KB Schmiedetechnik GmbH is a family-owned forging company with approximately 100 employees, specializing in small series of safety-relevant forged parts made from all types of steel - including duplex and titanium. Extensive approvals for pressure equipment, shipbuilding, and nuclear technology. Raw part weights from 200g to 130kg and maximum length: 600mm.
We manufacture according to the followi...
... measurement intervals >0.4 s)
Memory capacity: 50,000 measurement points per channel (non-distributed)
Resolution: 0.1 °C
Measurement interval: 0.05 s to 10 min
Connectivity: Bluetooth; USB for programming, charging & downloading; optional wireless data transmission
Battery type: Rechargeable, replaceable NiMH
Thermocouples: Type K
Start/stop trigger: Manual via button, automatic time and temperature triggers...
... industrial sectors.
E2 mini
One-/Two-piece E-Chain®
Small pitch for silent operation
High torsion resistance
Double stop system and large pins for long service life
Optimized weight/stability ratio
Easy to mount
Manifold interior separation
Typical industrial sectors and applications
Construction machinery
Handling systems
Installation
Packaging machines
Textile machines
Vehicle construction
Wood...
...Conventional spray bottles cannot be used at an angle or upside down; once the suction tube is no longer submerged in the liquid, they stop spraying.
Not so with our Turn'n'Spray upside-down spray bottle. Its special technology allows spraying from any position. This way, you can spray practically and comfortably from all directions, easily reaching hard-to-access areas without straining.
High-quality, refillable spray bottle for multiple uses.
Medium-contact materials: PP, PE, silicone, and stainless steel
Spray volume per stroke: 1.2 ml ± 0.1...
...Especially suitable for:
Medium and large fire stops with medium to high occupancy
Mixed occupancy of cables and non-combustible pipes
Fire stops with frequently changing occupancy
Approval number Z-19.15-1744
Fire stop type: Combination fire stop, cable fire stop
Fire resistance class: S 90, S 60, S 30
Components: Solid walls, solid ceilings, lightweight walls
Component opening: rectangular...
... signal exchange
Application:
- Dosing of viscous to highly viscous, shear-sensitive, and abrasive products, such as silicones, metallic-filled pastes (Cu and Ni solder pastes, Al and Ag pastes), adhesives and sealants, paints,...
Dosing accuracy: +/- 1% (depending on medium)
electrical connection data (power supply): 310 VA, 230 V, 50 Hz
usable dispensers: 4RD6-EC, 3RD8-EC, 3RD10-EC or 3RD12-EC...
...
- Universally and flexibly applicable
- Reduction of cleaning and waste disposal costs
- Optimal use of fluids
- No loss of medium when taking the pump from drum to drum
Flow rate::max. 35 l/min
Delivery head::max. 8 mwc
Viscosity::min. 1 mPas - max. 600 mPa
Outer tube diameter::max. 41 mm
Immersion length::1000, 1200
Materials outer tube::Stainless steel
Media / Fluids::Solvents, Fuels, Petroleum products, Highly flammable media
Seal::with mechanical seal
Container::1000 l IBC, 200 l drums...
... that are in contact with the medium are part of the comprehensive standard equipment.
Display:with touchscreen
Type:circulating water
Use:cooling,for injection molding machines,process
Other characteristics:compact...
...
* Optionally with electric or compressed air drive
* Low loss of medium when disconnected
* Simple installation
* Easy to dismantle
* Small footprint
* Automatic emergency stop function of the motor in case of leakage detection
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter....
...crimping height 180 mm
Max profile width 100 mm + 55 mm web
Min. frame dimension inside 195 mm
2 excenter disc for good positioning of profiles
2 pneumatic down clamps
Adjustable height of the V-stop, crimping knives and V-blocks
3 pairs of standard crimping knives 3/5/7 mm
2 V-blocks 15 / 30 mm
Split horizontal punching heads to compensate profile off-set up to 40 mm
Use of 3 punching knives each crimping unit
Force 64 KN at 8 bar each crimping unit
Automatic counter support to compensate profile off-set or tolerances
V-blocks adjustable up to 160mm
Operation:
Pressure: 6-8 bar
Air...
...Control valves and directional valves clear, block or change the flow direction of the medium used. They control the direction of the volume flow, i.e. the exit direction of a cylinder, and through start-stop commands the travel distance of the stroke. Our product range includes manual, pneumatic and electro-pneumatic actuated valves in 3/2-, 5/2- and 5/3-directional design. Directional valves acc. to NAMUR, supply units, base plates, logistics modules and two-handed safety control valves add to the assortment.
... options like an open end, box end, flare end, hex key end, or a ratchet head.
Preset wrenches are ideal for fastening applications where operators repeatedly assemble parts at the same torque setting and ensure that the correct torque value is consistently applied to each fastener by reducing the risk of setting tampering by operators.
The TB wrench breaks over once it achieves its preset torque setting, signaling the operator to stop applying torque to the fastener or bolt. The wrench improves the fastening process by reducing either over or under-tightening risk.
[...]...
...The APODIS Paint-Stop fiberglass spray paint filter mats capture paint mist from the exhaust air, protecting exhaust ducts, fans, and motors from paint mist deposits.
The low compressibility of the randomly arranged fiberglass prevents the medium from being compressed under load, promoting high separation efficiency.
... plates are automatically removed from the magazine as needed, loaded, and then returned. This allows the powder press automation to operate independently for extended periods without loading and unloading processes causing a press stop. Additional tasks such as weighing or deburring the pressed parts are also performed fully automatically.
With the integrated 4-axis SCARA robot, the machine achieves very high system speeds of up to 30 strokes/min. This makes the "RPA 10" ideally suited for connection to electric presses with high cycle performance.
COUNTRY OF ORIGIN: Germany...
...A flange valve/stop valve made of red brass with internal threads on both sides and a handwheel. The stop valve can be used for hot water up to 160 °C. The handwheel allows for easy and slow opening and closing of the stop valve, thereby preventing strong pressure changes in the pipeline. The flow direction of the medium can occur in both directions with a flange valve, unlike a ball valve.
The...
...Horizontal and vertical clamps made of galvanized steel sheet for light to medium clamping tasks.
• High-quality surface protection, optionally made of stainless steel for special applications under moisture and water conditions
• Ergonomic plastic handle with secure press fit mounted
• Long service life due to robust solid rivet made of stainless steel and hardened bearing bushings
• Two-part clamping arm for quick assembly and disassembly of the workpiece
Internal stop for defined clamping arm position...
...Transport cover suitable for Multiflex module racks
variable configuration up to 6x2U.
The recessed indentations in the foam secure the module racks in place.
9 mm multiplex coated in black
30x30 mm aluminum edge
at least 2 cm foam padding
4 folding handles
4 medium-spring butterfly latches with stop
large steel corner brackets
4 swivel casters 100 mm, 2 of which are braked (load capacity up to...
... by pressure or radar sensors
visualisation. This enables operators to respond to low quantities in time.
between tanks allow maintenance to be carried out on individual components without it being necessory to stop production
The downstream transfer systems, which include pumps, lters, sensors and fittings have been adaptod to the medium and are always completely pre assembled...
... bearings with Ø3, Ø4, Ø5 or Ø6mm are used for contour processing with the VHM milling cutters. Tapered contour chamfers are used in combination with guide fingers or stop rulers.
Motor:0.25 kW | 9,000 - 21,000 rpm
Energy :230 V, 50/60 Hz
Maximum chamfer width:3 mm
Guide ball bearing:min. Ø 3 mm
Dimensions (LxWxH):280 x 300 x 205 mm
Weight :21,3 kg
Item no. :68674...
...Mobile, compact, transportable by car. Without tank, medium supply via suction unit. No metering of cleaning agent. Stepless adjustable pressure. Filter unit with de-airing system. Start/stop via spray pistol. 5 m hose with quick change lance SR-LA 600, 5m suction hose. 10 KW, 16A.
...The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering.
Due to its short design, this hydraulic buffer (COMPENSER®) can be used in a spacesaving manner as limitation of the end position (as emergency end stop) in...
... with evenly distributed weight. These shelves are the ideal solution for storing and organizing file folders and similar formats. All shelves of the individual compartments are equipped with a stop edge to prevent accidental sliding of the folders. You can customize the bolt system according to your preferences, as it connects base and extension fields through its modular design.
...) in February 2008
Completion of the new building in May 2008
Construction stop and denial of use by the OVG - Bautzen in June 2008, one day before commissioning
Rental of a production facility (approx. 2,000 m²) in Chemnitz as an alternative implementation of the newly acquired machining center DMU 200 FD into the Chemnitz facility
2009 – 2010; Number of employees 85
Commissioning of the new...
... and exterior cleaning of airplanes.
Business Area Graffiti:
Manufacturing and trading of anti-graffiti protection systems, graffiti removal, impregnation, and hydrophobization agents (OS-A). We take on all related services as a service provider. Furthermore, we are manufacturers of specialty cleaning agents for the industry. We conduct quality measurements on concrete pavements damaged by alkali-silica reactions (ASR, concrete cancer) and offer specially manufactured protective products to stop or "freeze" these reactions.
... customer envisions collaboration today.
Therefore, we stand for a one-stop solution. All areas are under our direct influence. We advise and showcase what is possible in our exhibition, we deliver the goods, we embroider, we print, we sew, we store, and we ship—all from one house. We are also happy to show interested customers our production, as this often leads to an "oh, that's how it works...
... representatives in Europe for Functional Safety, electrical safety, and drive technology. Wherever people, machines, and plants need to be protected from damage and productivity needs to be increased, DOLD products are successfully in use.
For example, safety switching devices, such as standstill monitors, speed monitors, and radio emergency stop systems, ensure quick and reliable shutdown of plants in...