rapid tool Germany

iMed is a competent provider of technical precision parts and assemblies made of plastic in small, medium, and large series for use in key industries. As a system supplier, iMed has over a decade of experience. This experience is not limited to a single industry. Not only the use of state-of-the-art technology has secured satisfied, long-term customers and their trust in the production quality of...

... Capto, KM, ABS and HSK. The applications range from classic CNC lathes to highly complex turning milling centers. The rapid change system EWS-Varia has set a standard for a flexible modular system. With its safe handling and short change-over times, EWS-Varia ranks among the most successful systems in the market. This was impressively confirmed by the Innovation Award awarded by the German state of Baden-Württemberg in 2006. "Made in Germany" is of course guaranteed by EWS also for these tool systems.

...The Honsel force adjustment tool for the rapid installation of large quantities in mass production. The control through the required setting of the installation force allows for an always optimal and careful installation of blind rivet nuts with respect to the material. The VNG 703 tool stands out for its user-friendly design and simple operation. The switching between forward and reverse is...

... technology, or the supply industry: the C 42 is at home in all sectors. The space-saving, ring-shaped tool magazine integrated into the base body operates on the pick-up principle, allowing for quick tool changes. In its standard configuration, the C 42 accommodates 42 tools but can be expanded to 192 slots. The control panel can be easily adapted to the respective user. A model from the MT series...

...Technical information The AM 04.1 is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose uninsulated Z+F ferrules. The stripper-crimper can be adapted by using the corresponding tools for ferrules of cross-sections from 4 up to 10 mm2 (AWG 12-8) and crimping lengths from 9mm to 18mm. Specification For definition of the required tools the correct specification of the processed ferrules as well as the processed wires are needed. Options: Quardrocrimp-tool The stripper-crimper can be equipped with a quadrocrimp-tool, which creates a 4-side quadratic crimp.

... service life thanks to non-actively driven sharpening discs Sharpening unit positioning via sighting tool Gentle processing due to clever sharpening technology Quick, reproducible sharpening Counter for the individual specification of sharpening cycles Short set-up times Simple operation Clear, robust technology Sharpening cycles:can be selected from 1 – 99999 Sharpening angle:15° – 35° (infinitely adjustable) Height (mm):1245 Width (mm):735 Length (mm):800 Weight (kg):105 Power supply (V/Hz/A): 400/50/16...

...), the use of plastics in new applications, and the rapid advancement of technology in the solutions available on the market. When selecting the tempering system, it is important to ensure that it is precisely tailored to the application and that the economic benefits justify both the technical effort and the energy consumption. Usage: for injection molding, cooling, for heating purposes...

...2.4 GHz Preset Clicker-Type Torque Wrenches Sturtevant Richmont 2.4 GHz Preset Clicker-Type Torque Wrenches incorporate the accuracy, repeatability and durability of our preset torque wrench lines that have made them a staple of assembly lines in many industries. The addition of the radio adds rapid operator and controller communication capability so they can be readily incorporated into your...

... horizontally mounted •Rapid replacement of ink cartridge •Accurate marking due to ink retention film •Marking area is protected by cover •Compressed air: min. 1.5 bar •Dimensions (LxWxH): 210 x 240 x 310 mm Configuration:benchtop Other characteristics:compact,pneumatic...

... rapid positioning, alignment and clamping of workpieces. The material table is fitted with T-slots over its entire length, allowing even awkwardly shaped workpieces to be securely held in place by the flexible use of clamping fixtures. The LPS-T is able to cut even materials with different machining properties with the utmost precision without compromising on speed. This is made possible by a...

...The 2K process allows for the combination of two different types or colors of plastics into a complex molded part within a single process flow. • PC & ABS parts • Multi-component process (hard-soft) • Multi-color process In series production of complex parts, this can eliminate the need for elaborate assembly. Cost savings are achieved, allowing for the rapid amortization of the highly developed injection molding tool.

... tools (rapid tooling) also using 3D linear printers up to 270x200x210mm ◾ Series injection molding tools ◾ Series deep-drawing tools ◾ First sample production with individual sample test report ◾ Milling fixtures and operating resources ◾ Inspection gauges/testing devices as well as measurement recordings ◾ Simulation of deep-drawing processes using T-Sim software Conducting feasibility studies and rapid prototyping with models helps to gain synergy effects for series parts.

...This exceptionally versatile tool for post-molding assemblies is perfectly suited for all levels of production: from a single unit for prototype assembly to multiple units on an assembly line. The SPIROL® CM model manual compression limiter installation machine easily adapts to rapid changes by simply: 1. Replacing the device 2. Swapping the insertion punch/pusher tip 3. Adjusting the...

... needle, take care for a perfect feeding process. The special folders for different belt loops widths and fabric thicknesses are available in the following dimensions: Widths: 6, 5, 8, 10 and 12 mm Diameters of folders: 0.5, 1.0, 1.5 and 2.0 mm By means of a special rapid locking device the folders can be quickly exchanged within one belt loop width without any tool. Completely mounted on the sewing machine stand with maintenance unit, table board, with electronic motor 230/400 V, 50/60 c/s. With pressing iron device -B/2 with 2 irons (without steam) electronic puller, for attaching coated...

... interchangeable winding heads, wire guiding, and tensioning elements, the machine offers a short setup time, making it an efficient and versatile production tool for winding with wires up to approximately 1.2 mm in diameter. The AWA 120 is an economical machine for medium production series, providing cost-effective and rapid manufacturing.

... XPR 3+ provides far superior product protection compared to periodic rate of rise tests. DRIVNG PROFITABILITY BY MAXIMIZING TOOL UPTIME The Transpector XPR 3+ RGA is a field proven quadruple and dual ion source sensor for sputtering pressure range applications. No pressure conversion equipment is required, long lifetime components, and the ability to rapidly detect and diagnose problems combine to maximize tool availability, product throughput and yield. The sensor can be operated continuously from high vacuum to 20 mTorr, without the need for pumps. The Transpector XPR 3+ dual ion...

... 400 kg and a useful lift height of 1.5 to 5.0 m. The lifting direction and speed are controlled by turning a rotary handle via an electronic control system. The lifting speed is continuously adjusted in proportion to the rotation of the handle, allowing for very precise or rapid positioning. The operating height remains constant, regardless of the position of the gripping tool on the lift carriage. The IHF-Depomat is delivered as a pre-assembled unit with a lift carriage as a standardized gripping tool holder and the control elements for...

... operation range of types of fastening possible (exterior fastening, flat lid) works with all Schmale hinge and clasp models with fastening prongs meets current machine regulations 2006/42/EU “CE“ only branded components used very maintenance friendly service and maintenance available Made in Germany Technical Data Dimensions: Length 900 mm Width 1,150 mm Height 2150 mm Weight: ca. 320 kg Noise emission: 85 dB(A) Pneumatic operating pressure: 6±0,5 bar Cylinder compacting force: 14.600 N Hinge: All Schmale hinge models with fastening prongs Hinge lengths: depending on tool (10–50 mm) Work...

... Solution for emergencies CAD Engineering Rapid Prototyping Rapid Tooling Rapid Manufacturing Services Quantity Injection molding over 10,000 parts Die casting up to 10,000 parts Delivery Time 4 – 6 weeks...

...Alternatively, we can combine these technologies. The lifespan can range from a few hundred to 10,000 injection molded parts. The manufacturing of tools for small series also requires a rethink in tool design. Automated sliders are replaced by manual inserts; the use of erosion technology is attempted to be avoided; etc. All these factors lead to rapid tool production at a favorable price.

... without coolant system and accessories) X-axis travel: 300 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 300 mm Rapid traverse XY Z axis 60,000 mm/min 3 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) Knoll KSS system with paper belt filter and magnetic separator Flush gun Complete enclosure Tool storage (3 x 30 tools)...

...We have our own toolmaking facility equipped with modern machinery. This allows us to respond flexibly and individually to the increasing demand for custom parts. In the spirit of "rapid prototyping," we produce samples for you in the shortest possible time. We are happy to look for the right solution for your requirements. We store the tools for your order and keep them ready for future requests, so that they can be executed quickly and smoothly for you.

...Small series produced economically and swiftly using plastic injection molding. Whether for use as prototypes in quantities of 100 or for small series of several tens of thousands of pieces, we provide you with plastic injection molded parts in series material – completely from tool design, through the manufacturing of molds in aluminum or steel, to sampling and production of small series on our injection molding machines. The maximum shot weight is approximately 3.5 kg, and the largest parts we have produced so far measured about 1200 x 900 x 500 mm.

...Prototype tools, rapid prototyping, mold making, quick tools, 3D printing for tools, additive manufacturing of tools, small series tools, injection molding tools, prototype molds, casting tools, low volume production, tool manufacturing, prototype development, quick tool manufacturing, 3D printed tools, tool construction service.

... directly from Germany! Product details Test for the qualitative detection of the SARS-CoV-2 antigen Tool for diagnosing an acute SARS-CoV-2 infection On the list of the BfArM (Federal Institute for Drugs and Medical Devices) Sampling with a nasopharynx swab The test result is available after 15 minutes Sensitivity: 98.50%, specificity: 100% Store at room temperature (between 4 ° and 30 ° C) Please note that this rapid test may only be used by medical specialists! Excluded from the right of return Packaging unit: 25 test cassettes Contents per box ...

... Germany! Product Details - Test for the qualitative detection of the SARS-CoV-2 antigen - A tool for diagnosing an acute SARS-CoV-2 infection - Listed by the BfArM (Federal Institute for Drugs and Medical Devices) - Sample collection using a nasopharyngeal swab - Test results available after 15 minutes - Sensitivity: 98.50%, Specificity: 100% - Storage at room temperature (between 4° and 30°C) - Please note that this rapid test may only be used by medical professionals! - Excluded from the right of return - Packaging unit: 25 test cassettes...

...A variety of rapid prototyping technologies offered by citim operate entirely without tools, such as additive manufacturing. Nevertheless, there are still conditions that make the creation of a tool sensible. This includes, for example, a need for larger quantities, whether for field tests or more extensive trials. Sometimes, the necessity for a tool is technologically driven, as in the case of...

...Tool change systems for retrofitting and original equipment The days of tool pickup systems being "makeshift solutions" are over. With our innovative pickup systems, you can quickly and safely automate your machine tool. All tool positions and movements are monitored by sensors. The enclosure protects against accidents and keeps the tool holders clean. Prepared components and short integration times into the PLC from a single source ensure rapid commissioning. Increase productivity with "Plug and Play"...

... geometries with an unfavorable depth-to-width ratio. The hard copper layer ensures rapid and uniform heating of the tool due to the excellent thermal conductivity of copper. For spray tools, which have a manufacturing temperature of about 65 °C, a tempering line is applied to the back of the deposited nickel-copper system. This is backed with a metal-filled resin mixture. The nickel shell is mounted on a support frame.

...After several years of development, we have gradually become a diversified production company, specializing in product design, rapid prototyping, mold making, plastic injection molded parts, and precision turned and milled components. Tools, tool making, tool manufacturers, tool makers, molds, mold making, mold builders, molded parts, mold casting, injection molding, injection molding tools...