electronic system testing Germany

...Printed circuit boards are now tested for flawless functionality using modern flying probe test systems. Such test systems are highly complex and require very fast electronic controls as well as sensitive measurement systems. The test systems are expensive investments and are therefore often in operation around the clock in a three-shift system. The electronics must be correspondingly robust and meet the highest quality standards.

...In addition to the usual ICT/FCT processes, we can also specifically verify each individual manufacturing step depending on the requirements. Efficient testing strategies and final functional tests are an integral part of our quality management. This electrical testing method is ideal for testing smaller quantities, such as during pre-series tests, prototypes, or pilot series. The rapid test setup allows for flexible responses to product changes. Flying probe tests can be set up quickly and are cost-effective.

... you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test...

..." • Includes firmware "Energy-TP": • Recording of data on SD card or mirroring to external drive • Management of connected devices • Display of all individual instantaneous values • Display of current consumption and power • Support for an optimization system • Interface for data transmission to a higher-level control system (PLC) via TCP/IP • Updatable via USB...

...Inline Measurement – Integrated Measurement in the Manufacturing Process Custom-designed measuring probes for measuring in machines with and without feedback control of the machining machine. Available as electronic or pneumatic measuring probes. To enhance process reliability, all electronic measuring probes with internal measuring elements are equipped with a pneumatic probe internal cleaning system to prevent the ingress of dirt and moisture. The evaluation and connection to the manufacturing machines is done via 19" rack systems or SPC computers.

... Our bundle can otherwise come into use for educational purposes on colleges and universities for electronic and measurement applications training or single use assemblies for bachelor or master theses. In Addition engineers may use it for testing different set ups and preseries products or prototypes.

... services include the complete organization and production of assembly kits or finished assemblies – assembled and tested. A team of qualified professionals meets every requirement. For a decade, we have been a recognized manufacturer of system assemblies in the fields of mechanics, pneumatics, hydraulics, and electrical engineering. Our flexible approach to your requirements allows for the customization of standardized testing processes, such as functional tests on test benches. Benefit from a powerful partnership.

...NanoTest VCSEL measures VCSEL on wafer level or Chip on Carrier regarding their optical and electrical characteristics. The tester accommodates wafers with a diameter of up to 6 inches (150 mm), as an option also larger diameters can be integrated. A special interface mounted to the chuck also allows for testing Chip on Carrier devices.A high-precision motion system with XYZ and rotary adjustment...

...Complex system solutions instead of simple sheet metal parts – based on this principle, we offer our customers ready-to-install systems. We assemble sheet metal parts including electronic or electromechanical components, tested upon request with specific, defined testing procedures or methods, and equipped with the corresponding documentation. This allows us to take on the part of the value creation that is not part of our customers' core competencies. We implement all these tasks on time and with high quality – thus ensuring lean production for our customers.

...Flexible, individual – economical through proven standards. The fully automated system allows for reliable and fast testing and packaging of electronic components. Input module – for receiving the electronic components Image processing module – for position correction of the components Electrical testing of the components Optical inspection of coplanarity, pitch, lead length, etc. 3D On-the-fly...

... from the photovoltaic, plastics, textiles, coatings, automotive, and cosmetics industries to design testing methods tailored to the specific product. Atlas is a company of AMETEK Measurement & Calibration Technologies, a division within the AMETEK Electronic Instruments Group, a recognized market leader in the field of advanced monitoring, testing, calibration, and display devices. AMETEK, Inc. is...

... of CANopen Safety due to the realization of various customer projects. A holistic view of system development, close interconnection of hardware and software, solid experience in series production, and customer-oriented consulting throughout the entire value chain characterize our service. An optimized logistics and process chain from material procurement to series testing ensures high quality and adherence to deadlines. In the area of Electronic Manufacturing Service (EMS), we offer highly flexible prototype and small series production.

... - Measurement Technology We see ourselves as an EMS provider for the complete manufacturing of electronic assemblies, from development and component procurement to assembly, final assembly, functional testing, and quality assurance. Our PCB assembly with SMT and THT is geared towards small to medium production runs. The fully automated production facilities are flexible for prototypes and small series...

Advantages for the customer in collaborative development work: Our Setup We develop your new products in collaboration with competent partners. Our role is project management. Cost-effectiveness Bodenburg Engineering can mobilize as many resources as needed, like a modular system (lean structures, short paths). Reliability All tasks (development, production transition, testing, support) are...

Since 1984, MIKRO-M GmbH has been developing and producing testing devices for surge protection, initially custom test automation systems for industrial use in quality assurance, ranging from simple testing stations to complex testing and sorting systems that perform millions of tests per year. MIKRO-M positions itself as a system provider, offering necessary support throughout the entire...

... to determine conformity according to the applicable standards or device specifications. All services are performed in accordance with a quality management system based on ISO 17025. For EMC testing, CE-LAB GmbH is accredited by DAkkS (D-PL-12133-01-00) as a Technical Service for type approval procedures (e1/E1) designated by KBA (KBA-P 00079-06) as a technical service provider. DAkkS...

Additionally possible: – Function testing according to customer specifications – Layout creation by external partners Our machines and systems: – 3 Samsung placement machines – 2 vapor phase soldering systems – 2 wave soldering systems – PCB cleaning system...

... and software; temperature tests in climate chambers; creating assembly & testing instructions as well as product documentation. Our Employees Developers for electronic hardware, electromechanical design, operating system software, and testing programs; industrial electronics technicians, service technicians, quality assurance specialists, marketing and sales experts, purchasing, AV, and...

... system certified according to ISO / TS 16949: 2002. - Design and development using modern 2D and 3D CAD systems. - In-house component testing facilities to ensure durability and function. - Own material laboratory with scanning electron microscope and X-ray - spectral analysis for material examination. - In-house tool and machine construction. - Modern IT systems for fully electronic order processing (Edifact, Odette, VDA).

The name BETESO Electronics Manufacturing Services GmbH, formerly BaumTec, represents comprehensive competence and quality under one roof. From the idea through planning, manufacturing, and testing to a complete system solution. We meet your requirements and are constantly seeking innovative solutions for even more economical production of your products. • Experience: Our company has over 15...

... preparation - Manual assembly, including at assembly tables with light pointers - Processing of radial and axial components Testing: - Programming of circuits - Functional testing Additional: - Assembly work of electronic components - Cable assembly - Wiring and cabling - Packaging and shipping - Special requests upon consultation...

... precision from raw glass blocks to finished optics or micro-optics. Through various assembly processes, we create very complex multi-element optics, which are used, among other things, in laser applications. Special assembly technologies and the necessary equipment enable us to further develop complex modules and systems made up of optics, fibers, mechanics, and electronic components such as...

... for you. And we have been doing this for over 25 years! Our Mission Our goal for 2013 is to achieve our three hundredth lifetime simulation system and a revenue increase of 30%. We aim to achieve this by expanding our product range. To optimize and perfect the manufacturing process, we are relocating our headquarters. In the new year, you will find us at Gerstenweg 4 in Barbing. The location is...

...as well as cable assembly and control cabinet construction. Full traceability is a daily practice for us. The electronics produced are characterized by a high component density and are subjected to several robustness tests, including integrated system tests, during manufacturing. STOLL electronic GmbH's strengths lie primarily in its exceptional flexibility in producing individual samples on...

... materials, aerospace, machinery and metal construction, medical and measurement technology, food, paper and glass manufacturing, testing and safety technology, and much more. Products & Solutions: Plant and machine automation, customized solutions, measurement systems, presses, testing and safety systems, visualization systems, and much more. Consulting & Engineering: Electronics development...

...Headquartered in Nuremberg and with over 60 highly qualified employees, we develop and manufacture a comprehensive range of high-performance precision sensors, controllers, and switches for heating, air conditioning and ventilation, refrigeration and cleanroom technology, flow and limit control, as well as light and motion detection on a production area of 4,000 m². Certificates: DIN EN ISO 9001:2015, TÜV, EC type examination according to 97/23/EC, GOST Russia, DIN CERTCO, DIN testing according to DIN EN 14597:2005-12, CE, ESD, ROHS, EAC, GOST-R, REACH, UL-Certification...

... quality standards in the design and construction of printed circuit boards, which our customers trust. Customer loyalty speaks to the reliability of our products and confirms our work. Adherence to precisely defined control steps and testing procedures is a guarantee for the consistently high quality of our results. Our quality system is certified according to DIN ISO9001:2000. Since 1998, we have...

... software stacks. Every system from Thomas-Krenn leaves the company only after extensive, standardized testing, and our production takes place exclusively at our site in Freyung, Germany. At Thomas-Krenn, you can always reach one of our trained and highly certified support staff. Additionally, our Austrian employees are happy to share the in-house expertise in our Thomas-Krenn Wiki for knowledge transfer. Qualified, highly motivated sales representatives, along with colleagues from our Tübingen branch, ensure that your concerns are always in the best hands with us.

... requirements of the parts to be cast. An active molding material management for optimizing the molding material ensures that the used molding material (also known as old sand) is partially reprocessed and made usable for new batches by mixing in fresh molding sand. This requires that the sand is previously examined in the sand preparation using sand testing systems and then sufficiently enriched with...

... and now includes display devices, PID controllers, signal converters, PLCs, HMIs, and panel PCs. The company has decided to keep the entire production cycle in-house: from the development of hardware and software to electronic assembly with production lines, calibration systems, and highly automated testing. The product concept is based on extremely flexible hardware/software structures in...