chemical material Germany

...First sliding bearing material with polymer sliding layer for lubricated operating conditions with high sliding capability and good wear resistance, which can be machined in the housing to reduce the sliding bearing clearance.

... explosion, emission and environmental protection as well as for material resistance and product compatibility. Furthermore, our mixing and dosing systems, especially in batch operation, offer a high degree of production reliability, which is guaranteed by minimisation of material contamination, reproducibility and detailed documentation.

... configurations. We deliver the PFA-lined valves fully automated with pneumatic and electric drives, including complete design, assembly, and delivery. Application areas: Chemical Industry ✓ Oil and Gas ✓ Pharmaceutical Industry ✓ Water Treatment ✓ Food and Beverages ✓ Mining and Minerals ✓ Semiconductor Manufacturing Our PFA lined valves: Ball valves / Three-way valves (2- & 3-way) Conductive valves...

...For more product data, please use the data sheet or contact us. - WIWOX® 410 is a liquid, alkaline mold cleaner designed to remove baked-on rubber and plastic residues from metallic surfaces. It is also used as a paint remover. WIWOX® 410 is applied undiluted for the immersion cleaning of metal molds. The basin material can be steel sheet or stainless steel. The size of the basin depends on the...

...Ecocell® is a patented, endothermic chemical foaming agent (CFA) masterbatch that helps to simultaneously improve multiple requirements for plastics. Our masterbatches are designed to optimize the properties of end products for specific applications. The use of Ecocell® significantly reduces material consumption. Additionally, the mechanical properties of the products can be optimized. Furthermore, cooling times are shortened, performance is enhanced, and energy costs are reduced.

... resistant pipes, fittings and valves in the chemical industry. This special alloy is called Zircaloy. Zirconium plays an important role in reactor construction. It is used for fuel element claddings and holders, for the pressure vessel lining, and for all structural components that come into contact with neutrons. In the rocket and jet aircraft industry zirconium is used for the manufacture of combustion chambers and feed lines. In electron and X-ray tubes zirconium is used as getter material.

...Chemical protection at the highest level with best permeation properties The material for this Fluorpolymer-coating, which will be applied with a specific method, is highly resistant against chemicals and acids, and has extraordinarily advantages, compared with common coating and lining systems. Special features - Seamless lining for almost all designs - No welded joints - Excellent bonding to substrate - Compared with usual PFA outstanding features in permeation by using filler - Layer thickness from 200 μm up to ~ 1.5 mm...

... segment discs and mixing bars. Mixing hooks are flanged to the housing. The small distance of the mixing hooks to the segment discs and to the rotor shaft results in a high mixing/kneading effect and extensive self-cleaning of the rotor. The inside of the housing is cleaned by the mixing bars. This prevents crust formation on the heating surfaces and the formation of lumps. The housing, shaft, and disc elements can be heated or cooled. Product transport in the Reactotherm occurs through the angled mixing bars on the segment discs. Material: Stainless steel, C-steel...

...The technology of multi-stage ACP rotary piston pumps meets the requirements of applications where clean and oil-free vacuum is essential. The contactless pump module operates without internal lubricants. It generates an oil-free vacuum without backflow of hydrocarbon vapors. There is no sealing material between the rotor and stator, preventing the formation of particles.

...The pharmaceutical and biotech industry involves a wide range of mixing tasks, for which precision and consistence are of utmost importance. Particles must be evenly suspended and homogenized in liquids for filling processes. In some cases, multiple processes, such as for example heat transfer, rapid mixing, or material transport, must take place simultaneously within one reactor. Specific...

Container and space systems, Mobile buildings for every application - high-quality and cost-effective. The offered delivery program includes the entire range of container trading - from used shipping containers, new storage and transport containers, quick-build containers, storage halls to fully equipped large container systems. Our specialty: Technical containers for various applications (contr...

...316/316L Stainless Steel Properties: Material: Stainless Steel 316/316L - Corrosion resistant to chlorides, seawater, and many chemicals - Excellent resistance to pitting and intergranular corrosion - Stainless Steel 316L is particularly suitable for welding applications due to its low carbon content - High strength and good formability - Non-magnetic in the untreated state Available Sizes: - Thickness: 3 mm to 50 mm - Width: 1000 mm to 2000 mm - Length: 2000 mm to 6000 mm The 316/316L stainless steel plate from EDER is ideal for use in chemical plants and marine applications.

Modern, efficient, and flexible - welcome to Simag Service GmbH. Founded in 2004 as a manufacturer of custom screening and separation systems, we quickly became known as a problem solver for customers in the chemical industry across Europe. Based on our know-how and extensive knowledge in the contract processing sector, we fully specialized in services for the chemical industry in 2013 at our head...

...iglidur® X6: nano material The lifetime is up to six times longer than iglidur® J Thanks to nano-technology, iglidur® X6 has a service life of up to six times longer than the heavy duty iglidur® X bearing - even beyond 100°C. iglidur® X6 is available as cylindrical bearings and plain bearings with flange. Lubricants and maintenance-free Long term service temperature up to +250°C Up to 50% better press fit as iglidur® X High compressive strength Very good chemical resistance PTFE free...

... - Construction protection agents - Adhesives - Reference samples - Industrial greases - Any type of chemical products - Powdered substances Item number: 450000061500 Height (in mm): 390 Suitable for food: No (lid seal) Diameter top (in mm): 328 Diameter bottom (in mm): 312 Material: Tinplate Nominal volume: 30,000 ml...

... of application possibilities, such as: - Sealing of access hatches - Sealing of boilers and oven doors Our application technology team is happy to assist you with material selection. For high-temperature applications, our SILCAFLEX textiles are also available as an alternative. SILCAVER 55 straps can optionally be equipped with self-adhesive film. This ensures a time-saving and easy installation.

... comfort the product is available as coarse powder, fine powder and as granules. Detailed specification, material safety data sheet and additional documents are available on request. CAS:16940-66-2 Product Information:Intermediate State:Solid TSCA:Listed...

...The sliding shut-off valve type 8041 in its short version is universally applicable for neutral and aggressive fluids in the chemical industry, process engineering, and plant construction. This sliding valve, with its short stroke, allows for a very high switching capacity with extremely short switching times. Size::DN 15 - DN 125 Pressure::PN 10/40 Material::Stainless steel 1.4581 / 1.4408; Steel C 1.0619 Temperature::-60 °C - +230°C Connections::Intermediate flange version Accessories::Metal bellows; Auxiliary contacts; Pilot solenoid valve; Stroke limitation...

...Filters are used – similar to a sieve – to retain solid particles from a gas or liquid stream. The medium to be filtered flows through a filter material that presents resistance to the particles of the medium. Not only are particles larger than the cell size of the filter retained, but also smaller particles. Special open-cell PUR soft foams are used here. These filter foams feature a so-called 'controlled pore,' meaning a defined, uniform cell size that can vary depending on the application. Special chemical or physical processes can further enhance the open-cell structure.

... F 570 eccentric screw pump in 1000 or 1200 mm, collector motor F 458-1, chemical and food-grade hose, discharge elbow, joint clamp with seal, and barrel screw connection PP. Flow rate: max. 30 l/min Lifting height: max. 50 mWs Viscosity: min. 1 mPas - max. 25000 mPas Outer pipe diameter: 53 mm Immersion depth: 1,000 mm, 1,200 mm Material outer pipe: stainless steel Container: 1000 liter IBC, 200 liter barrels...

...HDPE chemical bottle gray; thread 28; capacity 33ml Item number: 2-0604-0033-28-G Description: Bottles Width: 50.00 mm Weight: 5 g Height: 36.00 mm Material: HDPE UN approval: without UN approval Packaging unit: 1300 Volume: 33 ml Opening: 28 mm...

...seawater or chemical attack. Excellent UV and ozone resistance. Material does Impact velocity range:Max. 5 m/s Torque max.:7 Nm M12: 12 Nm Application field:Offshore industry, Agricultural machinery, Impact panels, Conveyor systems, Stacking units, Shipbuil...

...recyclable, and non-combustible. Application temperature: up to 550°C Application limit temperature: approx. 600°C Material thickness: 3 - 50 mm Manufacturing width: 1000 and 1150 mm Filament diameter: 6 - 13 µm Chemical binders: none Additional equipment: aluminum sheet foil, self-adhesive foil (as installation aid) Packaging: roll goods, cut pieces, stamped parts...

... pharmaceutical, chemical, paint, and food industries. single-walled containers made of PP dishwasher safe antistatic environmentally friendly trouble-free recycling Single-Walled Round Containers Single-walled round containers - ointment jars with screw cap (Material PP) Item No. Content Ø - Container Ø - Lid Height W10 10 g 12 ml 28.4 mm 31.1 mm W20 20 g 25 ml 33.9 mm 40.0 mm W30 30 g 35 ml...

...Under chromating, we understand the chemical surface treatment with chromate-containing or the passivation with chromium VI-free solutions. The action of chromic acid leads to the formation of complex chromic acid salts (chromates) on metallic surfaces. In this process, the base material is partially dissolved. The dissolved metal ions from the base material are incorporated into the chromate layer. This is classified as a passivation layer, meaning they are inorganic non-metallic protective layers.

...In destructive materials testing, we examine materials for their physical and chemical properties, deformability, microstructure, type of heat treatment, and corrosion resistance.

... - Food industry - Mixing systems for the chemical industry - Pharmaceutical sector - Cosmetics manufacturing - Biotechnology The miniature pressure sensors are made entirely of titanium, providing excellent corrosion resistance. The membrane, which serves as the measuring element, is machined from solid material. Its inner side is equipped with strain gauges. These convert the deflection of the...

... designed for the heaviest bulk materials – even grain sizes of up to 1,000 mm edge length pose no challenge for the machine. Depending on the design and configuration, it meets various industrial standards and is used in the raw materials, stone, earth, and coal industries, as well as in the chemical and food industries. High throughput: The powerful linear vibrating screen is designed for...

... (dynamic) — protection type IP66 / IP67 / IP69 — good resistance to many chemical substances — with metric thread from M12 to M63 Material: Stainless steel 1.4404 / AISI 316L Protection type: IP66 / IP67 / IP69 For cable diameter: 3 - 53 mm Temperature range: -40 / +200 °C...