measurement sensors Germany

...Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. The increased requirements...

...Sensors for measuring in air/gases and water/liquids for stationary and mobile applications. The measurement principle is based on a rotor achieving a rotational speed proportional to the flow velocity of a fluid. The rotational speed is nearly independent of the density, pressure, and temperature of the measuring medium. The detection of the rotor's rotational speed is carried out by a...

... supplied with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. The integrated electronics produce a signal voltage that is transmitted to the radiometer. Various sensors can be used with a radiometer by means of internal electronics. Dimensions:Ø 40 mm, h 35 mm Weight:150 g Cable length:2 m Operation temperature:0 to 40 °C Signal voltage:0 - 2 V...

...The UV sensors of the SUV19 series are designed for the simultaneous monitoring of multiple UV emitters arranged radially around the sensor. The sensor features a 360° measurement field.

... provided directly via the IO-Link interface – a standardized 5-pin cable with M12 connector. DMS sensors can be connected via a 4-pin M8 connector. Interfaces: IO-Link Measurement rate: 1000 values per second Sensor type: DMS Protection class: IP65 Supply voltage: via standardized IO-Link interface Connections: M8 4-pin (sensor), M12 5-pin (IO-Link)...

...Incremental measuring probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture, and dust. Due to the Ø 20mm clamping shaft, it is extremely robust against vibrations and oscillations. Perfectly suited for automated measurement data acquisition in measuring devices, assembly systems, manufacturing plants, and individual measuring stations...

... transmitters for float-based level measurement are also available, as well as cable pull sensors. Position information can be transmitted with high precision and dynamically over measurement lengths of up to 40 meters via digital and analog interfaces to the higher-level control system.

... angle signal (5 V - 24 V), + Torque transducer for measuring speed and angle starting from 0.02 Nm, + Extended speed range for speed and angle measurement, + Frequency output for torque signal 10 kHz ± 5 kHz (RS422), + Wide input voltage range (9 - 28.8 V), + Optional 0.05% linearity error, Measurement range: 0.02 Nm - 20,000 Nm Accuracy: 0.1% or 0.05% Option 1: Speed measurement Option 2: Angle measurement...

MSO GmbH develops, manufactures, and distributes sensors and systems for speed and distance measurement, for capturing and monitoring goods flows and spray quality for industry and agriculture. A focus is placed on innovative radar applications.

...The key to the successful optimisation of compressed-air systems is data. The METPOINT® range of measurement equipment with sensor technology and monitoring provides the data base for the evaluation and assurance of the compressed-air quality and for the identification of hidden cost drivers. Our measurement equipment can also be employed for the extension of plants and for the early elimination...

... control technology for pump control. Magnetic-inductive flow meters are reliable and economic compact units or installation in the pressure line and are available in two basic versions: Sensors for pipe installation with integrated measuring transducer and on-site display as a compact unit Sensors for pipe installation with separate measuring transducer. With this version, the measuring transducer can be located separately on the wall in the service building or as a fitted housing directly in the AWAcontrol control cabinet. ...

... effective pressure principle operates without rotating parts. The sensors can be visualized via a protemp control system or connected to a PLC, depending on the model. A completely contactless flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in the consumer return PT 1,000 temperature measurement in the consumer return 6 x...

...Analog Sensors: Capacitive Sensors Electromechanical Sensors Application: Reliable and accurate measurement of fill levels, even with changing media, in: Telemetry Systems Mobile Tanks Motorsport Vehicles Commercial Vehicles...

... enable precise measurements and thus provide a reliable basis for the control and optimization of industrial processes. From pressure and temperature sensors to flow meters, we offer a variety of solutions that enable accurate recording of process parameters. Versatility for various applications: Our range of industrial metrology includes a wide range of products suitable for various applications, be it chemical, petrochemical, food, power generation or other industries.

... to the specifications of IPC/JEDEC-9704A. Expert advice from TEPROSA When measuring strain, in addition to many factors such as the appropriate measurement technology, it is also important to rperform the strain measurement correctly and to ensure that the sensors record the forces correctly. To ensure that the deformation of an object is correctly determined, it is therefore crucial to select the right strain gauges (also known as measuring strips) and to place them in the correct position on the measured object.

... as variants in which the CSN® Current Sensor will be mounted hanging in the busbar. Schniewindt has implemented CSN® Current Sensors for nominal currents of up to 5 kADC at system voltages of 800 kVDC, which have been successfully typetested. Also for the precise measurement of small currents (1 to 10 A), such as transient currents in capacitor banks, Schniewindt offers appropriate solutions. All of our CSN® Current Sensors are individually designed according to customer requirements. ...

... actuator motor. During the steering process, the torque sensor detects that increased force is being applied at the steering wheel and assists this with an actuator motor at the steering gear. In practice, this torque sensor consists of a torsion shaft with a highly sensitive angle sensor that measures very small angles. These angle sensors are measured and calibrated on the testing device we manufacture.

...For continuous level and temperature measurement of water and wastewater, BD/SENSORS has developed the LMK 307T. The advantage: Simultaneous measurement of level and temperature with separate, independent signal amplification. Maintenance and wiring efforts are significantly reduced. In addition to the classic signal processing of the level, there is an additional signal circuit independent of...

...The OnRobot force-torque sensor provides accurate force and torque measurement along all 6 axes. This gives you precise control during difficult assembly, polishing, grinding or deburring. In addition, the HEX software offers path recording, force control and special functions for insertion. This reduces the integration time for your production line. Our sensors are suitable for most of the...

...The RTR502B is a temperature data logger with an external sensor that responds quickly to temperature changes. It offers a wide selection of optional sensors with a large measurement range (-60℃ to +155℃), providing additional versatility for your situation. The logger is waterproof according to IP64 (splash-proof). The RTR502B data loggers have a wireless range of up to 150 m (500 ft) with...

...Reliable vibration monitoring at the highest level with Hofmann's balancing technology As a cost-effective solution, the VibroGard-M is used for monitoring the condition of fans, pumps, or compressors. The compact vibration and rolling bearing monitor VibroGard-R 1500 is an economically attractive solution for monitoring motors, spindles, fans, or pumps. In addition, Hofmann offers a wide range of sensors suitable for various applications. Hofmann on YouTube: https://www.youtube.com/channel/UCKAWJO4lWIStI4Yi-Vqc0VQ...

...Sensors for filter break monitoring Sensors for ambient air monitoring...

...Heidenhain Measurement and Control Technology Whether you need measuring devices for your machine tools or length measurement systems for complex positioning tasks, Heidenhain is the best choice. With over 40 years of experience in measurement and control techniques, we offer a wide range of products to meet the diverse needs of your business. Rotary sensors are available in various ranges...

... Material: PVC, PP, stainless steel, brass Process connection: G1/2" to G2", round and oval flange Electrical connection: PVC and silicone cables Contacts: max. 4 normally closed, normally open, 3 changeover contacts Length: up to 2,000mm Temperature: -40°C to +150°C Pressure: max. 3bar Protection class: up to IP65 Option: Installation of temperature sensors Electrical connection: M12 connector Electrical connection: Aluminum and PS connection housing...

CiK Solutions develops and distributes technical products for quality assurance. The goal of CiK Solutions is to support you in continuously improving the quality of your products. Our core competency focuses on strictly regulated industries such as pharmaceuticals, biotech, medical devices, clinics, aerospace, calibration laboratories, as well as other sectors where temperature & humidity are cri...

... new A111 measurement module in the Q.series product family allows for signal acquisition from four IEPE sensors. All inputs are galvanically isolated, ensuring high resistance to interference and robustness. The four 100 kHz A/D converters with a resolution of 24 bits provide significant dynamics. Multiple measurement ranges and filter options meet the requirements of vibration analysis. The A111 module fits into the series of Q.series signal acquisition modules and is available for rail mounting, as a 19-inch plug-in unit, or in a mobile housing.

... on the vehicle performance and the service life of the tyre. Range:0 to 200 °C Accuracy:2 % FS Ambient temperature error:2 °C Sensitivity:20 mV/°C Response time (0-90%):250 ms Signal:0.5 at 0°C V Supply Voltage:5 to 16 V Supply Current:1,5 mA Output Voltage:0 to 5 V Output Impedance:47 Ω Sensitive Element:Thermopile with Silicium Lens Wave Length:8 to 14 µm Measurement distance:30 to 150 mm...

...4-channel temperature acquisition module for PT100 or thermocouple with CAN - The µCAN.4.ti-F1 is the universal measurement module for mobile acquisition of temperature data. Depending on the module type, resistance sensors as well as any kind of thermocouple can be polled at an overall sample rate of 4 kHz. Temperature thermo type K:Temperature Pt100, Pt200 (2- / 4-wire) Temperature Pt500...

...Electronic measurement, control, and automation are crucial for nearly all industrial sectors. Sensors and measurement technology are closely linked in many areas. The application of sensor technology ranges from collecting factors in process engineering to controlling products or environments to analyzing properties in manufacturing and automated production. Accurate measurement of physical...

...Our quality products in the field of temperature measurement, THERMASGARD® and THERMASREG®, meet the highest standards of precision, innovation, and durability. S+S Regeltechnik also impresses with sophisticated thermostats, active temperature sensors, passive temperature sensors, and many other solutions related to temperature measurement. Your advantage: Our holistic understanding of...