valve installation Germany

...Solenoid valves for direct mounting on the pneumatic actuator or cylinder. Cylinder and valve become a compact unit thanks to simple installation in the air connection. Available in sizes 1/8 and 1/4 and with all common solenoid voltages. With manual override.

... installation locations for valves and system components whose size allows them to be housed in a shaft Are excellently suitable as inspection shafts with flushing connection, as feeding points for AWAaerob ventilation systems, for ventilation and bleeding valves, for pig traps etc. Are made of high-quality, durable and waterproof materials with a high material strength and low material weight, with the design permitting short installation times and excluding complex Housing:fibreglass plastic (GRP)...

...Miniature Check Valve As a screw-in valve made of stainless steel for M6 threads. – Individually positionable – Simple mounting hole – Space-saving installation – Suitable for hydraulics and pneumatics – Disassemblable and reusable – Suitable for various media...

...Compact valve blocks that reduce the effort for pipe installation help shorten maintenance times and minimize investment costs. One well-known application of hydraulics with a connection system tailored to the application allows for the logical concentration of multiple process valves into a single block according to customer specifications. All necessary connections between the process valves are integrated within the manifold block. Size::DN 15 - DN 50 Pressure::PN 40 Material::Stainless Steel 1.4571 / 1.4404 / 1.4301 / 1.4305; Ductile Iron (EN-GJS-400-15)...

...The short stroke lift is ideal for accessing two fixed transport levels. By using a rodless pneumatic cylinder, a low installation height is possible. The speed of the lifting/lowering movement can be adjusted via a throttle valve and is a maximum of 0.5 m/s. Technical Data Short Stroke Lift KHL-2045 • Accessing two transport heights • Pneumatic lifting and lowering • Stroke 200 to 800 mm • Load capacity up to 100 kg • Rodless cylinder...

... distances. For highly viscous materials, a flush-mounted membrane M12 x 1 is available, which eliminates any disruptive dead volume. To measure ambient pressure (relative measurement), there is a small opening protected on the back of the sensor. In the absolute measurement option, the applied pressure is measured against an enclosed vacuum. For electrical connection, a valve connector DIN...

...For driverless vehicles, the test operation requires additional safety in the form of redundancy for brake activation. Our emergency brake actuator offers a safe option with the highest reliability. As soon as a communication failure occurs, the pneumatic cylinder is activated via a normally closed valve from a monitored pressure reservoir. The brake pedal is thus pressed, and the vehicle is decelerated using ABS braking. The installation takes less than 3 minutes and requires no modifications to the vehicle. It also does not interfere with manual vehicle operation by the driver when installed.

... of the saw frame with a quick-release lever — Feed adjustment via a hydraulic flow control valve — Automatic adjustment of the saw frame position above the material to be cut — Frequency-controlled band saw drive (partially optional) — Exact cutting path Type: fixed installation Technology: band, miter Processed material: for steel, for plastic Application: for profiles, for pipes Additional features: automatic, horizontal, precision Additional features: with hydraulic vice...

... is done using a compressed air pulse via solenoid valves. This method of cleaning is very economical, as it is demand-dependent based on differential pressure measurement. The installation and removal of the filter bags are carried out without tools from a mounting platform. Systems that operate in frost-prone areas are equipped with valve heating and an additional cover for the solenoid valves. The required piping layout is designed individually. Hellmich exclusively uses branded components for electronic or electrical assemblies...

...Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation...

...Field-wireable connectors are available in sizes M8 × 1/Ø 8 mm, M12 × 1, 1/2", 7/8", M16 × 0.75, M23 × 1 and also as valve plug. The connectors make installation easier in applications in which it is difficult to estimate the needed cable length.

... pair of clamping jaws, 1 recovery bowl, 1 MSU assembly key and 1 MSZ, maintenance booklet and spare parts list Features • Hydraulic head made of aluminum, cylinder surface with wear-resistant treatment • Pneumatic cylinder made of cast aluminum • Thanks to the hardened and chrome-plated steel piston, the device operates effortlessly and is wear-resistant • Long service life, due to compact wear-resistant seals with high scraping effect • Quick-release valve for fast return and high productivity • Adjustable hydraulic head at 360° Material: Aluminum, Steel...

...{"Switching Function":"3/2 Ways","Sealing of the Pneumatic Interface":"Form seal (GKR), encapsulated exhaust","Installation Position":"Any (preferably anchor orientation vertical)","Medium Quality according to ISO 8573-1":"Compressed air of quality class 4, 3, 4","De-energized State":"NC (normally closed), NO (normally open)","Seal Material":"FKM (other seal materials available upon request)","Valve Housing":"Plastic","Ambient Temperature":"-10 °C to +50 °C"}...

... start the engine is significantly reduced. The starting behavior is influenced, among other factors, by the design of the throttle bore. The closing force [3] of the decompression valve is adjusted to the existing pressure in the cylinder to achieve optimal closing behavior. The valve closes automatically with the first ignition cycle. The installation height [4] is adapted to the desired installation situation.

...The single-plate shut-off valve type yp PSA-ELI SIL-PE is suitable for use wherever a secure shut-off of gases according to DVGW G260 is required. As part of the proven KÜHME shut-off valves for municipal gas supply, the type PSA-ELI SIL-PE can be used wherever a secure shut-off of gases according to DVGW G260 is necessary. The single-plate shut-off valve, operated via an installation kit, sets...

...HoKa backflow valve for vertical installation, version 2 made of plastic. Available in the following materials: PVC, white PVC, PPs, PP-H, PE-HD, PP-EL-s, PVD.

...The GEMÜ 410 is equipped with a low-maintenance, corrosion-resistant plastic piston drive. It offers control functions such as "spring force closed," "spring force open," and "bi-directionally controlled." - Lightweight - Robust design - Shatterproof, corrosion-resistant - Compact and lightweight construction with high performance - Easy installation Type: with shut-off valve...

...Thermostatic mixing valve for installation in the hot water line as scalding protection. The thermostatic mixing valve MA10/MA25 is used to limit the hot water temperature, e.g., in thermosiphon systems or in solar drinking water systems. H = Hot water connection | C = Cold water connection | M = Mixed water outlet...

...Pipeline valves, as inline armature with venting and breather valve function - Application as inline armature with venting and breather valve function for vessels. Preferably used for installation in pipes.

...Telescopic installation set for civil engineering / road construction / pipeline construction. Infinitely adjustable, with square key bar, dome sleeve, pull-out guard, cap, protective tube and stepped bell with dirt-tight fit. Poles and castings completely galvanized. Art.-No. 243150 cover depth:0,75 - 1,00m Art.-No. 243105 cover depth:1,00 - 1,50m Art.-No. 243167 cover depth:1,30 - 1,80m...

...The technology in the FMX series stands for higher flow rates compared to other valves. Or are you looking for compactness? Our FMX valves occupy just a small installation space, while offering the same speed and quality.

...Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.

...The 5D pressure reducing valve is used to reduce system pressures to largely constant working pressures. Due to its design it requires extremely low maintenance in applications and is therefore suitable for horizontal and vertical installation. Adjustment Range:0.5 - 5 bar Working Pressure Variation:± 0.2 bar Kvs Value:0.35 m³/h Pressure Stage:PN6...

...Connections: M5, G1/8", G1/4", G3/8", G1/2", G3/4", G1" Diameter Ø 4, 6, 8 mm The VNR series check valves are available in threaded versions or for pipeline installation with integrated plug connections. Due to their design, they are also suitable for use at minimal operating pressure.

...To safely vent or drain piping systems, we have developed corrugated pipes with integrated valves. The advantages are clear: weight can be saved, leakage possibilities reduced, and installation time minimized. The inner diameter and volume are tailored to the flow rate, as well as the valve's opening behavior to the pressure range. Available qualities, max. operating temperature: PP 100...

... - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated...

...Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in...

...Cold water meter installation box for masonry, featuring a heat-insulated and condensation-proof insulating body, with a plasterable surface, including 1 water meter base body and 1 straight shut-off valve, with 2 internal threads Rp 3/4, dimensions 240 x 350 x 70 mm. Material: Foam, plastic pipe, CuSi Sealing ring: EPDM Operating pressure: 16 bar Operating temperature: -30 °C - 70 °C Dimension: 20 mm...

...The flow of cooling water can be checked at a glance. Visibility:Fluid flow from low flow rate (2 L/min) can be visually checked with the rotating Easy maintenance:Flow Vane ASSY can be replaced without removing it from the piping (both models). Safety:The stopper prevents unintended removal of the plastic parts. Easy installation:The installation and replacement is easy since the screw part of T2 side rotates freely Applicable Fluids:Water Working Pressure:10 bar Valve Structure:Straight through Body Material:Brass Seal Material:NBR / FKM Size:3/8" / 1/2"...

... the heat exchanger area for optimal efficiency. With automatic grate cleaning and automatic cleaning of the turbulators. Modular design for easy installation and assembly. Optional vacuum feeding system available. Optional up to 6 heating circuits through extension modules. Eligible for funding according to the current guidelines of BAFA.