valve application Germany

... handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option...

... satisfactory system. The material application can be done as a point, bead, or targeted using a specially manufactured applicator. If a surface application is required, the medium can also be sprayed using a spray valve.

... of the saw frame with a quick-release lever — Feed adjustment via a hydraulic flow control valve — Automatic adjustment of the saw frame position above the material to be cut — Frequency-controlled band saw drive (partially optional) — Exact cutting path Type: fixed installation Technology: band, miter Processed material: for steel, for plastic Application: for profiles, for pipes Additional features: automatic, horizontal, precision Additional features: with hydraulic vice...

... optimised results already in the planning phase. This is done by means of a CAD-based simulation which enables the very exact predicition of stream conditions. The performance opportunities of our heat exchangers are used at the best as a result of appropriate installed equipement for flow duct. We would be pleased to provide you with our knowledge also beyond the heat exchanger technology.     The precise project   In case of a plant for catalytic combustion, the connecting hood to the heat exchanger was  significantly shortened due to the assembly of a THERMO-AWT 3-Way Stop valve. After this ...

... been certified previously thus considerably reducing the efforts of developing, verifying and approving a safety application. The main controller's CODESYS environment and the EtherCAT link are used for programming. Function:functional safety PLC  Model:Control cabinet module  Field bus interfaces:EtherCAT / Safety over EtherCAT (FSoE)  Software:CODESYS version 3.5 SP8 or higher  Status indication:LEDs allocated to the point of termination  Dimensions (W x H x D):25 x 120 x 90 mm ...

... under protective gas. The advantages are: - Cost-effective soldering process for mass-produced parts - Flux-free soldering - The surfaces are metallically bright after soldering - High strength of the solder joint - High process reliability through documentation of production data Areas of application: - Automotive industry - Electrical industry - Hydraulics - Valve and apparatus construction - Medical technology - Mechanical engineering - Furniture industry...

... are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the... Working Pressure:max.250 bar min. 10 bar Stroke:under ISO 2768-1m ± 2mm Temperature:max. 80 °C min. -20 °C Piston Speed:max. 500 mm/s min. 1 mm/s Sealing System:PTFE...

...Stainless steel float hollow balls - with slotted seat for flat rod of the PVA PEKI float valve series. The use of different sizes, shapes and materials optimises the use of the PVA float valves in many applications. From the space-saving compact float made of high-quality HDPE plastic to the elaborate stainless steel float like this one with individual fastening options, we can offer the right solution for almost every application. Material Edelstahl:V2A/V4A Max. Temperature:120°C – 150°C...

... Advantages - Secure component and O-ring feeding - Process-safe assembly - Presence control with optical sensor - Short cycle time - High technical availability - Low energy consumption - Quick setup - High output - Short procurement time - Fast amortization - Secure investment - Widely proven in industry Application Areas The OA 700 assembly machine is used in all industries such as the valve and fitting industry, automotive, medical technology, household goods, electrical engineering, plastics industry, pneumatics, and hydraulics.

...With increasing demands on the efficiency in agriculture, precision farming is becoming more and more important. Precision farming stands for the targeted management of utilized agricultural land, e.g. the individual application of fertilizers and plant protection products depending on the position of the utilized land. To ensure the necessary communication between tractor, equipment and...

...Valve Technology Force range max. 5,000 N Stroke - mm Cover two differing force ranges: Tandem push type gas springs by ACE are maintenance-free and ready-to-install with two pressure tubes with different extension forces and progression curves. With this type of gas spring you cover the different force ranges between the start and end of an application. These force ranges are adjusted and...

... if necessary, but ceramic valve discs are also part of our product range. Various construction forms and geometries are possible. Whether as a cross or T-piece, with coupled valve discs or individually driven, we adapt to the installation situation and work closely with the customer during the design phase to find the optimal solution for each application case. We also manufacture components based on our customers' drawings. This includes, among other things, control cones or hoppers.

...Shut-off valve 1/4" G internal to internal ball valve "ECO-LINE" - PN25 with internal threads on both sides. Two-part with full passage. Technical Data Material housing: Nickel-plated brass Material ball: Chrome-plated brass Material seal: Teflon/NBR Temperature range: -20°C to max. +95°C Application area: Compressed air, oils, water...

... standards in terms of lifespan and reliability. Application Area - As a shut-off in municipal underground PE-HD gas supply lines for natural gas according to DVGW G260 Advantages - Low operating torque - With internal spindle thread - Safety through absolute tightness - Robust design - Metallic sealing system with long lifespan - Any flow direction - Piggable Nominal Diameter: DN 50 - 300 Nominal Pressure: PN 6 /16 Operating Temperature: -10°C to +70°C Media: gaseous...

...Pneumatically driven high-performance jetting valve for contactless micro-dosing of highly viscous media. The Liquidyn® P-Dot is designed for precise application, delivering exactly reproducible droplets.

...With the proportional dosing valve PDV from D+P, continuous as well as spot application of up to a volume of 12cm³ is possible.

... pure-grade PE — High wall thickness, heavy quality — Stackable — Can be accessed with a forklift or pallet truck — Resistant to most chemicals and cleaning agents — Standard equipped with a drain and plug — Fitted with a reinforcement strip Accessories: — 3/4" drain valve — Cover lid, lockable hinged lid...

... water, saturated steam, water-glycol mixture, compressed air. Application: heating systems, compressed air systems, and air conditioning, chemical industry, process engineering. Durability ensured by a spindle with a self-adjusting packing.

...The SAV Plus™ is a heavy-duty position control valve that maintains a valve's position based on a desired % output set point. It is designed to work in applications where the control of a process variable (PV) is accomplished using an independent sensor. Perfect for controlling Dew-point, Carbon Potential, etc. The SAV Plus™ incorporates a standard Waukee Flo-Meter scaled to the application...

... distinguished by a high reproducibility of the lift-off point. The electrical power consumption lies thereby in the lowest range of the Plate Armature Technology. The compact design of the valve provides a variety of assembly options for different areas of application. Orifice (DN):6 mm Flow rate:200 l/min @ 2 bar Pressure range : 0 – 6 bar Rated voltage:24 V Power consumption:max. 2.5 W...

...Manufacturing of solenoid valves for plant engineering, process technology, or filling technology RSG metal valves are the "ideal choice" in many areas. Whether in plant engineering, process technology, or filling technology. Depending on the application, the metal valves are available in different designs. In addition to the standard housing material brass, red brass, V2A or V4A stainless steel...

...Application The VD2 is designed to reface valve seats of the engines of trucks. heavy construction vehicles and small ships. Features The VD2 refaces the valve seat in a lathe-type facing action. The tool head includes two inclined slideways for refacing 30° and 45° valve seats. A single point turning tool is clamped to tool slide guided in the respective slideway. When the VD2 is rotated around...

...When operating pneumatic valves (diaphragm valves, etc.) special attention is placed on the protection of the control air system. The 5A compact safety valve reliably protects the control air system against media flowing back in case of leaks. The valve is automatic and therefore provides safety in the application. Opening Pressure A:0,7 bar Operating Pressure A:2 bar Flow A → C:0,6 m³/h (Air with 2 bar) Pressure Stage:PN6...

...GEMÜ ADA is a pneumatic, double-acting rotary actuator. It operates on the double piston principle and is suitable for installation on butterfly valves and ball valves. - ATEX version optionally available - Proven drive technology - Easy adjustment of end positions - Simple installation - Versatile application - Stroke limitation available (optional) - Robust design - SIL 3 certified - Diverse accessories Type: pneumatic Movement: rotary Technology: piston Configuration: double-acting Additional features: for butterfly valves, robust, ATEX, for spherical ball valves...

... Isolation and Bleed function each ball valve seals both at the upstream and downstream side. With the so-called „studded“-design, meaning a closed flange form, the valve has the length of a single standard valve and affords a compact and economic alternative for the application of multiple valves. The TBV comprises – like all Hartmann valves – a pure metal-to-metal sealing system between ball and seat ring. With this sealing system leakage rates A, respectively 0, can be fulfilled. Furthermore, it is characterized by an outstanding longevity and low maintenance requirements.

...Short execution (Throttle valve) - Adjustment screw with knurling - Whitworth pipe thread - VS sealing rings - Material: Nickel-plated Ms, black anodized Al, KST - Design: Cone throttle - Permissible medium: Air - Temperature range -10 to +70 °C - Operating pressure range 0.5 to 10 bar Mounting: Swivel fitting Material: Nickel-plated Ms, black anodized Al Properties: Throttle function Additional properties: Check valve Shape: Angle Application: Pneumatics...

...°C PA6 120°C PA12 120°C Application areas: Automotive, construction, and agricultural machinery in the area of venting for air filters or fuel systems. To ensure a secure connection, we manufacture corrugated pipes with integrated connection geometries (bayonet lock) according to customer requirements for venting or draining piping systems. This saves valuable weight and reduces potential leaks. The locking geometry allows for time-saving and user-friendly assembly and disassembly.

...Pipeline valves, as inline armature with venting and breather valve function - Application as inline armature with venting and breather valve function for vessels. Preferably used for installation in pipes.

...High operating pressures and extreme temperatures – wherever other fittings reach their physical limits, this series is the optimal solution. The double eccentric mounting of the disc, high-quality materials, and excellent workmanship ensure safety even under extreme operating conditions. Various sealing systems provide an optimal solution for each specific application. Nominal sizes::DN 50 - DN...

... to flush flange - Thermal overload protection for safety and durability - 4-way adjustable handle for individual comfort - Soft start and electronic overload indicator for smooth operation and information during overload - Adjustable water supply through integrated water valve for improved cooling and dust minimization. This electric wall cutter not only offers power but also precision and user-friendliness for professional applications in various construction projects.