spraying system Germany

...We developed a special process for making fine powder systems and composites from low-viscosity melts. With the patented cryo-spraying process CSP, it has become possible to produce highly sensitive products directly from a hot melt to form a solid powder without after-cooling. The entire spraying process is overlaid with nitrogen and also protects very critical substances against oxidation and thermal stress.

...System for spray quality monitoring a multitude of spray nozzles e.g. for agricultural sprayers...

... nozzles...) as well as the option to retrofit it with an FSSA sole spraying beam for winter service. This allows for effective use of our diverse tank systems throughout the year. Tank volume: 230 to 17,600 l Pumps: Low/Medium/High-pressure pumps Design: Flexible cascade design...

... - Activators/Primers - Abrasive media - Adhesives - Silicones - Solid-loaded media - etc. Advantages: - Constant amount/area - Uniform spray pattern - Even coating - Minimal overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spreadability - Adjustable circular spray - From spot spraying to continuous spraying - Low-maintenance system - Independent control of medium flow and atomizing air - High application efficiency Dimensions: Length 228 mm, Ø 35 mm Minimum spray amount: 50 μl Switching frequency: over 100 cycles/min...

...Effective Tablet Coating: Up to 35% Shorter Process Time than Conventional Systems Spraying, Mixing, and Drying - Coating is a combination of these process steps. For optimal coating uniformity, the processes of spraying, mixing, and drying must occur simultaneously. For years, L.B. Bohle has been offering the most efficient and effective tablet coaters on the market. The BTC tablet coater promises an economical and sustainable tablet coating. The quality of the process is ensured by a flat tablet bed, optimized air flow, and high spray volumes.

... In the food industry the atomisers and dosing systems of Mantis can be used everywhere where liquids have to applied uniformly and sparingly. This could for example be the application of release agents onto baking trays and dishes or the application of flavouring substances. Don’t hesitate to contact us! We offer an optimally adjusted spraying system also for your application area!

QUALITY MADE IN GERMANY – FOR COATING SYSTEMS WORLDWIDE Since 1925, Sprimag has been developing systems for functional and decorative coating of series parts and for the internal coating of metal packaging. At its current headquarters in Kirchheim-Teck, Sprimag employs around 180 staff and has branches in the USA and Mexico. As one of the few providers in the market, Sprimag also develops its own...

..."Made in Germany" ABAC HVLP Paint Spraying System SG 2000: Motor Blower ABAC SG 2000, Spray Gun ABAC PN 1A, Air Hose 6 m., Dipper for Viscosity Checks, 2 Spare Intake Filters. Scope of Supply: Adjustable low-pressure motor blower SG 2000 with continuous pressure regulation and 5 m connecting cable. Spray gun PN 1A with intermittent air supply, with 3 nozzles 1 - 1,5 - 2 mm and 0,7 I...

...{"CANYON CHS-3A for Professional Use":"https://www.lindner-kunststoffprodukte.de/wp-content/uploads/2017/12/Lindner_Spruehkoepfe_CHS-3A.pdf","Product Overview":"https://www.lindner-kunststoffprodukte.de/produkte/","PET Bottle Monti":"https://www.lindner-kunststoffprodukte.de/wp-content/uploads/2018/10/Lindner_PET-Zylinderflaschen_Monti.pdf","Material":"PE and PET","CANYON CHS-3ANS for Professional Use Overhead Spraying System":"https://www.lindner-kunststoffprodukte.de/wp-content/uploads/2017/12/Lindner_Spruehkoepfe_CHS-3ANS.pdf"}...

MOC has been specializing in the development and manufacturing of cleaning systems for over 50 years. MOC is now one of the leading manufacturers of cleaning systems in Germany. We offer a wide range of features, including ultrasonic cleaning, recirculation, and coalescence separators. Our product range includes various types of cleaning systems such as immersion cleaning systems, spray washing sy...

... fixation — Freely adjustable cutting entry and exit point — Extremely robust gooseneck for reliable clamping — Long clamping stroke of 160 mm — Reduction of manual clamping force — Optional micro-spraying — Two-hand control — Piece counter Type: stationary Technology: circular Material processed: for metals Applications: for profiles, for pipes Other features: semi-automatic, high performance, upward blade...

...Suitable for water-based paint strippers with operating temperatures of up to 90 °C. Modular design for the highest level of safety and (if needed) customization to the desired height of the spraying chamber. Electronics and paint stripping agent tank in separate "technical module." Uniform coating of the workpieces through the use of a nozzle system in the spraying chamber, consisting of...

... rotary atomizer can handle high loads, making the ROTOSPRAY system especially suitable for use in robotized applications. To cater for individual requirements, the rotary atomizer is available with specific connection layouts and housing variants.

... motor-driven spraying rotor completely revolves around the loaded parts. The washing system is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed. ...

... pressure vessel, pump, and spray nozzles. They serve as the interface for the electrical control or connection of the spraying system. Valve cabinets, as an additional expansion stage, further protect the components of the valve unit from dirt and create a uniform overall appearance on the machine, especially in extensive setups.

...Disinfectant dispenser with automatic spraying system. with wooden mounting Sensor range 0-12 cm (infrared sensor) Battery life (type AA) 1000 hours (batteries not included) 1000ml filling quantity Quantity per spraying process 1.2 ml Including security key for filling...

... time. Properties and Applications: - Unsaturated polyester resin - Orthophthalic acid-based, pre-accelerated, thixotropic - Cures tacky on the air side, very suitable for over-laminating - Good mechanical properties - Usable as a soaking and laminating resin system - Suitable for the production of glass fiber reinforced components - Suitable for hand lay-up, fiber spraying, centrifugal, and winding...

...Precise system performance in critical processes with our two-phase, fine atomization, and humidification nozzles.

...We offer efficient solutions for demanding and durable surfaces. Low-pressure plasma spraying allows for a significant increase in adhesion tensile strength, density, and purity of the coatings compared to atmospheric plasma spraying. Essentially, a low-pressure plasma system consists of the following components: Plasma spray gun and control cabinet (plasma gases, carrier gas, powder feed, current, voltage, cooling water, etc.), DC power supply, HF plasma ignition, powder feeder, vacuum tank with movement system for workpiece and plasma gun, filtration systems, and pump station.

...A wide range of standard nozzles with various flow rates and spray angles are available to you. Our spray nozzle system is designed for equipping pre-treatment systems, industrial washing and cleaning machines, irrigation systems, and humidification systems. Easy to handle during new installations, when changing nozzles, or when replacing complete nozzle holders. Suitable for pipe diameters...

... of the spray arm facilitates handling. Explosion protection: Design of the system for the use of organic solvents (acetone, isopropanol, ethanol). Fully automatic spray arm: Regulates the distance between the nozzle and the tablet bed as well as the spray angle to the tablet bed. Drageeing: The Lödige coater can be equipped to produce film-coated tablets as well as dragees. Mini-tablets or pellets: The drum perforation can be tailored to the product in various sizes. Qualification: Complete qualification documentation, including risk analysis-based design documents, GAMP5.

...Two-fluid system with 7 bar compressed air and 3 bar water pressure. Mist of air and water: NEBOLEX DuoFlex is a proven and highly efficient nebulization technology.

...For a multi-stage spraying and drying process. Suitable for large parts with simple geometry as well as for smaller workpieces such as camshafts, gear wheels, and axle drive wheels.

... the hood. - Binder pump with pressure relief valve and hydraulic drive, allowing for suction, circulation, and intake from the drum. - Water-cooled 3-cylinder Kubota diesel engine with electric start system. - The cooling water from the diesel engine is used to heat the binder pump, bitumen filter, and spray bar. The binder tank is preheated by a propane gas burner system. The automatic gas burner system is equipped with all relevant safety features. - A compressed air cleaning system with a small compressor is available for cleaning the binder pump, spray bar, and bitumen hoses.

...Labeling shipping labels without backing material, avoiding thousands of tons of waste material, and simultaneously reducing the carbon footprint - this is possible with our sustainable and innovative printing & labeling system PA4 / PA6 InNo-Liner. With the labeling machine and the associated components such as cutting, micro-spraying, and linear unit, the material is printed, cut, activated...

... external components. The measurement is ideally conducted in combination with a BlowerDoor measurement system. Under negative pressure, even small leaks can be detected. Diagnostics can also be supported by a thermal imaging camera.

... method ensures cleaning success for a wide range of parts. Equipment Electric direct heating, insulation, digital thermostat, immersion pump, stainless steel nozzle system, coarse filter insert, turntable with direct drive, steam extraction.

...Mobile, compact and multifunctional. Whether as manual spraying equipment or as compact solution for experiments. The compact pressure vessels with up to 18 litres useful volume are suitable for all tasks. The particularly easy handling makes these containers a popular entry-level solution. By using proven components, the spray unit is perfectly suited for long-term use. The pressure tanks with a self-developed circulation system are also suitable for spraying lubricants or coatings with solid content. For particularly easy transport, all pressure vessels can be equipped with a chassis.

For 50 years, WP RIEHLE bakery machines have stood for German quality craftsmanship and Swabian ingenuity at the highest level. Our equipment is used worldwide in bakeries, hotels, supermarkets, and other businesses in the food industry. With our frying machines, glazing systems, tray cleaning systems, and our infrared oven, we provide snacks made by WP RIEHLE globally and enjoy great trust in the...

...If you are using a liquid or liquids with a viscosity of up to a maximum of 100 mm²/s at 20°C (excluding paints, resins, adhesives), then our self-priming systems from the TCJ series are just right for you. The advantage of our TCJ system is the reduction and avoidance of dirt entry into your process. Our 10 and 25-liter systems are designed to fit standard liquid containers. This allows for a...