open steel Germany

...e.g.: tomato paste, honey, fats, icing, mascara, lip gloss, creams, Vaseline®, ointments, gels, and much more. - pressure-regulated or level-controlled feeding of products to filling machines or mixing processes Barrel sizes: 50 to 200 liters Barrel heights: up to 1000 mm Pumping quantities: up to 90 l/min Including: food-grade hose 3 m, open end Air pressure: 6 bar required Product-contacting stainless steel parts: 1.4404 / 1.4571...

... optics, they can be used in environments with temperatures up to 500°C. An optional open-air device makes the sensors insensitive to contamination of the optics. The detectors are used, among other things, for the detection of steel slabs or hot rolled wire, as well as for non-contact temperature control of malt barley in germination tanks.

...Side flexing and spiral belts Pitch 25 mm (0.98 in) Design characteristics Suitable for both straight and radius conveying up to 45 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, fewer belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pins...

... event of a leak or other hazardous situation. Bellows Shut-off Valve Invest in the longevity of your industrial facility with leak-free, environmentally friendly industrial standard bellows valves from Fergo. We offer the bellows shut-off valve in housing materials such as spheroidal graphite, gray cast iron, and steel. They are available in standard pressure ratings...

... pressure: - Inline filter: max. 40 bar Seal materials: - Inline filter: FPM, FFPM, EPDM Materials: stainless steel Internal volume: - Inline filter: 200 ml Measurements (ø x H): Ø 44 x 106 mm Inline filter: Ø 80 x 173 mm Fluid connection: cylindrical internal thread G 1/2" Mesh size: 25 µm Filter area: 400 cm² Remarks: * depending on seal material...

...The arcotest® Plasma Set includes the piezobrush® PZ3 plasma hand device for manual surface treatment with atmospheric pressure plasma and an arcotest® OPEN 4-piece set consisting of 4 test pens of your choice, each 5 ml. Additionally, the set contains two different modules. The Standard module is designed for the treatment of non-conductive materials such as plastic. In contrast, the Nearfield module is used for the treatment of conductive materials like stainless steel or CFRP.

...Unheated, round for plates, saucers and menu plates. Design: Frame structure made of chrome nickel steel, open, to be built-in in counters and cupboard substructures. Addition and removal of tension springs can regulate the tension to match the load and to ensure a constant serving level. Capacity: approx. 50 plates depending on kind of crockery. Stacking height: approx. 635 mm, max. loading approx. 50 kg. ...

... steel extras: electrostatically discharging, other sizes, other colors on request Alternative: see "Combi Hinges" with locking lever ; available in plastic PA glass-fibre reinforced or zinc die-cast Translated with www.DeepL.com/Translator (free version)...

...Your business card: The mobile orbital workstation — Integrated power supply for auxiliary devices: 5 x 230 V, 10 A (not suitable for power sources!) — 2 swivel casters with Ø 160 mm and brake — 2 casters with Ø 280 mm — Removable bottle holder with securing chain above the center of gravity of the bottle — High-quality powder coating — Stable work surface made of stainless steel, angled ends — Surface for the residual oxygen measuring device — Housing for the vice with clamping prism — Open welding clamp holder — Holder for the handheld hose pack — Surface for the inverter, cooling device, etc.

...Execution: Blank, galvanized*, stainless steel, plastic-coated. Grid width: up to 2,000 mm Grid length: up to 3,000 mm Open and closed edge meshes available * There are three different galvanizing options: • hot-dip galvanized in one piece • made from pre-galvanized wires • electro-galvanized...

... structure allows easy access for cleaning, handling, and maintenance tasks; furthermore, an automatic belt control ensures optimal tension and guidance of the belts. ►Durable construction: The systematic use of stainless steel not only provides the belt press with a high hygienic standard but also greater resistance and durability. ►Flottweg service: Flottweg assists you at all times with many years of experience and the corresponding technical knowledge. Key features: Roller with L profile and pressure Automation: Automatic belt control Construction materials: Stainless steel...

...The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate Nominal voltage:24 V Duty cycle:100 % Power consumption:1.5 W Holding force:490 N Design:with steel base plate  Connection:terminal clamp ...

...We provide a wide range of precise high valuable accuracy classified linear stages, open or closed frame XY stages, micropositioning elements and rotary or lift tables. Closed loop operation is supported by using optional steel or glas linear scales or rotary encoders. Standard stands in grey iron cast or granite are available additionally. The positioning systems can be driven by high resolution 1-, 2- or 3-axis motion controllers with joystick and RS232/USB/LAN interface.

...• Reinforced shape • With long, flat jaws • Serrated gripping surfaces • With open joint and stable handle • Plastic-coated handle • Made of tool steel, forged, oil-hardened Length in millimeters: 240 Weight in grams: 450...

... agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.

... properties. Application Aral multi-purpose grease F can be used in highly stressed pin joints, journal bearings, on fifth wheel plates on commercial vehicles, in water or dirt-polluted environments such as in the steel or mining sector, on open sprockets in transmissions or construction machinery.Specifications DIN - 51502 KPF2K-30 Product number:1507932 Container size:18 Product group:Fats in general...

...PLACOLOCK® Rotating Bolt Lock. Universal model, opens and closes clockwise or counterclockwise. Key removal possible in both open and closed positions (180° rotating tongue) or only in the closed position (90° rotating tongue). 2 keys included. STANDARD MATERIAL Tongue and screw: Galvanized steel Housing: Zinc die-cast, black powder-coated Lock cylinder: Zinc die-cast, cap made of stainless steel 304 Nut: Zinc die-cast, galvanized STANDARD IP54...

...Folding flap for complete removal Reinforced feet Extended bolt Safety clamp at the bottom (left or right) open Lower edge 20 mm height Coating RAL 7030 (gray) Weight: 58 kg Country of origin: Germany Dimensions: 1200 x 800 x 570...

... completion. The final splice will be made on site. The storage and installation instructions as well as the necessary adhesives are included with each shipment. Pre-assembled endless units are complete with appropriate steel components which may be in several parts depending on the size. KOREMA®’s “on-site service” is available for site supervision.

...Working Area Sets blind rivet nuts with left-hand threads from M3 up to M10 of all materials as well as M12 in aluminum and steel Technical Data Weight: 2.4 kg Setting stroke, adjustable, max: 10mm Setting force, adjustable, max: 22 kN at 6 bar Operating pressure: 5-7 bar Hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 liters per setting process (depends on the nut size) Scope of Delivery 2 double open-end wrenches SW 24/27 1 hex screwdriver SW 4 1 refill bottle with hydraulic oil 100 ml 1 oil refill container Operating manual with spare parts list...

...— Sensors in Niro housing 1.4305 for flush and non-flush installation — High switching frequencies up to 1000 Hz — Fully encapsulated versions with protection class IP67 — Temperature range: -25°C to +70°C — Switching distances: 1 mm to 2 mm — Cable/connector versions — 10 – 36 V DC — PNP / NPN versions — Normally closed / Normally open versions — Function indicators — Short-circuit proof versions — Versions with IO-Link Technology: inductive Shape: cylindrical M8 Protection class: IP67 Additional features: stainless steel...

... pressure measurement in open tanks Electronic differential pressure measurement in closed vessels Advantages: Ceramic capacitive measuring cell with high overload and vacuum resistance Flush mounting and additional protection against abrasive products Resistant to thermal shocks, operating up to +150°C Robust housing made of plastic and aluminum, or stainless steel (IP69k) Use in hazardous areas and...

... capability. Versa-Link™ is approved by the United States Department of Agriculture (USDA) and is particularly recommended for frying, cooking, coating, and cooling processes. Tape width (mm): 9.5 - 12.7 Max tape width range (mm): 150 - 3810 Available materials: Wear Resistant Stainless Steel...

...providing both stability and security. A lockable door handle with a cylinder lock protects your batteries from unauthorized access. Optimized Space Utilization: 11 special mounting rails are provided for the batteries, maximizing space usage. Flexible Door Hinge: The cabinet doors can be hinged on either the right or left side and open at least 120°, allowing for easy access. Product Number:IVG202407004 Manufacturer:IVG Energy Solutions...

... ) Extension distance 700 mm:max. 0.3 m/s ( 11.81 in/s ) All systems are lubricated for life:All systems are lubricated for life Rail material:hot-dipped zinc-plated steel Ball cage material:zinc-plated steel or plastic Ball material:hardened carbon steel...

...Open Awning Basic Most Selected Additional Images Open Support Tube Awning Permissible Dimensions: maximum width 700cm (minimum 200cm), maximum projection 400cm (at a width of 650cm) More Information Product Features Awning Basic: Long Profile: Aluminum, powder-coated or anodized (extruded) Fabric Roller: Steel (hot-dip galvanized) Console Tube: Steel (hot-dip galvanized) powder-coated Assembly...

...Centrifugal Pumps Made of Stainless Steel in Block Design Single-stage and two-stage versions for a variety of applications Single-stage centrifugal pump made of stainless steel 1.4404 in block design with threaded connection and open impeller for the transport of slightly aggressive media with abrasive substances, version COF with free shaft end. Technical Data Flow rate: up to 54 m³/h...

... is used. The filter cartridges are regenerable and can be cleaned using various methods (manually, with high pressure, in ultrasonic or acid baths). They are particularly suitable for high temperatures, high viscosities, or corrosive media. Stainless steel filter candles are delivered open on both sides or with standard connection adapters. Approval: FDA, EU1935 ATEX: optional...

...Warp and weft threads processed at a 45-degree angle to the disc circumference. Irregular, open-folded. Number of fabric layers depending on fabric thickness and strength. Core made of hard cardboard. Also available with steel claws and interchangeable centering discs. Dimensions: • Diameter 150 - 600 mm • Widths from 16 to 18 mm • Any drilling possible...

...Stainless steel ball valves with threaded ends, welded ends, or flange connections. Available in 1-piece, 2-piece, or 3-piece designs with reduced or full bore. For example, a 2-piece flange ball valve according to DIN 3202-F4/EN 558-1 in stainless steel 1.4408 (AISI 316), PN 40 with full bore. Available in sizes DN15 to DN100. The ball valve can be opened or closed using a hand lever. The hand lever is rubber-coated and can be locked (in either the fully open or closed position). Suitable for pressure ranges up to 40 bar (temperature dependent).