Results for

Stamping parts for the electrical industry - Germany

11 Companies

0 Products

BADE UND RINSCHEID METALLWARENFABRIK GMBH

Germany

We process belt and sheet material from 0.2 to 6 mm sheet thickness. We have invested in optimised machine units especially for processing aluminium strips, but not only for this purpose. Automatic punching presses, hydraulic presses and eccentric presses with pressing forces up to 3150 kN process belts/coils up to 600 mm wide. Tight dimensional tolerances, high flatness requirements and other technically demanding quality features are produced by us and partly controlled "in line". With our cleaning systems, which use organic, CHC-free cleaning agents in an environmentally friendly manner, we are also able to meet special cleanliness requirements – based on current standards for residual dirt identification. Through responsible management, we ensure that high quality standards – based on customer requirements – are achieved. Flat structures ensure careful, target-oriented and fast implementation of our customer orders.

Website
METALLWARENFABRIK GEMMINGEN GMBH

Germany

Metallwarenfabrik Gemmingen GmbH produces components for electrical mechanical engineering, alternators and generator systems in two factories. Metallwarenfabrik Gemmingen GmbH was founded in 1961. We began producing stamped and die-cast parts for the electrical industry the very same year. Soon after, we began manufacturing the entire IEC standard motor series and developing complete solutions for the construction of electric motors. Everything comes from a single source. State-of-the-art production, storage and communications technologies mean that all parts are available in next to no time. We focus on power generation in everything we do. This is an area in which we have specialised for many years, so we have a great deal of experience to offer customers. Thanks to this experience, the advice of GEKO specialists regarding generator construction is sought after internationally. For complex custom productions but also for complicated military applications.

Website
WFW UMFORMTECHNIK GMBH

Germany

Founded in 1993 as a sheet and metal processing company by three people in Weddersleben, the company has developed into a medium-sized company currently with 14 employees. At the start, we manufactured simple, straightforward stamped parts on old used machinery. Now, we use modern CNC-controlled stamping and bending technology. Over time, the products have become more demanding, more complicated and of higher quality. Our customers are primarily located all over Germany. Here, we produce metal parts which are stamped, bent, sawn and welded. The demand for these has continually increased and now covers fixing parts for trade, housing construction and the assembly of components for high-tech medical equipment through to sheet metal stamped parts. The production building at it's current location at Klopstockweg 25 has been gradually modernised. Construction measures have been taken alongside actual production.

Website
RUPF INDUSTRIES GMBH

Germany

The RUPF Industries Group is a medium-sized, family-managed corporate group, whose origins stretch back to 1859. Today, the Group is active in the following business fields: Automotive engineering – BHC Gummi-Metall GmbH rubber-metal compounds, vibration-reducing components for a chassis, powertrain and storage of cabs and structures in industrial vehicles, trains, agricultural and construction machinery; bushes, support bearings, engine mounts, spherical bearings, conical springs, layer springs, axle guides, wheel set guides and trailing arms. – KHT Fahrzeugteile GmbH – turning, milling, welding, assembly; control rods for headlight range adjustment or for level regulation of the air spring system in automobiles; switch rods and selector levers; rods for controlling the load brake and cabin suspension in multi-wheel drive lorries; guide rods and ball joints for bus doors and luggage compartment lids. – R&P Umformtechnik GmbH & Co. KG produces stamped parts from the smallest precision stamped part right up to complex assemblies, as a supplier in the Group as well as for third-party customers in the sectors of the vehicle industry, mechanical engineering, the furnishings industry, the sanitary industry and the electrical industry. – RUPF ATG Casting GmbH – melting, casting, processing, assembly; complex, processed die casting components that are installed pre-finished and modules made of aluminium and zinc for applications in the automotive sector (housing, camshaft adjusters) and the industrial sector (drives).
REINLE GUMMI & KUNSTSTOFF GMBH

Germany

Ideas in good hands. Since 2000, Reinle Technik GmbH has been certified in accordance with the DIN EN ISO 9001 quality standard. We have been providing our partners from the industrial engineering, automotive and electrical industry with tailored solutions for a number of years. With state-of-the-art production techniques, flexibility, speed and expertise, as well as the commitment of all employees, ideas and requirements become precise technical parts made of rubber and plastic. For you, we manufacture and process: Stamped parts – profiles – formed parts – acrylic finished parts – plastics – elastomers – cellular materials – acrylic glass. We supply you with technical building products: Installation foams for assembly, thermal insulation and sound insulation measures, silicones for special applications, backing tapes, cork stacking discs.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

HAISCH + STRAUB GMBH

Germany

Your specialist in cardboard discs, cardboard threaded plugs, cardboard plugs, threaded protective plugs. Haisch + Straub GmbH can already look back on 40 years of experience in the production of cardboard discs, cardboard deep-drawn parts and stamped items made from cardboard and plastics. We supply pyrotechnics, the electrical industry and the automotive industry, as well as their suppliers. To ensure customer satisfaction, we have set up very strict QM systems. ISO certificates are a given for us. Our employees are constantly further trained in the TQM system, and our process and production are steered in this direction.

Website
PIERON GMBH

Germany

Since 1925, PIERON – a family-owned company now in the hands of its fourth generation – has manufactured technical springs for almost all industry sectors. We focus on the automotive as well as on the electrical and sports equipment industries. At our Bocholt site, over 270 employees implement new solutions in the product areas of annular, compression and torsion springs as well as stamped, bent and wire bent parts on an operating area of approx. 20, 000 m². Special parts and assemblies complete our product range. State-of-the-art manufacturing processes guarantee production that meets the highest requirements.

Website See all products
DESTA MICROCUT GMBH & CO KG

Germany

Laser precision cutting, water jet micro precision cutting, micro water jet: We are YOUR partner for implementing your ideas and producing according to your requirements. From consultation on production-ready design and the selection of the best and most economical production process, right up to the manufacture of prototypes and small and medium-sized series of stamping blanks, lead frames and stamped and bent parts. Laser precision cutting, micro water jet cutting, wire eroding, stamping, milling, embossing, bending, galvanising, laser marking and assembling – with our own tool manufacturing and fixture construction. A flexible, dedicated team, the extensive capacities of the most diverse, most modern CNC machines and a large store of a wide range of materials ensure flexibility, immediacy, quality and punctuality. We supply mechatronic elements, mechanical system components, automotive technology, medical technology, electrical engineering, mechanical engineering, the pharmaceutical industry, watch and jewellery industry and the eyewear industry.

See all products
GEBR. UNGLAUB & CO GMBH

Germany

Our production range includes: Technical pressed parts and stamped parts made from aluminium, ALMgSi alloys and electrolytic copper. The following dimensions can be delivered: Panels from 0.15 mm/Lengths up to 320 mm/Circular up to a diameter of 120 mm/Square up to 120 mm x 120 mm/Rectangular up to 200 mm x 80 mm. Our machinery includes: Toggle lever presses with a pressing force of up to 1000 t, eccentric presses with a pressing force of up to 80 t, cutting machines, beading machines, degreasing systems. Automatic machines and CNC turned parts in accordance with DIN or factory standards from almost all metal materials. We produce components up to 350 mm in length and up to 200 mm in diameter in chuck machining and bar machining. Our machinery includes: Automatic curve lathes, CNC lathes, milling machines. We will provide you with paint cups, pressurised vessels for paint spray guns with screw-type, buckle or bayonet catch fasteners, with internal and external threads, as well as viscosity measuring cups. Our machinery includes: Automatic metal printing machines, automatic turret lathes, eccentric presses. In-house toolmaking and fixture construction.

Website
E. DOLD & SÖHNE GMBH & CO. KG

Germany

E. Dold & Söhne KG - Solutions for automation E. Dold & Söhne KG is an internationally operating medium-sized family enterprise. It develops, manufactures and sells high-quality components along with complete solutions in the area of safe automation for facility and machine building worldwide. DOLD has successfully managed to undergo continuous development: from paving the way as a pioneer in relay technology to being the leading industry representative for functional safety, electrical safety and drive technology in Europe. DOLD products are successfully utilized whenever people, machines or equipment must be protected from damage and whenever productivity requires enhancement. For example, safety switching devices such as standstill, speed monitors and radio controlled emergency stop systems ensure the quick and dependable deactivation of facilities during hazardous situations for practically any industry. Safety switch and trapped key interlock systems allow for the wireless safeguarding of safety doors. Innovative monitoring solutions such as insulation monitors ensure high availability and guarantee that facilities are electrically protected.

Website See all products

ROLEC GEHÄUSE-SYSTEME GMBH

Germany

ROLEC has a proud history as a market leader in the design and development of new concepts in enclosures, command enclosures and suspension systems. The company founders Friedhelm and Matthias Rose are pioneers in enclosures technology. Providing our customers with fully matured designs of the highest quality and value is our prime objective. Today ROLEC manufactures an extensive range of modern high performance enclosures typically rated from IP 66 to IP 67. The range includes die cast and extruded aluminium enclosures, GRP polyester enclosures and ABS or polycarbonate plastic enclosures. Naturally top products have to go together with top customer service. This includes the human factor - meaning a friendly environment - and first class service. The ready for installation customising of enclosures and command enclosures is our specialty: Be it drilling, milling, laser processing, engraving, powder coating, painting, printing, electrolytic polishing, hard-facing, the supply of face plates or membrane keyboards - ROLEC offers its customers fully finished enclosures ready for mounting the equipment. With our suspension systems we also provide great service. For example all couplings are already installed. In addition we offer a sample installation free of charge. Interested in finding out what else we have in stock? Take your time to browse our website and don't hesitate to get in touch with us. We look forward to your individual requirements.

All the products for "stamping parts for the electrical industry"

aluCLIC

aluTWIN

polyTOP

aluKOM

conFORM

Website See all products

Find quotes for

Filters

Results for

Stamping parts for the electrical industry - Germany

Number of results

11 Companies