radio receiver Germany

...CDP-TX-02F-R and CDP-RX-02F-R are integrated narrowband FM transmitters and receivers for industrial applications. The modules are suitable for wireless data communication, remote control, telemetry, or wireless security systems. They are easy to handle and integrate into systems. The modules are also available in pin version CDP-TX-02FP-R and CDP-RX-02FP-R. Output power: 10 mW/1 mW switchable Data rate: 300 to 4800 bps Operating temperature range: -20 to +60°C Receiver sensitivity: -120 dBm Range: 500 m...

...Aluminum die-cast housing IP65 (here) with short rod antenna Lambda/4 (L: 17cm) for ISM band Range (depending on local conditions) approximately 80-120m with line of sight Power supply via receiver/evaluator FMS.04E This RF module is compatible with all devices in the FMS and UFS families The connection to the receiving device is standard via a 3m pre-assembled 5-pin cable with industrial connector. Alternatively, another RF module can be connected to FMS.04E, e.g., FMS.65-GA/F1B with a range of approximately 300-600m (depending on local conditions).

AUTEC is a leading manufacturer of radio remote controls with safety features for mobile and stationary machines used in construction, industry, material handling, and intralogistics.

...When the set torque is reached, the rotary slip clutch is activated. At the same time, a signal that it has been fully tightened is transmitted by radio. The LED "feedback" system lights up in the handle blue for OK, red for NG. An R-CM receiver (successor to the R-FH256) can recognise the IDs of up to four torque tools. However, simultaneous transmissions are not supported. By using it, a...

...With the EFB-EXP radio remote control receiver, the EFB-EXP user receives an immediately usable device for connecting a radio control to a PC or laptop with an Ethernet interface.

...In the case of wireless touch systems, the signal transmission to the transmitter/receiver unit SE occurs: • for TS 460 via radio or infrared • for TS 444, TS 642, TS 740 via infrared This makes these touch systems suitable for use on machines with automatic tool changers. The following transmitter/receiver units are available: • SE 660 for radio and infrared transmission; common SE for TS 460...

...The CR600 is a small but highly effective excavator and handheld receiver in one unit. Depending on the application, it can be universally used with a measuring rod holder or a magnetic attachment, for example, for the excavator arm. Furthermore, the CR600 can be used as a radio receiver for the Spectra GL72x slope laser. Technically, it features 7 accuracy levels and red/green LEDs, making it...

... integrated in the spindle -Clamping force is constantly monitored during its actual tension condition -Storing of the clamping forces can be called up at any time through the electronics integrated in the spindle -Power values are transmitted via radio to the mobile receiving unit (MWR) (2. 4 GHz) -MWR simultaneously and digitally displays the clamping force for up to 4 spindles in kN -The...

...RFID (Radio Frequency Identifikation) is a technology that uses electromagnetic waves to communicate between transmitter and receiver. The transmitter is a transponder containing a programmed unique code (UID), the receiver is a compatible reading unit. In the cards technology the transponders are flat coils with antenna integrated inside the PVC card - invisible from outside. The surface can be...

...SD9030 Dongle for Datalogic STAR Cordless Systems This compact receiver enables communication between a PowerScan™ PM9X00 and any host with a USB port. When used with a PM9XXX reader, the SD9030 dongle acts as a base station by providing USB communication to the host and implementing all functions of Datalogic's proprietary STAR 2.0 radio system. This allows for bidirectional communication and...

...Explanation of the Selection Menu Sets - What components are included in the sets? Insert Set Thermal bridge-free housing made of EPP plastic White interior wall cover 2 fans with EC direct current motors, 4 ventilation levels Counterflow heat exchanger Exhaust filter G4 Supply air filter F7 For type HRV B55: Electric preheating register For types HRM and HRV B55: Slot for radio receiver to connect radio control switches Complete Set (round) Insert Set (see above) Round wall sleeve with exterior wall cover Complete Set (square) Insert Set (see above) Square wall sleeve with exterior wall cover...

... control system you can learn to your old electromechanical operators with 230V the obstacle detection. That means, in case of obstacles the gate is immediately stopping and in shortly moving in opposite direction (in case of hydraulic operators is this function not possible). A plug-in position for the radio receiver art. n° 11B025 with 433 MHz integrated. For sure, you can also connect already existing radio receiver. Dimensions of the box: 300 x 230 x 100 mm...

...Simple and very comfortable, including 6 m chain, counterweight, remote control, and radio receiver. The modern barrier solution has been developed to protect parking spaces and driveways in both public and private areas. It consists of two compact columns, one of which houses the technical details. The columns are connected by a chain, mostly made of nylon. The convenient technology allows you...

... operation or with external DCF77 radio receiver. Housing - Fully ready-to-connect device - Elegant anodized aluminum housing (The housing is also available in RAL colors upon request, e.g., Black, White...) - Protection class IP 54 / IP 65 - Wide viewing angle - Supply voltage 230 VAC (Optional 24 VDC) - Available options External radio reception antenna for optimal precision (Antenna DCF 77) Temperature sensor...

... edge safety 8K2 or 22K Status and fault indication End position reports potential-free Control of traffic light Slot for radio receiver Slot for loop detector 35 mm standard rail for additional devices Optional accessories Traffic light Light barrier Radio Command device Switching bar 2-channel loop detector...

...The STArter is the first sliding gate drive of a new generation, impressing with its easy installation. The STArter+ is even stronger and faster than the STArter due to its "chip tuning." For sliding gates with a travel length of up to 8 m and a gate weight of 400 kg. Single drive "STArter" - including 1x sliding gate drive - motor control - integrated radio receiver (FM 868.8 MHz) - universal...

... applications in water supply where, for example, there is no power supply available in elevated tanks or pumping stations. The specifications in detail are: - Receiver sensitivity 116 dB - Transmission speed up to 140 kBit/s - Access Point, Client, Router, and Bridge in one device - 400..480 MHz, 10mW to 10 W, adjustable - Range without line of sight several kilometers - RS232, USB - 128 Bit AES encryption and firewall - 4 digital inputs, of which 3 can be configured as pulse inputs - 2 analog inputs - SDI-12 input - Configuration and diagnostics via USB...

...Discover the double-leaf gate automation model. FAAC HANDY KIT includes two FAAC S418 operators, the E024S control cabinet, the radio receiver, and a remote control. This kit is designed to ensure maximum safety for users and third parties. It is easy and quick to install thanks to the "multi-position" mounting plates.

...Switch your radio relay receiver on and off comfortably with your smartphone in a WLAN enviroment. The clever way to start with home automation. Conveniently and comfortably switched connected devices on and off from your couch from your smartphone e.g.: - Indoor/outdoor lighting - Entertainment electronics - Garden pond pump - Fans - Christmas lights etc. Control the 433 MHz wireless relay...

...Electromechanical 24 V barrier for intensive use with a closing width of up to 3 m (Giotto BT 30/30S) or 5 m (Giotto BT 50/50S). Complete with built-in and pre-wired motor control featuring a display and integrated radio receiver. The control unit is integrated under the upper cover. End switch system with electronic adjustment (BT range), which speeds up installation and ensures maximum precision of movement. Buffer batteries for emergency power supply are optionally available.

...EWFS and WMS, the radio systems from WAREMA, control your sun protection or lighting conveniently via radio. The installation of individual components is done via plug & play directly on the sun protection product.

...Sliding Gate Drive Set Bull 624 24 Volt, up to 600 kg gate weight - Non-contact limit switches - Force cut-off - Walk door function - Automatic travel and force adjustment - Input for safety contact strip - Soft start + soft stop Set: Drive including control Radio receiver 2-channel Hand transmitter 2-channel Light barrier Base plate...

...Complete radio system consisting of 1 transmitter + 1 receiver socket including timer for shutdown. Any number of additional transmitters possible.

Wholesale of radio receiver sets, transport carts, multi-purpose ladders, construction fittings, building elements, fire protection glasses, barriers, bollards, load securing.