polytetrafluoroethylene Germany

... is inherently flame-resistant. Thanks to its excellent chemical resistance, PTFE is ideally suited for use in the chemical industry. Additionally, this plastic is characterized by excellent insulation properties. Polytetrafluoroethylene is used in various applications, including mechanical engineering, transportation technology, electrical engineering, semiconductor technology, medical technology, and food technology. The material is used, for example, for valve seats, pump rotors, seals, roller coverings, sliding bearings, and strips.

...ELKALUB GLS 762/N0 is a fully synthetic grease designed for use in the food, beverage, and pharmaceutical industries. The grease is based on silicone oil and is thickened without the use of polytetrafluoroethylene (PTFE). This feature enhances the flow behavior in central lubrication systems and prevents blockages—especially in dosing valves and progressive distributors. ELKALUB GLS 762/N0 is...

... (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), polystyrene (PS), polyoxymethylene ((POM), polyvinyl chloride (PVC), polyethylene (PE), polytetrafluoroethylene (PTFE) OKS 2670 is suitable for use with the OKS Airspray system Also available as spray version OKS 2671 Density: (20 °C):0.78 g/ml...

... thermoplastics. Nevertheless, AGK, as a machining processor, can certainly work with these materials. AGK - Material "KU" Thermoplastic plastics with high wear resistance and low sliding friction are the high-performance plastics that complement our thermosetting materials. So you can obtain from us: Polyvinylidene fluoride (PVDF), Polyether ether ketone (PEEK), Polytetrafluoroethylene (PTFE (Teflon)), Polyphenylene sulfide (HPV PPS), Polyimide (PI), polyethylene (PE), PA (polyamide), PP (polypropylene), POM (polyoxymethylene, polyacetal), and metal -...

... base oils and a thickener made of polytetrafluoroethylene. They are used for the long-term lubrication of roller and plain bearings that are subject to high thermal loads. Castrol Braycote Inertox high-temperature greases are used under aggressive environmental conditions and are resistant to inorganic and organic acids and alkalis, even in vacuum systems and clean rooms where a low evaporation rate of the base oil is required. Product number:1854741 Container size:1 Product group:Industry...

...PTFE (Polytetrafluoroethylene) is considered a high-performance plastic, offering good temperature stability and very high chemical resistance. PTFE (Polytetrafluoroethylene) has one of the lowest coefficients of friction of all comparable plastics. Due to the very wide temperature stability of PTFE, its thermal properties can be described as "top-notch." Another characteristic is the extremely high durability of the material. Furthermore, seals made from PTFE require low surface pressure to achieve the desired leakage rate, as they are very adaptable yet tough.

With over 50 years of experience in PTFE processing, not many companies can offer you that! Our high level of manufacturing depth, starting from the compounding of raw materials through to the production of semi-finished products (hydraulic pressing and RAM extrusion) and machining on state-of-the-art CNC-controlled turning and milling centers, guarantees you products from a single source. Whether...

Here you will find a team of experienced specialists with over 30 years of professional experience. This makes us unbeatable in terms of consulting and service. We are always on par with the latest technology and new manufacturing technologies. We manufacture with state-of-the-art production and testing machines, which allows us to guarantee you a high level of quality, reliability, and performa...

... Rhine-Westphalia (NRW) for: surface coating with perfluoroethylene propylene (FEP), polytetrafluoroethylene (PTFE), non-stick coating, baking mold coating, industrial coating, antibacterial coating, sliding coating, special coating, custom solutions.

...Adopted is polytetrafluoroethylene (PTFE) for the body. Polytetrafluoroethylene (PTFE) body gives excellent resistance to chemicals. Automatic shutoff valves in both socket and plug prevent fluid outflow from lines on disconnection. No dissolution of metal ions from part in contact with liquid ensures excellent reliability. All components are cleaned, assembled, inspected and then packed in a...

...A high-quality insulation hose made of polytetrafluoroethylene (PTFE) with very high temperature resistance and chemical resistance. The PTFE insulation hose is an electrically insulating hose made of polytetrafluoroethylene (PTFE), a high-performance thermoplastic known for its excellent insulating properties. This PTFE insulation hose offers high temperature resistance and can withstand high...

... volume changes nor weathering or brittleness. This is a PTFE stainless steel double laminate. The stainless steel layer is protected by the PTFE. The material has many technical application areas. Composition: Polytetrafluoroethylene film, stainless steel, polytetrafluoroethylene film Format: Discs & Rolls Color: Natural Film thickness: Upon request Film type: PTFE/Stainless Steel/PTFE Country of origin: China Alloy: 316L...

... / Polytetrafluoroethylene-Perfluoropropylene (Teflon) Outer cover: Synthetic rubber blend, black, electrically conductive, resistance less than 10 to the power of 6 Ohms Reinforcements: High tear-resistant textile reinforcement and steel wire spiral...

The Hessian company Schüth has been manufacturing seals, stamped parts, and ventilation elements for various industries and customer groups for over 125 years. Together with its employees, the company, which has been part of the Stahlgruber Group since 2015, has managed to grow over decades and develop into a significant partner and supplier for industry and trade. Keywords such as experience, co...

Fluor-tech Kunststoffe GmbH is an expanding, flexibly oriented medium-sized company – specializing since 1984 in the development and production of application-specific products made from PTFE and other fluoropolymers. A team of dedicated employees, each with many years of experience in their respective fields, guarantees you personalized and competent support. In the processes of "Free Pressing"...

...Universal Thread Seal Tape LD made of 100% PTFE for all types of threads Dimensions: Width 12.7mm x Thickness 0.1mm x Length 10m Packaging unit = 10 rolls Material: PTFE (Polytetrafluoroethylene) = TEFLON/DuPont, = HOSTAFLON/Hoechst is - chemically resistant to all media with a pH value of 0 to 14, except for molten or dissolved alkali metals, elemental and gaseous fluorine at high temperature and high pressure, - temperature resistant from -240°C to -270°C (short-term up to -310°C), - physiologically harmless - taste-neutral / odorless up to -310°C.

...The O-ring made of polytetrafluoroethylene (PTFE) is a closed ring with a circular cross-section.

...The chemical compatibilization of Polyetheretherketone (PEEK) with Polytetrafluoroethylene (PTFE) results in a semi-crystalline thermoplastic compound with a homogeneous and processing-stable morphology. The compound containing 10 wt.% PTFEcg, 20 wt.% PTFEcg, or 30 wt.% PTFEcg (cg - chemically coupled) exhibits excellent tribomechanical properties. The thermal and chemical resistance matches that of the PEEK matrix material. The granulate can be processed under the processing conditions of the matrix material through extrusion or injection molding.

...PTFE Teflon Semi-finished Products | Sheets | Rods | Solid Bars | Pressed Parts | Blocks Polytetrafluoroethylene (PTFE) is a synthetic high-performance fluoropolymer made from tetrafluoroethylene.

... (Polyethylene), PA (Polyamide), POM (Polyacetal), PVC (Polyvinyl Chloride), PET (Polyethylene Terephthalate), PP (Polypropylene), or PVDF (Polyvinylidene Fluoride), as well as high-tech plastics ranging from PTFE (Polytetrafluoroethylene) to PEEK medical (Polyetheretherketone medical) and many more.

...Filter bags with microgreen coating Temperature range from -20 °C to +250 °C, briefly up to +280 °C Product features Made from the following materials: • Polypropylene (also modified) • Polyester • Polyacrylonitrile • Polyphenylene sulfide • Aramid • Polyimide • Polytetrafluoroethylene (PTFE) • (partly with IFA or EXAM certification) Length: 0 – 20m Design: • sewn • welded • sealed Applications Compressed air, pulse jet, vibration, flushing air...

Founded on January 1, 2005, HST GmbH Oberflächenschutz in Perfektion offers high-quality coatings in the fields of anti-stick, sliding, and corrosion protection coatings across Europe. No matter which of our coatings you need, we have the right solution for you. The goal of HST GmbH is to provide you with first-class service. If you have any questions about our company or our services, you can ...

... connection version: M12 connector Switching output version: PNP Switching function execution: NO contact Adjustment procedure: Manual adjustment Mechanical mounting condition for sensor: flush Active surface material of the sensor: Polytetrafluoroethylene (PTFE) Protection class (IP): IP67 Correction factor (wood): 0.6 Correction factor (glass): 0.6 Correction factor (oil): 0.5 Correction factor (PVC): 0.5 Dimensions: Regulation not defined Switching frequency: 500Hz Ambient temperature: -25 ... 70°C Supply voltage range Us c.CC: 10 ... 35V...

... PTFE inserts) Standard materials of the sliding plate with chambered PTFE inserts for welding: Unalloyed structural steels according to EN 10025-2 S235JR Other materials available upon request PTFE (Polytetrafluoroethylene) is a thermoplastic high-performance plastic, a polymer made of fluorine and carbon with a very low coefficient of friction. Due to its excellent non-stick properties, PTFE has outstanding sliding characteristics (very low coefficient of friction). PTFE has excellent UV and weather resistance, as well as high corrosion resistance. Temperature range of use... Country of origin: Germany...

...Reinforced Concrete DIN 4281 Specific Product Information: Shut-off Shaft System ACO Made of Reinforced Concrete DIN 4281 Design as Intermediate Flap Flap Actuation Manual Drive Shaft Cover Class D 400 Odor-tight bolted Pipeline made of Stainless Steel On request: Other connection nominal diameters Special design with different materials (FPM Fluoropolymer, Halar coating, and PTFE Polytetrafluoroethylene)...

...PA – PA 6 – PA 6G – POM – PET – PE – PC – PP – PEEK in all common colors available as semi-finished products in sheet and rod form. PA – Polyamide PC – Polycarbonate (Makrolon) PC – Polycarbonate (Makrolon) + UV stabilized PE – Polyethylene PEEK – Polyetheretherketone PETG – Polyethylene terephthalate PETP – Polyethylene terephthalate PP – Polypropylene PMMA – Polymethyl methacrylate PVC – Polyvinyl chloride PTFE – Polytetrafluoroethylene...

... quantity or minimum order value, which allows us to deliver individual seals or components as quickly as possible. Our offering of service, quality, and speed is particularly important and interesting for repair companies and technical dealers. Our products: • Flat seals • PTFE flat sealing tapes • Mechanical seals (GLRD) • Packing seals • Repairs of mechanical seals • Seals made of polytetrafluoroethylene (PTFE) • Seals made of pure graphite • Stamped seals • Seals • PTFE thread tape...

IDG-Dichtungstechnik GmbH positions itself as a technology center for innovative, high- and ultra-high-performance sealing technology. As a developer and manufacturer, IDG focuses its expertise on seals whose materials are primarily based on polytetrafluoroethylene (PTFE). Under the brand name MANOY, IDG designates all products that are constructed based on its own compounds. The IDG product...

... from polyamide (PA), polyoxymethylene (POM), polyvinylidene fluoride (PVDF), or polytetrafluoroethylene (PTFE). The outer cover material consists of polyamide (PA), polyurethane (PUR), or polyvinylidene fluoride (PVDF). To ensure great safety for our customers even at high pressures, the hoses are subject to high-quality standards, with many of them certified according to international standards such as EN 1829-2 or ISO 19880-5.

THE PROFESSIONAL IN THE EAST -Folding bellows -Folding bellows made of fiberglass fabric -Folding bellows made of polyester fabric -Folding bellows made of polytetrafluoroethylene (PTFE) -Chemical-resistant folding bellows -Heat-resistant folding bellows -Custom folding bellows -Rubber folding covers -Leather folding bellows -Slideway covers -Roller covers -Spring band spirals -Camera bellows...