temperature sensor calibration Germany

... due to permanent deformation of the sensor element. Measuring ranges: 0 … 1 N / 0 … 2 N / 0 … 5 N / 0 … 10 N / 0 … 20 N Force direction: Tensile and compressive Standardization: Optional Output signal: 1 mV/V Protection class: IP20 Overload protection: Yes Operating temperature range: -20 ... +80 °C Special features: Small dimensions Special features: Easy installation Special features: Special designs available upon request Special features: Burster TEDS optionally available...

... Analog output:± 0.25 % FS Drift vs Ambiant Temperature Analog output:± 0.25 % FS Sensitivity:Linear (See calibration table) mV/°C Sampling frequency:5 Hz Supply Voltage:5–16 V or 12–33 V Supply Current:3 mA Output Voltage:0–5 V or 0–10 V Output Impedance:47 Ω Digital output:ASCII @ 5hz, 9600 Bauds Calibrator:Fluke 714 Dimension “P” type:35 x 20 x 10 mm Material “P” type:Plastic Dimension “A” type:32.5 x 19 x 10 mm Material “A” type:Aluminium Weight:15 g Protection:IP53 Vibration test:20Gpp5’ Shock:500 G Operating Temp:-40 to +125 °C Storage Temp:-40 to +125 °C...

... on highly stable, piezoresistive pressure measuring cells, which are mounted together with an ASIC on a ceramic substrate. The sensors are compatible with the SM5852 as their successor and feature a more modern ASIC for improved temperature compensation and calibration.

...— Residual oxygen measuring device — Power cable — Hose set, 3 m, including filter and cannula — Calibration certificate — Transport case Measuring range: 5 ppm - 21% O2 Ambient temperature: 0–45° C Measurement accuracy: +/- 0.3 mV (EMK sensor) Warm-up time: 3–5 min Response time: approx. 2 sec. for changes Dimensions (L x W x H): 180 x 210 x 85 mm without handle Mains voltage: 100-240 V AC Warm-up power: approx. 40 VA Control power: approx. 20 VA Weight: 2.1 kg...

... calibration certificate. The RMD is characterized by a very high resolution, a high measuring range, a data interface and the illuminated graphic display. Dimensions:68 x 25 x 15 mm Weight:~ 70 g Measurement range:0 - 20 W/cm² Operation temperature:0 to 60 °C Storage temperature:-10 to 60 °C...

...The DAIP offers the user extreme ease of use combined with the advantages of the heated sensor tip. Thanks to the auto-zero function, direct calibration can be performed on the device or from the control room. The mass pressure transmitter provides mA or V signals at the output. Thanks to the patented sensor tip, the sensor can also be removed in the case of already cooled molten mass. This...

... calibration curves that support most standard low-temperature sensors. Additionally, eight custom calibration curves are available for custom or calibrated sensors. Each user curve can have up to 200 entries. The temperature range depends on the specific sensor type and ranges from 500 mK to 1200 Kelvin. The controller offers various interfaces such as Ethernet, as well as optional GPIB and USB. LabView drivers are available for all interfaces.

... FPM (Viton®) gasket ▪ Weight: 200 g / .44 lbs ▪ Suitable for gases and liquids (in the case of aggressive media, only after consultation) ▪ Accuracy (±0,25% FS* typ.) ▪ Automatic sensor recognition ▪ Pressure connection G1/2 (without adaptor) ▪ Calibration certificate on request Ambient Conditions ▪ Media temperature: -25 °C ... +105 °C /-13 °F ... +221 °F ▪ Ambient temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Storage temperature: -25 °C ... +85 °C / -13 °F ... +185 °F ▪ Compensated range: 0 °C ... +85 °C / +32 °F ... +285 °F ▪ Load cycles (10 6): 100 Electrical Data ▪ Response...

...2-channel temperature measuring device with external sensor connections including wall mount, lock, batteries, and calibration protocol. Sensors available in different designs. Large memory for 1 million measurement values - large, easy-to-read display.

... Measuring Unit: Pa Smallest Measuring Span: 0…200 Pa (2 mbar) Measuring Range Selection: Factory preset Storage Temperature: -25…+60°C PERFORMANCE: Overload Safety: 0.2 bar Static Pressure: Max. 0.2 bar Zero Point Calibration: Adjustable via REED contact, no cyclical zero point calibration required Reaction Time: Immediate...

... when moving between a high and low dew point process • Easy-to-use, simple operation, operator training in minutes • Rugged capacitive sensor • Long life rechargeable battery • NIST traceable calibration • Calibration certificate supplied with factory calibration...

...pH Bluetooth Electrodes with Temperature Sensor HALO™ connects at the push of a button to a device up to 10 meters away. The activity of an electrode – measurement and data transmission – can be identified by the blinking blue LED ring. Once connected, the calibration data and other parameters are automatically transferred to the connected device. Energy-efficient and reliable. The Bluetooth®...

...The BW Clip series of single gas detectors offers up to three years of maintenance-free operation. This means greater flexibility and no downtime. - Up to three years of completely maintenance-free operation - Automated test routine for increased safety - No calibration or adjustment required - No battery or sensor replacement - Compact, lightweight, and user-friendly - intuitive operation with...

...Temperature / Humidity Sensor for DTM 4000 with I2C Interface Currently, three different sensors are available. These sensors consist of the respective actual sensor, combined with a memory. In this memory, calibration data, manufacturing date, and serial number can be stored if necessary. The sensor type is also noted there. Custom designs are possible. Sensors for Raspberry and Co. Since the...

... measurement values are in view, and the hot-spot display quickly and easily locates the core flow. Easy, intuitive operation, the latest technology, and an ergonomically shaped housing with a soft case and integrated magnets are just a few of the outstanding features of the Fyrite® INSIGHT® Plus. The B-Smart® sensor technology allows users to replace the sensors on-site, eliminating the need for factory calibration. A long-lasting O2 sensor is also available. The flue gas measuring device is fully equipped and ready for immediate use.

... thermal or infrared sensor. The standardized output signal of 4-20mA simplifies integration with existing systems. Calibration and adjustment can be performed as a one-person calibration without the need to open the housing. Power Supply: 24V Power: approx. 3.3 W Operating Temperature: -25°C to +60°C Signal Output: 4 to 20 mA and Modbus Housing: Aluminum alloy / Stainless steel Weight: approx. 1300 g Dimensions: Diameter 95 mm, Height 82 mm Connection Cable: 4-core, shielded cable Gas Type: Butane...

... conductivity of 1000 mS/cm. Four conductivity ranges may be selected to configure the controller over a wide range of applications. Choice of measurement units is µS/cm, mS/cm, ppm and % concentration. The non-contacting, toroidal sensor technology is immune to thin coatings and the contamination and calibration problems that direct contacting sensors are prone to. Integrated datalogging is available to validate performance. With a USB memory stick data and event logs that include conductivity measurements, temperature and relay status can be extracted. Then download log files from the USB stick...

... In the in-house calibration laboratory with DKD and DAkkS accreditation, manufacturing-related quality controls, calibrations, and measurement investigations are carried out. Entrust such an important topic as temperature measurement to competent hands! We plan, design, implement, and install for you. Product quality and functionality are our focus for your solution. Rely on the experience of thousands of applications.

... Bietigheim-Bissingen, about 30 km from Stuttgart. At the heart of our activities are customer-oriented consulting, high product availability, and maximum price-performance ratio. Our clients include renowned companies such as large automotive and aircraft manufacturers as well as significant automotive suppliers. In addition to our consulting and trading activities, we support you with reliable services: - DMS applications - Rental service for measurement data acquisition systems - Calibration support for measuring devices according to DKD and ISO...

TetraTec Instruments GmbH specializes in the development, manufacturing, and calibration of sensors, measuring and control devices, as well as custom testing and calibration systems for measuring pressure, flow, and tightness of air and gases. Based on modular software, hardware, and sensor technology for pressure, temperature, humidity, and flow, the offered measuring and control devices are...