pressure company Germany

... with maximum concentricity precision and optimal hardness regarding safety against fracture risks and longevity. Our dies are exclusively equipped with holes made by a gun drill and have been started. The result is precise and smooth pressure channels that you can put into operation immediately and without startup. Controlled and tested. All dies are checked for their dimensions and for their concentricity precision during final inspection.

...Piston compressors are ideal for intermittent operation. They are available as oil-lubricated or oil-free. High-pressure compressors are also available. Also known as: Reciprocating compressor...

... control and seamless system integration — System equipment and service from a single source Performance: 350 to 7,500 kg/h Safety pressure: up to 24 bar Max. temperature: up to 224 °C Energy carrier: Electricity (supply voltage 380/400/690 V)...

... various designs. Typically, the edge is blunt. Depending on the application, there are single-sided and double-sided edges. Notched versions of a crushing knife are also part of our repertoire. Due to our many years of experience, we have been able to continuously perfect our knives in this area. As a result, you receive a high-quality knife with the properties that suit your company. Benefit from our experience in the field of crushing knives. We manufacture your circular knives according to...

...The bags are made of polyester/polyethylene. The bags can be reused multiple times thanks to the built-in pressure seal. The inner layer is made of conductive polyethylene, while the outer layer is aluminum-coated, conductive polyester, with a total thickness of approximately 77 µm. Upon request, these bags can also be printed with the company logo and other customizations. (Minimum order quantity: 10,000 bags) Custom designs are also possible.

... technology As a contract screening company active for many years we know what the priorities are for our customers. For these needs, we have self-developed our contract screening plants from Planoscreen and Planodry types. With these advanced contract screening plants not only can we screen contaminate-free , we can at the same time dry the screened product under a nitrogen atmosphere or a pressure cascade. In addition to the machines and process engineering plants that we have developed we also screen on systems from other manufacturers. For this completely different screening procedures are used d...

...ENHA’s Ranger helmets reflect the company’s indepth understanding of customer needs and its ability to address demand through product innovation. They are awardwinning, exceed the demands of EN 397 and include innovative features that are revolutionising the head protection market. Such features include the Crashbox as well as patented oval shaped slots on the side of the helmet which refrain from cracking should permanent pressure be applied from the personal protective equipment attached. ProductType:Safety Helmet Material:Hi-tech blend of ABS / Polycarbonate with UV blocker...

...- Consulting on the introduction and implementation of a measurement equipment management system according to DIN 32937. - Consulting and creation of work instructions/process descriptions as well as calibration instructions in the field of measurement equipment management. - Training employees in the handling of measurement and testing equipment. - Taking on measurement tasks on-site for the measurement quantities of length (e.g., component measurement), pressure (e.g., manometers), torque (e.g., torque wrenches, torque screw tools), and force (e.g., industrial scales).

...Our motto: The harder, the better! We specialize in the production of containers, pressure vessels, and plant components in both standard and stainless steel, which we can deliver from simple designs to pharmaceutical quality. Here, we hold all necessary approvals, such as the Pressure Equipment Directive 2014/68/EU, for the welding specialist company AD2000 HP0 and DIN EN ISO 3834-3. Our...

...Price 24,300.00 € Condition Company HAVER NIAGARA GmbH Location Münster, Germany Your Process Processing Category Minerals Package - Year built 2014 Contact person Bernward Wellerdiek B.Wellerdiek@haverniagara.com +49 (0)251 9793 114...

...without causing leaks or tool deflections. This challenge has been addressed with a clamping system that fundamentally differs from conventional pressing technology. The advantage lies in a compact design, which significantly reduces investment costs. This design allows for ground-level installation; thus, it ensures a substantial reduction in setup costs and high flexibility. The hydroforming machine we developed is completely manufactured in our company. The...

... disposal, without any limitations. Development, design, and products that are unmatched in terms of efficiency and reliability: Pressure relief valves - Check valves - Flow dividers - Throttle valves - Shut-off valves - Rotary unions - Directional control valves - Solenoid valves - Hose reels - Hose cable reels - Swivel connections...

... find the right support in the area of piping and apparatus construction that fits not only your project but also your vision. From the very beginning, our experienced and technically skilled project managers are available to provide advice. Due to the close connection, information from the technical office goes directly to production. Thanks to the interdisciplinary know-how and the extensive manufacturing depth in our company, we enable you to have a solution tailored to your needs.

... mountable remote control with a 5 m connection cable. Application area: Markets, self-service stores, large-scale catering, company canteens, bakeries, butcher shops, and social institutions (hospitals, nursing homes, senior homes, schools) or for the...

...For over a decade, the PEM press-in technology has proven itself in our company. In 2001, we acquired a press machine for threaded bolts/threaded nuts and other PEM press-in fasteners. With the PEM press (pneumatic press), threaded bolts/threaded nuts are pressed into pre-drilled holes or blind holes using a die and counter-die under the pressure of several tons of force. This relatively new yet...

...The company Kluge Air Filters offers you a new, innovative V-bag design. V-Filter Bag The company Kluge Air Filters offers you a new, innovative V-bag design. A reduction in pressure loss is achieved through the optimized shape of welded filter bags with integrated zigzag spacers between the flow-through filter layers: The distances of the zigzag band are continuously reduced in the direction...

... pipelines is carried out in accordance with the respective regulations. Tapping into pipelines (gas, cold or hot water) under operating pressure is an additional service that we can offer in this area of activity.

... durability and cost efficiency. The base material for ISO-LEN® WBS is ultra-high molecular weight low-pressure polyethylene (PE-UHMW). ISO-LEN® has been installed, for instance, in the lock gates in Wilhelmshaven and Münster, in the Oosterscheldekering project in the Netherlands, as well as in numerous construction projects in the Kiel Canal.

... distributor - Pressure reducer station - Clarification valve - Steam dryer - Condensate elevating system - Steam trap - Interior lighting of the container - Insulated pipe installation in the container - Emergency-off switch - Steel door or uPVC door - High-quality stainless steel wall with insulation - Outside coating as required The installation and commissioning of the container plant at the customer is on request either carried out completely or only partially (if an external installation company is used) by our customer service.

... degrees, you have full access to the storage space. Stylish and weather-resistant design made from robust aluminum checker plate or powder-coated steel sheet (various RAL colors available). Advantages of the Jobbox®: Security against theft with an integrated lock Preservation of your tools' value Order and cleanliness on the loading area Weather-resistant Representation of your company...

...connecting other devices, such as needle shut-off control and pressure measurement systems, is possible via the standard Ethernet connection. The VARIO with microcontroller control meets the highest demands for process safety in your plastic manufacturing while remaining as small and handy as possible. Another step towards the future is the networking of all hot runner controllers connected to a central tool server in your company network, or via OPC/UA.

...Tank container: 20-foot steel box container with integrated 25,700-liter polyethylene tank (wall thickness 1cm). Only for non-hazardous products (water, oils, alcohol, ...), not for ADR substances. Temperature down to -40 degrees Celsius. 1. Condition: new, unused, with valid CSC plate 2. Volume: 25,700 liters 3. Decompression valve 4. Working pressure: 7 Bar 5. Spare parts included: decompression valve, outlet valve, manhole cover 6. Desired color included 7. Company logo included 8. Tank removable 9. Available for pre-order...

... measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included Display:color LCD, backlit Alarm:acoustically, optically measuring range:0,1mbar - 5 bar 0,1 - 10 bar Operating Temperature:-20° C to 40° C Protection class: IP 54 Power supply:battery, rechargeable battery, 4 x AA Operating Time:more than 12 hours of continuous use Housing:plastic with shock protection Interface:serial USB, Bluetooth, IR...

...Rack & pinion jack with flange, for pulling and pushing load, capacity 1.5 - 5 t - The company haacon hebetechnik gmbh expands its standard range of rack jacks with flanges for wall mounting. The standard drive mode is a self-locking safety crank (SiFeKu), which holds the load under tension and pressure in any desired position. The jack can be installed in any mounting position. The jacks are...

... combined expert knowledge of both fields and their interactions ensures you the best possible advice. From consultation to maintenance. When designing and calculating new refrigeration systems, there is much to consider: operating pressure, environmental conditions, inlet temperatures… The solution is our individual on-site consultation. This way, our specialists can assess all factors directly, prepare the optimal offer for you, and install the system accordingly.

...Pipe fittings, adapters, and connectors for pure fluid systems We are a modern company that has been specializing in the distribution of high-quality piping components for instrumentation in high-pressure, temperature, and vacuum applications since 2003. Our quality standards are the highest priority of our business. Only in this way can we identify with every product and service we offer. Our products are used worldwide across a variety of industries, including petrochemical, semiconductor, energy, food and biotechnology, defense, paper and pulp, as well as mining.

...and has since been a leader in equipping renowned OEMs in the automotive industry. Higher emission targets demand more efficient diesel engines. This is achieved through increasingly optimized combustion processes, which in turn require significantly higher pressures in the common rail system. Poppe + Potthoff has developed solutions that meet even the highest pressure requirements.

...Our experienced service team is the heart of the company and the foundation for continuous success. We take our responsibility to the environment seriously and place great importance on eco-friendly and sustainable services. With us, you as a customer are at the center. Therefore, we offer you a fast and transparent service. Your satisfaction and trust are important to us.

...This oxygen apparatus SÖHNGEN is suitable for every application purpose of First Aid: shipping For patient care at home or underway For medical and dental practice In ambulance transport and emergency services For company doctors and fire department The device consists of: Oxygen cylinder (volume 1 or 2 litre) Adjustable pressure regulator Breathing mask with saving bag Oxygen connection tube...

... request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid...