oil pressure sensors Germany

...Bourdon takes mechanical pressure monitoring into the digital age This innovative device fits to any comprehensive platform for machine and process monitoring as well as the preventive maintenance of equipment which is supported by a LoRa wireless protocol. Key applications include pressure measurement and monitoring for oil refineries, petrochemical industry and biodiesel plants. More...

... OPTISONIC 7300 delivers high performance over a wide flow range (up to DN600 / 24", turndown ratio: 100:1). The measured volume flow can always be calculated to standard conditions using the input of temperature and pressure sensors, which can be directly connected to the device. Following the initial calibration, the device provides accurate measuring results (±1% error of measured value). The...

... system" for wear through deviations in oil condition values o configurable specific limit values o precise real-time data • modularly implementable oil sensors • numerous options for data transmission • optional automatic data interpretation • also suitable for high-viscosity oil • also suitable for oil with air entry / air bubbles Sensors: • pressure sensors (bar) • moisture sensor (RF in %) • temperature sensor (°C) • sensor for oxidation rate • particle content (>4, 6, 14, 21 up to 250 micrometers (µm))...

... operation Signal Processing::24-bit A / D converter, real-time Valve types::sliding valve or poppet valve Flow control::Microcontroller 16-bit μC / 40 MHz Pressure sensors 1::Differential pressure sensor Pressure sensors 2::gauge pressure sensor Measurement ranges::± 500 Pa / ± 5,000 Pa Result units 1::Pa, hPa, PSI, Pa/s, hPa/s, mbar • l/s Result units 2::ml/min, ml/h, l/min, l/h Result units 3::mmHg...

...Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment...

...Non-contact, inductive displacement sensors from Micro-Epsilon operate according to the eddy current measuring principle. Unlike conventional, inductive displacement sensors, they measure on ferromagnetic and non-ferromagnetic materials providing high accuracy, frequency response and temperature stability. Due to their immunity to oil, dirt, pressure and temperature, these inductive eddy current sensors are primarily used for integration in machines and facilities.

... representation can be used to characterize the condition of a rotating system based on load, oil pressure, wear, etc. This allows for the comparison of a machine at different points in time and under variable conditions. The illustration shows the speed-based waterfall of a shaft with a resonance frequency at 6000 rpm. In the range of 6000 rpm, the amplitude increases from both directions.

... ... 600 bar — accuracy: 0.5 % FSO — pressure port G 1/2" flush for pasty and polluted media — pressure port G 1/2" open port PVDF for aggressive media Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 according to IEC 61508 / IEC 61511 — food compatible oil filling with FDA approval — cooling element for media temperatures up to 300 °C — customer specific versions...

...The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This...

... horizontal, vertical or inclined positions Accurate measurement result, since the reading is independent of the temperature and viscosity of the fluid Minimum failure costs due to simple function monitoring, rapid fault analysis and the possibility of simple repairs on site Areas of application To measure heating fuel consumption by oil burners (for example, in heating boilers, industrial furnaces, tar processing plants) Consumption monitoring and optimisation (ships, generators and large vehicles, etc.) Flow measurement for mineral oils Optional remote processing and integration into...

... What is the status of residual oil content, residual moisture, flow rate, and pressure in your production? With our sensors, you can capture all relevant parameters at the critical control points of compressed air. Do you require consistently high-quality compressed air for your processes? Then it is important to continuously monitor all influencing factors. Our data loggers make all relevant data accessible at a glance.

... in the field of chemical and process technology and are suitable for both continuous delivery and discrete dosage of watery solutions, solvents, oil and other viscous liquids. Accessories extending the operating parameters of the device are available. Advantages Ex-certification ATEX conform with EU Directive 2014/34/EU Precision motor and sophisticated control ATEX DC-servomotor with integrated...

... the need for an additional oil pressure light in the panel. - certified by Germanischer Lloyd - instrument housing is corrosion-free, hermetically sealed on the front side - double glass is fog-free and anti-reflective made of impact-resistant plastic - front ring is interchangeable (see VDO sensors & accessories)...

...Operating pressure up to 1,000 bar Manual coupling without system downtime – up to 700 bar Connection of hoses or measuring instruments such as sensors and pressure gauges Sample extraction and venting For oil or gas applications Use with hydrogen possible (at reduced pressure range)...

...The Oil Condition Sensor OCS is designed for continuous monitoring of hydraulic systems. Permanently installed in the system the OCS sensor monitors the condition of hydraulic fluids and lubricating oils in real time, whereby water ingress and oxidation can be detected in time. The OCS sensor is 60 times more sensitive than dielectric sensors on increasing contamination and protects the system...

... Freely programmable test sequence to set the operating point at which the test specimens are to be tested Central oil circuit connects 1-5 test chambers Changeover devices for different types of oil pumps Optional: Drive system for pumps without their own motor Calibration equipment for all built-in sensors Made in: Germany...

...Measurement principle: calorimetric Measuring range: from 0-20 cm/s to 0-300 cm/s, continuously adjustable Pressure: up to max. 100 bar Medium temperature: from -20 °C to +80 °C (S113) from -20 °C to +130 °C (S114) Flange diameter: 50.5 or 64.0 mm Sensor head lengths: 47.5 or 67.0 mm Operating voltage: 18 - 30 V DC Other versions: robust industrial version in stainless steel (M) Also available for oil-based media.

... resistant to water, dirt, and oil. All components are controlled via the user interface, and various washing programs can be selected. The return system can optionally be equipped with an oiling unit. The sheets are oiled by spraying, and the suction system captures the excess oil mist. The oiling unit is equipped with sensors, allowing the oiling process to start and stop automatically as needed. The appropriate oil quantity and pressure parameters can be stored in the cleaning program.

... international standards. Due to its mode of operation, the device can be operated under typical laboratory climate conditions. Only distilled water, oil-free compressed air (10 bar), and a supply voltage between 90...230V AC are required as operating materials. The operation of the HUMOR 20 is based on the fundamental two-pressure method and is thus similar to the devices used in national metrology institutes for humidity calibration.

...IPF cable connectors are primarily designed to establish the electrical connection of sensors. Their features are characterized by a robust design, available in the highest protection classes (IP67 IP68 IP69K) and optionally with 360° shielding. With attributes such as bus compatibility, suitable for drag chains and robots, oil and chemical resistance, welding spark resistance, resistance to...

... exciters, shakers, vibration measurement instruments (vibrometers), sensors for condition monitoring in oil, liquid level sensors, flow measurement sensors, USB data acquisition systems, 19" 2U modular signal conditioning systems. Partners: Celesco, Dytran, MEAS, Variohm, Entran, Online sensor encyclopedia: www.sensoren.info...

Since 1989, we have been your specialist for the individual manufacturing of pressure measurement systems in application areas such as: pressure, differential pressure, absolute pressure, flow and level measurements. Our scope of work includes new manufacturing as well as pressure measurement system repairs, independent of measurement converter and pressure measurement manufacturer. Certified manufacturing in a variety of materials and with the oil that is right for you.

... Technology - Explosion Suppression - Gas/Oil Pipelines - Testing/Calibration Technology Through close collaborative partnerships with customers and suppliers, STS AG develops, produces, and sells cost-optimized overall solutions. Thanks to extensive expertise, STS AG is capable of quickly transforming customer requirements into high-quality products. Subsidiaries in Germany, Italy, and France, as well as competent representatives and resellers, ensure worldwide distribution and service of the products.

Supplier of thermo bypass valves as well as oil temperature controllers and thermoregulators. Thermostatic controllers, thermo valves or thermo bypass valves, oil temperature controllers, refrigerant controllers, and much more.

Emission measuring devices, combustion technology, tunnel sensors, emission evaluation computers, dust measuring devices, volumetric flow measuring devices, ignition devices, burners, mercury measuring devices...

... pressure and position sensors for mining machines, peripheral valves as well as adjustable pressure relief valves for mining cylinders, mining sensors. Product Group Piezo Technology: Tilt mirror systems, drives, XYZ tables, positioning systems, fast and highly precise dosing valves for adhesives, gas, oil, valve controls, ultrasonic modular transducer, ultrasonic modular sensor, air ultrasonic, liquid ultrasonic, body sound sensors. Customized system solutions, interdisciplinary approaches.