gearbox motor Germany

...Diverse and universal motor adaptations, connections, interfaces, and mountings for our transmissions...

...Pre-stage and output stage in version K Input side with motor flange...

... very compact design high tilting stiffness low backlash high efficiency high torsional stiffness low moment of inertia high dynamics integer gear ratios output side similar to DIN ES ISO 9409 honed gearing input rotation direction = output rotation direction lifetime lubrication easy motor mounting any installation position variable connection dimensions...

...The locally manufactured, ready-to-install gearheads already come with an integrated drive pinion and a motor flange for all common motor types. Applications of the RH-N gearheads with solid shaft: Handling, modern turntables, packaging technology, machine tool construction, medical technology.

...Screw, bevel gear, and worm gear drives With DC or BLDC motor From 2W to 600W, 6 to 48VDC Ø32 to Ø94mm Catalog motors as well as custom designs.

...Simple lifting device, load range 2.5 - 10 t, closed gearbox with integrated anti-reverse mechanism, suitable for continuous motor operation and control operation. Lifting devices for opening and closing sluices, trench and pond barriers. haacon manufactures simple lifting devices for manual operation as well as lifting devices with automatic control drive and high travel speeds. Each model can be individually adapted to local conditions using a modular system. We also supply ready-to-operate controls. Steel: Steel...

...Bevel gear motors ensure a high overall efficiency of the drive solution, especially when combined with frequency converters. The BK gear motor, an angular gear motor with the highest reliability, efficiency, and cost-effectiveness, sets new standards. It offers unparalleled features, including hollow shafts available in the smallest sizes.

... of electricity must be guaranteed. Gensets ensure the power supply in any situation, even under extreme conditions. Our genset gearboxes are connected between the motor and the generator, so that a frequency adjustment for the required power grid is achieved. It is possible to adjust the frequency from 50Hz to 60Hz as well as from 60Hz to 50Hz. The speed transmission is highly efficient, as the...

...DC motor with planetary gearbox, operating voltage range: 9V - 42V, gear ratio 249 - 809, stages 4, rated torque 45 Ncm – 65 Ncm, diameter: 22 mm, length:...

ABM Greiffenberger Drive Technology GmbH is one of the internationally leading system providers of sophisticated, high-performance drive solutions for machines, systems, and mobile devices. Founded in 1927, the company, based in Marktredwitz in Upper Franconia, has been part of the Senata Group since October 1, 2016. The Senata Group is a family-owned medium-sized business with an annual turnover ...

... externally accessible grease nipples for convenient, centralized lubrication, provide the demanding user with the assurance of a complete drive package with linear axis, gearbox, and motor as a system solution from a single source. With spindle, timing belt, and linear motor, the HRM series offers three drive variants, covering all applications where speed-optimized movement of medium to large masses and forces with a smooth motion sequence, as well as highly precise positioning, are essential.

...Planetary gear stage of the drum motor (For viewing only - not sold separately)...

...Features: From 1,000 Nm to 3 MNm. Modular design. Custom configurations. Ground gears (bevel gears and planetary gears) Solutions and general features and benefits: ◾Extensive range of planetary and angular planetary gears ◾Design suitable for shaft and housing rotation ◾Extended gear ratio range ◾Improved bearing lifespan ◾Electric and hydraulic motor adapters ◾Highly reliable and shock-absorbing design ◾Reduced weights ◾Enhanced operational safety ◾User-friendly ◾Reduced maintenance intervals ◾Maintenance-friendly ◾Global product and service support...

...Fully assembled drive units including motor with motor worms or motor pinions, typically with multiple gear stages in the designs. All common motor types are used (including DC, AC, stepper motors, BLDC, shaded pole motors, reluctance motors).

Special Motors - Made in Germany For 50 years, we have been producing durable and customized drive solutions. Founded in 1970 as SSB Antriebstechnik, we continuously deliver quality "Made in Germany. Made in Salzbergen": tailored to your individual requirements, in quantities from 1 to 1,000, and – thanks to high productivity – at a very good price-performance ratio. We are recognized specialists...

Full-service for maintenance, repair, and servicing of electric drive systems: • Electric motors • DC motors • AC motors • Three-phase motors • Gear motors • Servo motors • Drum motors • Underwater motors • Fan motors • Explosion-proof motors • Frequency converters • Switching and control systems • Generators • Transformers • Pumps • Flow accelerators • Agitators • Compressors • Power tools Works...

... smoothness. The worm wheel shaft is supported on both sides. The gear components made of bronze or steel, along with grease lubrication, ensure a long service life at the specified nominal torques. Spirotec gearboxes (STG) are gearboxes with a right-angle output. The centerpiece of the STG series is the spiral-toothed wheel set. Bevel gears are distinguished by a right-angle output without any axial offset. They are recommended for particularly low installation conditions, as the gearboxes are arranged concentrically to the motor.

... rated at class 180 (H) and utilization in class 155 (F) - smooth shaft end — option for keyway - modular system allows for quick implementation of mechanical adjustments - a wide range of options available (holding brake, gearbox attachment, other measuring systems, winding variants, electronic nameplate, etc.)...

... addition to the flexibility of being able to pair any motor with any gearbox, special attention has been paid to the splash-proof design. All AC motors are standardly built to IP66. Special seals at the A and B bearings protect the motor from dust and water ingress, which applies to both versions with and without a fan. The DC motors are available in both IP20 and IP66 configurations.

...). The mounting of the devices on the spindle is done via a hollow shaft and does not require an additional coupling. The mounting of the gearbox can be oriented as desired to create the most suitable geometry for the available space. No additional transmissions or angular connectors are needed. Nominal torque / Nominal speed: 2 .. 8 Nm / 200 .. 50 rpm Stroke: 977 .. 4026 revolutions Protection...

...In the development of the new two-handed orbital sander with gearbox, special emphasis was placed on operator comfort, durability, and versatility. The sanders provide excellent finishes on wood and composite materials, as well as on hard surfaces, fiberglass, metal, and stone. Double output bearings, the cylinder made of hardened alloy steel, and the 8-blade motor ensure durability. The...

...With easyE-line, you get an in-line actuator with a particularly slim design. The linear arrangement of the motor, gearbox, and spindle results in a very compact format for installation. With outer diameters of 35, 50, and 60mm, the actuator fits into almost any application. And it can handle forces of up to 10,000N (easyE-60). What the actuator needs to do is managed by the corresponding control system. Whether it's plug-and-play or integration into your PLC, synchronous adjustment of multiple cylinders, or mobile battery operation - you can find all of this in the easyE-line program.

... selectable sealing system - Compatible with RVT stirrer shafts and stirring elements Application area - Elastic coupling to relieve gearbox or motor - Various sealing options such as mechanical seal, lip seal, packing seal, gap seal, etc. - Nominal diameter flanges according to DIN - Frequency converter operation possible - Compliant with ATEX 2014/34/EU including Zone 0 Advantages - Modular design, thus flexibly adaptable - Versatile application...

... CNC Machine: - Machine bed made of UHPC concrete - Wet cell with flood cooling - Linear axes on precision profile rails - Heidenhain® TNC 640 control - Automatic pneumatic tool change system HSK-E 25 with double-arm tool changer - 20-fold turret magazine 5-Axis CNC Machine: - Swivel axis (B) - Cycloidal gearbox - Rotary axis (A or C) Torque motor STRUCTURE - Portal: Mobile, Table: Fixed POPULAR MATERIALS: - Steel / Stainless Steel - Titanium - Graphite - Copper - Brass - Aluminum - Ceramic - Special materials...

...[Figure 1] Type 310 Electronics, version "FW" with jet mixing head [Figure 2] Type 550 Electronics, version "WL" with jet mixing head [Figure 3] Type Pneumatics Ex, version "WL" Absolutely explosion-proof The hand-held quick mixer TURBINE is a highly efficient, portable device for stirring and mixing all liquid goods. The various motor types, available in both alternating current gearbox versions...

... dosing, discharging, or sample taking, all product-contacting components can be made of plastic or stainless steel. The rotary valve can also be operated via a frequency converter for dosing. Designed according to the Machinery Directive 2006/42/EC. DESIGN: - Drive via directly flanged geared motor with bevel gearbox - Sealing via radial shaft seals - Housing CNC machined - With square inlet and outlet Material variants: 3.4365 (AIZnMgCu 1.5), Polyamide (PA6)...

...Stepper motor systems with field-oriented control. Advantages: high torque, high dynamics, torque control, high continuous torque, precise and dynamic positioning, no gearbox, price.

...Hose Pumps for Industry, Laboratory, and Universal Use. Pumpenagent.de Your Supplier for High-Quality Industrial Hose Pumps - Hose pumps with adjustable gearbox for mechanical speed control - Hose pumps with fixed speed - Hose pumps with frequency converter - Hose pumps with pneumatic motor - Hose pumps with DC motor...

...Pneumatic starter with manual start, electric or pneumatic start valve, Vg = 500 cm³/U - 2360 cm³/U. Düsterloh pneumatic starters are used for starting diesel engines and turbines. They essentially consist of a gear motor, a single-track drive with a reduction gearbox, and a valve combination. Since the gear motor develops its highest torque at startup, it is particularly suitable for starting...

...Screwdriver with electronically controlled servo motor and digital data transmission. Available in torque variants of 0.5 Nm, 1 Nm, 2 Nm, and 4 Nm. Status display via light field, ergonomic aluminum handle, start button, and programmable function switch, screw-in point lighting, motor and gearbox integrated into a drawn aluminum tube, suspension hook. MDW version: Torque measurement directly via...