spraying Germany

...Spray nozzle SD 20: numerous application and setting options The SD 20 includes an integrated control valve with which it is possible to quickly and simply control the spray and control air. It is possible to adjust the spray width manually. This model is primarily envisaged for flat spraying tasks; however, round spray application is also an option. It is possible to control the SD 20 pneumatically or electrically.

...The Grunitz Anti-Mold Spray is designed for the effective removal of mold, fungi, stains, algae, and moss on wallpapers, painted walls, masonry, concrete, wood, tile joints, etc. Effective against all known types of mold and house fungus. Low odor during application due to reduced pH value. The oxidizing effect is initiated by the spraying process; the product immediately adopts the pH value of...

...Better dosing with carbide! When processing abrasive media, such as when spraying fiberglass-reinforced plastics, the components used are subjected to extremely high stress. For such components, carbide is the suitable material due to its extraordinary durability. Especially in valve technology, pump construction, and fittings, as well as in measurement and control technology in general, the use of carbide components has proven itself over the years. We manufacture ready-to-use components for you that we can adapt to changing requirements at any time or further optimize together with you.

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

... thickness is between 10 μm and 25 μm, for specific requirements thicker layers are possible. For metric threated parts it is necessary to meet the tolerances according to ISO 965, to avoid the screw thread‘s agglutination and to keep the friction coefficients accordingly adjustable. In contrast to paints, where the danger infiltration is given, this phenomenon is prevented through the „sacrificing“ impact of zinc. In salt spray tests zinc lamella coatings achieve better results than typical galvanic zinc plating, which often only reaches 96 h to 200 h in salt spraying tests (usually according...

... workpiece via a spray frame.The washing plant is operated via a side switch box with electrical control. Before the washing process, the loading basket is loaded and driven into the rinsing chamber via a roller conveyor. The door is closed manually (optionally also automatically). The machine reaches an operating temperature of 40°C within just a few minutes. After a further 30 minutes, the maximum washing temperature of 70°C is reached. The motor-driven spraying gyro completely revolves around the parts to be washed.

...Beige, non-flammable high-temperature binder resistant to temperatures up to 800 °C for securing glass fabric onto the insulating material VM 17. Also suitable for impregnating and solidifying fiberglass mats. The binder is free from organic solvents and can be applied by brushing or spraying.

...Very narrow particle size distributions and excellent flowability characterize these spray powders (Thermal Spraying / Plasma Spraying).

...intake manifolds and exhaust gas recycling ventilators of all petrol and diesel engines. Usage Remove the throttle, insert the extension tube into Blast it!’s spray nozzle and shake the can well. Then spray onto dirty areas. Allow about 5 minutes for it to take effect and then wash the residue out by spraying again. If necessary, wipe over with a cloth, then re-attach the throttle. In the case of 6-cylinder motors, firstly scratch out the incrustation on the intake manifold with a screwdriver, then clean with Blast it!. Batch quantity/Packaging units Batch quantity: 200ml spray...

...Automatic desinfectant dispenser For wall mounting Infrared auto-sensing 0-12 cm sensing range 25ms response time battery working time 1000h (battery not included) liquid capacity 1000ml spraying volume 1.2ml ...

...AUTOSOL® AGRICULTURAL CLEANER - ACID Cleaning concentrate based on inorganic acids and surfactants, used to remove stubborn mineral soiling from agricultural vehicles and machinery. Cleans agricultural machinery, spraying equipment, tanks, agitators, filters, etc. Removes easily mineral dirt, cement, lime and also rust and corrosion Very efficient and cost effective Save on glass surfaces Compliant to REGULATION (EC) No 648/2004 of 31.03.2004 on detergents Item number:22 000204...

...When high demands are placed on the corrosion resistance of components, thermal spraying is used. This applies, for example, to components from the offshore sector and the automotive industry.

...In plasma spraying, the powdered spray additive is melted by a plasma jet inside or outside the spray gun and then propelled onto the material surface.

* Worldwide Service * Own sales companies and exclusive representatives * Dense field service organization * Manufacturing sites with state-of-the-art production facilities, * Testing facilities and simulation techniques * Production sites in 9 countries * 2 production sites in Germany * First-class customer service * Etc.

...Grillo zinc powder is made from high-purity fine zinc. Properties Grillo zinc powder is made from high-purity fine zinc. Application Grillo zinc powder is used in thermal spraying for corrosion protection and in the chemical industry. Zinc-aluminum alloy powders are also excellent for soldering aluminum components. Areas of Application Chemical products Corrosion protection Solder joints...

...We offer efficient solutions for demanding and durable surfaces. Low-pressure plasma spraying allows for a significant increase in adhesion tensile strength, density, and purity of the coatings compared to atmospheric plasma spraying. Essentially, a low-pressure plasma system consists of the following components: Plasma spray gun and control cabinet (plasma gases, carrier gas, powder feed, current, voltage, cooling water, etc.), DC power supply, HF plasma ignition, powder feeder, vacuum tank with movement system for workpiece and plasma gun, filtration systems, and pump station.

... conductive materials (metal coatings) can be processed. Due to the very high deposition rates, the arc spraying process is particularly suitable for large coating areas and thick layers. Flame temperature: 4000 °C Particle velocity: 150 m/s Powder feed rate: 15 – 3300 g / min...

...The flame spraying process is well-suited for the repair of worn or insufficiently machined parts.

DIROJET GmbH is a dynamic company with decades of knowledge in technology and markets, based in Verl, East Westphalia. We specialize as a manufacturer in the production of our own products and as an independent specialist dealer in the distribution and service of high-quality products from renowned German and international manufacturers in high and ultra-high pressure technology, vacuum technology...

For over 25 years, we have been active in the field of tool standards for mold making and stamping technology. Fast disposition, high product availability through our well-stocked warehouse, reliable delivery, and the highest quality standards ultimately lead to the success of our customers in tool and mold making. In 2010, HSB LAMBERT GmbH became HSB NORMALIEN GmbH, thereby completing the range ...

Today, Walter Widmann GmbH is a family-owned business now in its 3rd generation. Our grandfather, Walter Widmann, founded the metal processing company in the early 1930s. In the 1950s, the core business was contract turning, primarily of bearing bushes and similar parts. However, by the early 1960s, the first experiences in plastic injection molding technology were gained on the legendary ARBURG...

We are a medium-sized family business with over 20 years of experience in the production of infrared heaters and gas burners, as well as the design of infrared systems. We specialize in developing and offering customized solutions. We place great importance on close collaboration with our customers to achieve optimal solutions and fully leverage the advantages of our infrared technology. This foc...

METZEN Industries is your premium provider for solving complex problems in industrial plant and machinery construction. We deliver results – from analysis to implementation. As a full-service provider, our teams of professional and experienced senior engineers support your projects in all phases. This ensures the continuous improvement of your plant performance, making it more efficient, sustainab...

MOC has been specializing in the development and manufacturing of cleaning systems for over 50 years. MOC is now one of the leading manufacturers of cleaning systems in Germany. We offer a wide range of features, including ultrasonic cleaning, recirculation, and coalescence separators. Our product range includes various types of cleaning systems such as immersion cleaning systems, spray washing sy...

Material handling sites, recycling yards, waste incineration, construction sites, demolition, deconstruction, earthworks, quarries, mines, steel and cement plants, as well as tunnel works are typical areas of application for stationary or mobile dust suppression. The company NEBOLEX Umwelttechnik GmbH, based in Kirchberg in the Hunsrück region of Rhineland-Palatinate, has been active in dust bind...

..."Made in Germany" ABAC HVLP Paint Spraying System SG 2000: Motor Blower ABAC SG 2000, Spray Gun ABAC PN 1A, Air Hose 6 m., Dipper for Viscosity Checks, 2 Spare Intake Filters. Scope of Supply: Adjustable low-pressure motor blower SG 2000 with continuous pressure regulation and 5 m connecting cable. Spray gun PN 1A with intermittent air supply, with 3 nozzles 1 - 1,5 - 2 mm and 0,7 I...

Since 1981, we have been designing and building devices, machines, and special machines from the idea to commissioning. Since 2006, we have been operating in the 2nd generation under "Daub Maschinenbau GmbH". Our company produces the powerful and durable systems and machines that bakers need for the efficient production of their delicious pretzels. The pretzel, as an affordable and wholesome snac...

Producing good products, performance, reliability, and striving for better solutions are the core elements of the MAUS® concept... Reliability is nowhere more important than in road construction. That’s why MAUS employs state-of-the-art computer technology in order processing, maintains a comprehensive spare parts inventory, and ensures that the required equipment and spare parts arrive on time...

Since 1969, Mahler has secured its place as a specialist in high-quality industrial coatings. In its second generation, the company continues to focus on series production with specialized surface spray machines, precise manual coating, and rotary machines for special parts. These coating processes have been in use for many years. Whether metal, plastic, or glass, your products receive a coating ...

SUGINO is a machinery manufacturer in Japan. We offer some of the finest manufacturing equipment available on the market today. The history of SUGINO dates back to 1936. We are pleased to provide reliable, high-quality products such as high-pressure water jet equipment, wet jet dispersers, laboratory dry mills, biomass nanofibers, and precision machines and tools. We develop our own ideas, creat...