electronic parts Germany

...Our counting and weighing machines enable the counting and weighing of various parts such as screws, nuts, washers, components (made of metal or plastic), dowels, small hardware, and confectionery. Thanks to the simple setup, you can switch from one type of part to another in just a few seconds. The frame counting cell, controlled by the PLC and equipped with a filter, counts only parts and no waste. Weighing is performed by a calibrated scale. The control console allows for very easy access to the settings and displays errors in plain text.

... ✓ Fuel gauge ✓ Approved to IEC/UL/CSA 61010-1 / -2-201 ✓ 3 years warranty The DC UPS UPSI-2406DP1 with included energy storage has been designed for DIN Rail applications. The robust housing protects electronic parts against coarse pollution. The µC-controlled DC-UPS is based on the proven UPSI-technology and features numerous protective and monitoring functions as well as an integrated reboot...

The company GETRA was founded in 1968 in Munich. From an initially small device and transformer manufacturing operation, it has developed into a powerful medium-sized enterprise. In 1970, production began at the Osterwaal/Hallertau plant. Our products are manufactured based on relevant VDE and EN regulations. With the certification according to DIN EN ISO 9001 carried out in 1996, we will continue...

... of controls and drives to hold the status of "Bosch Rexroth Service Point." Therefore, we are able to offer you a warranty of up to 24 months* on the services mentioned above regarding control parts from the manufacturer Bosch Rexroth/Indramat.

...Testing services from a specialist: we are specialized as a testing laboratory for the simulation of specific environmental conditions and the monitoring of the influences of these conditions on electronic assemblies. We offer the following services in our test lab and at your site as contract testing.

Moving more for our customers – that is the vision of Buchert + Feil. Therefore, we incorporate our knowledge and experience into each of our manufacturing areas. Comprehensive and individual support before, during, and after project completion, combined with a time- and cost-oriented project management, creates transparency and planning security. Deeply connected to the region and committed to ...

Company founded in 1991 in Zwickau as a spin-off from a well-known regional electrical company - continuation of production in the existing company premises. Based on over 50 years of experience in the development and manufacturing of reactive power controllers / compensation systems, these traditional products were adopted and continued. Expansion of this field through a larger product range.

...Precision injection molding of technical plastic parts for fine mechanics components in electronic applications • Tool designs are created based on specified item drawings • Optimization of the design using 3D CAE • Manufacturing of injection molding tools • Sampling and testing of injection molded parts • Series production • Continuous adjustment of injection molding tools to changed operating conditions of the fine mechanical components • Quality monitoring according to DIN ISO 9001:2015...

...Leading Elastomer Seals As a service center of Chomerics, the world's leading manufacturer of materials for shielding electronic devices against electromagnetic interference and thermal interface materials for the thermal connection of electronic systems, we offer you seals in a wide variety: as extrusions, stamped parts, or molded components. You will find elastomer seals for universal or custom applications in our extensive product range.

... that every toolmaker needs. Thread forming units Electronic units of the latest generation at an unbeatable price. Precision flat steel For smart calculators from mechanical engineering, fixture construction, tool making, and mold making. S-plates Unbored plates, machined on all sides. For tools, fixtures, and standard column frames. The cost-effective option.

... • Average roughness value Ra 0.1 µm or even less Materials suitable for polishing include chromium-nickel steels, such as 1.4301, 1.4306, 1.4401, 1.4404, 1.4435, 1.4436. The electropolishing capability and the polishing result depend on the shaping and pre-treatment of the parts to be processed. We are happy to advise you on the various possibilities.

...Bluing creates uniform, black surfaces on iron workpieces. Bluing is classified as a wet-chemical process. By immersing the workpieces in a boiling alkaline-oxidizing solution, a thin mixed iron oxide layer, consisting of Fe3O4 and FeO, is formed on the surface. This conversion layer gives the parts a deep black finish. Since only the surface is transformed, bluing is not considered a coating process.

...Our expertise lies in the entire coating process of conductive metal parts: Pre-treatment processes: Chromating, chrome-free. Stripping (chemical), pickling, degreasing.

...We offer our customers the highest level of service from a single source. Therefore, we have included all measurement element components, such as connection heads, protective tubes, clamp fittings, and ceramics in our portfolio. Additionally, our raw parts warehouse has all types of SMP connectors, couplings, Lemo sockets, and clamp bases available. Feel free to inquire about our extensive range of measurement element components.

...The Quintex IRE8x is an easy-to-use electronic multifunction controller with a variety of settings and applications in small to medium-sized systems.

... industrial metal construction, as it can also form larger parts with sheet thicknesses of up to 3 mm steel sheet. The machine is available with a large range of tools (tools not included with the machine). • 2 selectable stroke speeds • Adjustable return position • 4 programmable processing programs • Repeatable results • Electronic display/error diagnosis • Electric drive Max. formable...

... between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear. The assignment between temperature and output voltage is nearly freely selectable, the lesser temperature corresponding to the lesser output voltage. The sensor‘s lowest possible output voltage is 0.1 V and its greatest is 10 V. The output is overload-proof and short-circuit-proof. The sensor has no mechanical moving parts and so is not susceptible to vibration and soiling.

... simplified and clearer operation of the programming, the control panel is equipped with a touchscreen display. Extensive accessories allow for optimal adaptation of this robust universal machine to any winding task. Corrosion-sensitive parts are surface protected. All drives have sufficient reserves to achieve the longest possible service life, even under the most demanding operating conditions.

... high efficiency. For your production, the use of Hastamat dosing units means maximum investment and operational safety while ensuring gentle handling of the product and high output performance. Electronic monitoring: ✔ High dosing accuracy: ✔ High flexibility: ✔ Quick-change format parts: ✔...

... industry). Two factors are crucial for increasing efficiency: the use of optimized components and their perfect coordination with each other. All important components of the BLK®-6, such as reflectors, lamps, and electronic parts, are developed and manufactured in-house. With the help of ray tracing technology, we optimize our systems according to the application in terms of UV output and IR radiation share. Due to the high efficiency and low power consumption in standby mode, energy consumption is significantly reduced – another contribution to...

...We combine state-of-the-art electronic control (PLC) and mechanics to create modern control systems for your operation.

The company was founded in 1969 by Müllermeister Claus Friedrich. Initially, the business was operated as a sideline between milling and grain trading. With the further development of the products at that time, the company gradually evolved into a main source of income after the milling business was discontinued in 1972. Company Continuation Today, Müllermeister Claus Friedrich and his son, Dipl.

In recent years, the market for electronic and hydraulic components has changed significantly. Due to different requirements or simply a different perspective, international companies have developed innovative components for clamping, drive, and control technology. This enables designers to find new approaches to problem-solving in their applications. The EHC offering includes hydraulic component...

...stainless steel and aluminium upon request, in bare, tin-plated, nickel-plated and silver-plated. Depending on the customer requirements we can combine different contact elements and isolation materials. No matter if you need individual parts or large-scale production, we can guarantee a short development time and fast response. Flexible copper connectors are suitable for power transmission and potential equalisation / grounding.

... functional impairment, such as from acid, is completely excluded. An extremely practical, effective, and cost-efficient solution! Power losses are a thing of the past The bending parts used in the KHKU/KHAL as contact surfaces ensure better power transmission due to their smooth surface compared to cast parts. Universally applicable The KHKU/KHAL can be used in practically all galvanic baths with carriers that have a cross-sectional area of at least 50×10 mm.

...Enhancement of Kanigen® properties through the incorporation of PTFE lubricant particles for all parts that require dry lubrication convincing hydrophobic behavior and chemical resistance...

... rated at class 180 (H) and utilization in class 155 (F) - smooth shaft end — option for keyway - modular system allows for quick implementation of mechanical adjustments - a wide range of options available (holding brake, gearbox attachment, other measuring systems, winding variants, electronic nameplate, etc.)...

... micromanipulator, kits • Xcelite®: Knives & blades, pliers & side cutters, screwdrivers & socket sets, Series 99 service kits & sets, toolboxes, specialty tools • Kahnetics®: Dispensing devices, hand dispensers, cartridge adapters, dispensing needles, spare parts • Wire-Wrap®: Wrapping tools, wrapping inserts & guide sleeves, stripping pliers, spare parts...

...robin Electronic Charger TNE 4 12 V (switchable to 24V or 12/24V) For fire service, rescue, and municipal vehicles Versions: 12 Volt device (TNE 4) Portable With approx. 5 m spiral cable and charging plug DIN 14690 Technical Data Mains Voltage 230V, 50 / 60 Hz Charging Voltage 12 Volt Charging Current 6 Amp. effective, 4 Amp. arithmetic. Charging Curve / Characteristic IU characteristic...

...Container Dri® II transport desiccants absorb moisture and thus prevent the condensation on container walls, commonly referred to as "container rain." Benefits - Various designs - 300% absorption capacity - Suitable for many different applications: machinery and equipment, auto parts, powder and electronic products, food additives and canned goods, agricultural products such as coffee and...