spindles for lathes Germany

...The changeable centring tip for counter spindles Would you like to use your counter spindle temporarily as a tailstock, and then once again as a normal chuck? You can with the EWS CenterPoint Area of application: Lathes without tailstock and with a turret To support long tools Top changeable short taper 12 The top kit can be integrated in simple combination holders Prerequisite...

...Open C-Form tailstock with swivel top, designed for mounting on Mazak lathes. The tailstock is secured to the Mazak bed slide using 4 screws on the console plate. The swivel top (shown on the right in the image) allows for easy insertion of the workpiece from above. All tailstock spindles can be operated from the operator's side (marked with red arrows). The operation of the 4 o'clock and 10...

...Spindles for lathes are workpiece spindles and primarily feature spindle housings that are specifically adapted to the machine, either prismatic or cast. Spindles for lathes are workpiece spindles and are predominantly equipped with spindle housings that are specially tailored to the machine, either prismatic or cast. The spindle shaft has a spindle head standardized according to DIN 55026 and...

...as a double spindle machine with 3 operations and 2 direct transfers By using 2 vertically arranged spindles per operation, 2 workpieces are processed simultaneously. The transfer of parts between the 3 tool blocks is fully automated and occurs through direct handovers without releasing the workpiece. In total, there are always 6 spindles engaged at the same time. Of course, the system can be...

...Up to 24,000rpm easily without any electrical connection. Just pull the normal spindle out and mount the IB Spindle on the machine with just one wrench. Reduce cycle time while achieving more stable quality for your turned products by creating ideal conditions for small cutting tools.

...• increased productivity • reduced cutting wear • higher cutting data • better surface quality • more stable processes With a translation of i = 1:4, speeds of up to 32,000 RPM can be achieved, along with internal cooling of up to 80 bar. This means that with our high-speed spindles, you can also realize cutting speeds with tools of small diameters. Innovative gearbox technology: At W&F, we...

...Whether lathe or machining center Complete machining made easy: Our MANDO and MAXXOS segment clamping spindles can be used not only on lathes but also in a stationary setup. Simply screw them onto the manual operation unit ms dock [manually operated] or hs dock [fluid operated], and you can securely clamp your workpiece from the inside in a stationary manner. Precise, without vibrations, and...

... Our expertise • Machining with driven tools to create decentralized holes, threads, or polygonal contours • Parts with complex geometric shapes such as cones, pins, spindles, or spheres • Machining of non-metallic materials such as PTFE, carbon, or various plastics • Machining of materials with a hardness of up to HRC 62 Maximum turning diameter: 1,200 mm Maximum center length: 4,000 mm...

...Everything is possible - from efficient processing "off the shelf" to the machining of complex components. We manufacture on precise CNC lathes, designed for the economical production of small, medium, and even large quantities. With driven tools, main and counter spindles, Y and C axes, we achieve complete machining of various products in just one setup. Our manufacturing focuses are on...

...We manufacture components according to your drawings and/or 3D models on our state-of-the-art CNC lathes equipped with bar feeders, counter spindles, and driven tools. Turned parts can be produced directly at the machine as well as through our CAM workstations.

...1-Channel Minimum Quantity Lubrication Systems for Internal Lubricant Supply to CNC Machines, Lathes, Drilling, and Milling Machines Function: The generated aerosol is transported to the tools via one or more hose lines and rotary unions, machine spindles, as well as tool holders. (Suitable only for tools with cooling channels) Advantages - for one spindle / one turret (master) - or multiple...

...We manufacture turned parts such as threaded bushings and nuts for mechanical engineering, power plant technology and for furniture technology. The treatment of the turned parts takes place on our CNC turning machines, conventional lathes, 6-spindle multispindles or automatic lathes. Threaded bushings and thread nuts are usually supplied as a system with matching stems (spindles). CNC-turning...

...We design and manufacture pull rods for turning machine spindles according to your requirements. - Customizable for any clamping cylinder and clamping device - Statically or dynamically balanced - Optional finishing (e.g., galvanic zinc plating)...

... machining units. In a multi-spindle machine, the bar material or pipe material/automatic turned parts are distributed across several workpiece spindles and processed simultaneously by different machining units. Multi-spindle lathes and rotary transfer machines have a very high setup time to configure the machine for the parts to be produced. Therefore, the production of CNC precision turned parts and automatic turned parts is only worthwhile at very high quantities.

The IBAG Group is one of the leading manufacturers of high-frequency motor spindles for use in machine tools, lathes, and grinding machines. In addition to the sales and service of IBAG products and services, IBAG Deutschland has specialized in the correct application of HSC technology. In our technology and demonstration center located in Lindlar (DE), customer requirements can be implemented...

Operation of a turning shop. We deliver all types of handles and turned parts according to drawings or samples, as well as CNC-milled parts. Additionally, we offer a wide range of shapes for stair spindles and accessories for carpenters and DIY enthusiasts.

... annual revenue of many machine tool manufacturers already accounts for up to 35% of their annual revenue. Our company is a competent and cost-effective alternative to machine tool manufacturers for the repair of high-quality machine tools. With our many years of experience in the installation and commissioning as well as the repair of milling machines, lathes, flexible manufacturing systems, and...

With our modern, well-equipped machine park, we manufacture precise, reliable, and economical series parts. The CNC lathes are equipped for the complete machining of turned parts with the highest complexity, featuring driven tools, counter spindles, and multiple axes. The remaining turning operations are carried out on powerful, competitive CNC and cam-controlled lathes. CNC turning centers and...

...ALBA GmbH stands for precise manufacturing of fixtures, machine parts, and small series according to your drawings, as well as the assembly of, for example, spindles and gears. Our machinery consists of the latest CNC milling machines and lathes, as well as surface and cylindrical grinding machines. We take care of any surface treatments after manufacturing with our long-standing service partners, such as hardening/nitriding, painting, bluing, galvanizing/nickel plating, and anodizing.

... 8.0, hole 4.8 x 450mm) Use our contract manufacturing not only for technically challenging drilling: multi-spindle drilling also relieves your expensive lathes at high quantities. Example: We manufacture for our customers in demanding CNC turned parts a hole that was calculated with 90 s. Technically, the hole is feasible on the lathe. The special deep drilling process allows the cycle in 47 seconds and is drilled with 3 spindles. The time factor is thus at 17.4%, making outsourcing not only economically feasible but, in light of the tight delivery deadlines, almost imperative.