroup; new and exciting dispatch solutions will be coming soon. We invite you to collaborate.

... components, or in combination with flexible hose elements as a system. Areas of application: • Intake lines and clean air pipes • Charge air pipes in cold and hot areas • Exhaust lines and systems including integral or flexible insulation • Cooling lines • Piping for agricultural and forestry technology • Custom solutions for special vehicles • Piping for generators and gas turbines • Custom solutions in the field of vacuum technology Our strengths: • Comprehensive selection of thin-walled pipes with large diameters • Perfectly matched diameters (R<=1xD) • Connection of various individual elements to...

...Technical Specifications Electric Power 576 kW Generator Size 3.0 MW Fuel Heat Output 1957 kW Fuel Requirement 2.8 Sm³/h Thermal Power Exhaust Heat Boiler 450 kW Thermal Power Engine Cooling 285 kW Thermal Power Gas Cooling 304 kW Optional: Flue Gas Condensation 373 kW Total Heat Output HT 736 kW Total Heat Output HT+NT 1413 kW...

...Tranter manufactures heat exchangers for the following applications: - Power plants - District heating - District cooling - Thermal storage - Flue gas cleaning - Heating, ventilation, air conditioning / HVAC - Marine - Chemical - Geothermal Tranter heat exchangers have one thing in common - heat transfer through plates instead of tubes. A turbulent flow at low flow rates generates high heat...

... parts, after rough machining, complex shaped parts, aging, mold making; Defined heating curve at 600 °C – 620 °C / Holding time 4 hours with subsequent slow oven cooling down to approx. 150 °C. Also possible with protective gas nitrogen, no annealing residues on the surface. Total process duration approx. 30 hours. Heat treatment of non-ferrous metals, aluminum, die casting, profiles, milling molds, welded parts, outsourcing, solution annealing, copper, titanium, bronze, brass; According to specifications and desired properties.

...Application: Thermal management in CO2-optimized vehicle drives. Whether for exhaust gas recirculation, turbocharger cooling, after-run cooling, coolant circulation in start-stop applications, or for temperature control of batteries and power electronics in electric or hybrid vehicles: location-independent electric auxiliary water pumps ensure precise temperature control. The special challenge...

... materials up to a sintering temperature of 1300 °C. Two sample programs, which can be customized for individual customers, are already pre-set. Additional advantages of the Nabertherm Sintering Furnace LT 02/13 CR: Maximum temperature of 1300 °C Working temperature up to 1280 °C, depending on the CoCr material used Furnace chamber lined with high-quality, durable fiber material, not classified Low outer temperatures and high stability due to double-walled stainless steel structural sheet housing Gas supply system with solenoid valve and flow meter Rapid cooling via...

...Corrosion and Scaling Inhibitor for Water, Wastewater Systems, and Flue Gas Treatment HELAWAX HUM is used to eliminate and prevent lime and gypsum deposits in water and wastewater systems. HELAWAX HUM has a wide range of applications in industrial water systems, wastewater systems, and cooling circuits. Prevention of Lime Deposits: In the formation of carbonate crystals or calcium sulfate...

... absorber pistons of different lengths, etc., is carried out on special fixtures that are grouped as transport gondolas. Gas or electric heating, or a combination of both heating methods, has already been implemented. Depending on the required throughput, part geometry, and possible part supply and removal, we recommend or develop the optimal oven design.

...The leak detection spray allows for reliable and quick identification of leaks. The spray is suitable for gas, compressed air systems, as well as for climate and cooling systems. Item number: 71575 Contents: 6 x 1-liter bottles plus 2 x sprayers...

... compartment made of stainless steel frame • Removable sink panel with digital thermostat and on/off switch for cooling system • Water tap optional • Plug-and-play air-cooled cooling system with hot gas TW evaporation, high-performance circulating evaporator with thermostatic expansion valve, refrigerant lines, and TW drain led into the sink compartment • Stainless steel cover optionally with edge bead or customer-side vertical edge • Sink including standpipe valve and drain connection • Drip tray with sieve plate • Soundproofing with V100 plate with moisture protection coating...

...We offer efficient solutions for demanding and durable surfaces. Low-pressure plasma spraying allows for a significant increase in adhesion tensile strength, density, and purity of the coatings compared to atmospheric plasma spraying. Essentially, a low-pressure plasma system consists of the following components: Plasma spray gun and control cabinet (plasma gases, carrier gas, powder feed, current, voltage, cooling water, etc.), DC power supply, HF plasma ignition, powder feeder, vacuum tank with movement system for workpiece and plasma gun, filtration systems, and pump station.

... most affordable and economic access to this leading technology. Applications: Dewaxing (Debinding), vacuum-sintering, isostatic pressing Customer Benefits: • High product quality by excellent temperature homogeneity • Elaborated safety system for reliable and full-automatic operation • Short dewaxing and cooling times • Short installation and ramp-up times, all pre-tests and qualifications done at PVA site • Proven design and performance • Short delivery time due to pre-production • High cost effectiveness • High energy efficiency • Low gas consumption...

...The Webasto diesel parking heater, with its special integration into the cooling water system and a sufficiently sized, insulated engine heat exchanger, offers the option to support the hot water heating system. If gas is not available, it can also be operated with diesel. Heat control is possible through fan control and windshield defrosting, or additionally with engine preheating (thus eliminating cold starts).

...AWT for CHP Exhaust heat exchangers are used to increase the efficiency of stationary engines, such as those found in combined heat and power (CHP) plants. The energy from the cooling of the exhaust gases is utilized for heating water, water-glycol mixtures, or thermal oil. Often, multi-stage exhaust heat exchanger concepts are implemented, where the exhaust gas is cooled down to below the dew point. This allows for the efficient use of the energy in the exhaust gas, including the condensing value component.

... in process cooling. Our heat pumps are distinguished by their compact, energy-efficient design and the option to install them wall-mounted (similar to a gas boiler). In the regulation of our heat pumps, we use components that have proven themselves in the industry, ensuring that spare parts supply is secured in the future. Our range of heat pumps includes water/water heat pumps, brine/water heat pumps, and air/water heat pumps with a power range of 5 to 17 kW.

... made of elastomer (rubber and plastic) • Stainless steel corrugated pipes and hoses • Pre-insulated solar hose • CATS® - assembly system • other assembly systems Media: • Combustion gas • Technical gases • Oxygen • Drinking water You will find our products and assemblies in: • Heat exchangers • Medical applications • Respiratory protection • Renewable energy • Solar systems • Heating and cooling applications • HVAC • District heating • Automotive • Building technology • Chemical industry • Trace heating • Safety technology • Home installation (water and gas) - CATS® self-assembly system...