carbon steels Germany

...electrical enclosures, and laboratory furniture. Complex inward and outward flanges can be accommodated with custom made tooling pieces. A wide range of materials can be welded, including Stainless Steel, Carbon Steel and Aluminium. Complete welded parts do not require any costly grinding, polishing or blending thus greatly saving on manufacturing costs. Pneumatic safety clamping system :No need for post weld grinding and polishing welded sheet metal plates with a 90° joint:max. welding length: 300 mm or 500 mm ...

...SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45...

...Unalloyed quality steels meet specific requirements for toughness, grain size, and formability. Structural steels have low carbon content and high toughness, while quenched and tempered steels offer high tensile and fatigue strength. Quality steels are suitable for components subjected to various loads, such as bushings, bolts, joints, gears, and shafts.

... specially alloyed steel. We produce complex forms and assembly parts with a strip thickness of 0.15 to 3.00 mm and with a strip width of up to 120 mm; the strip thickness will be dependent on the material. Strip materials: Carbon steels, Stainless steels, Cold-rolled strips, Slit strips. Non-ferrous strips: Brass, Copper,Bronze,Special alloys such as K55 or K75. Strip coatings: Tin-plated, Galvanised, Silver-plated, Gold-plated, Painted, Partial coatings, Special coatings on request.

...In order to be able to benefit from the excellent strength values of carbon steels in a heavily corrosive environment – in comparison with expensive stainless steels – Zinc Lamella Coating can be used. Our Zinc Lamella Coating generates the so-called cathodic protection. The more ignoble zinc “sacrifices” itself to protect the base material. Steel can be protected in this way. The layer...

...The EM ACE600 sputter coater is a versatile high vacuum film deposition instrument for your FE-SEM and TEM applications. Whether you need to •enhance contrast by a fine-grained metal layer, •produce nanometer thin but robust carbon films, •rotary shadow your sample to make smallest features visible, or to •move into cryo-coating, the ACE600 coater will offer the optimal solution to see more, and this every time.

Dear Business Partners, EMG, with its professional service understanding, experience, and global challenge in the steel industry as a supplier of low/high carbon steel - HR, CR, HDGI/GI, PPGI and HDAS and other products (metals and related products) as well, would like to become your reliable business partner. Therefore, in 2014, the business partners who have more than 30 years of experience in t...

...Together with our group company Nippon Techno-Carbon Co., Ltd. www.technocarbon.co.jp NKCG offers a wide range of high-quality graphite grades with outstanding features for the Electronic Discharge Machining ...

...The protective gas atmosphere required for the treatment processes is generated using nitrogen, ammonia, and CO2. Gas nitrocarburizing is a thermochemical treatment of steels in a nitrogen- and carbon-enriched atmosphere to produce a hard and wear-resistant surface layer. The outstanding properties of this process include not only a reduction in sliding resistance and an improvement in wear...

... comparable, low-carbon and stabilized, austenitic 17Cr-12Ni-2Mo steels. The wire exhibits excellent toughness of the weld metal down to -196ºC, along with very good wetting and feeding properties. Max. operating temperature 400ºC. Approval for Welding Wire Böhler Thermanit GE-316L: TÜV, DB + CE...

...Today, high-quality flange blanks can be produced efficiently, with our strength lying in the manufacturing of large rings and rings with large cross-sections. With modern heat treatment facilities, particularly for annealing large workpieces, we are able to ensure optimal material quality. We process all common carbon steels, as well as corrosion-resistant, acid-resistant, and heat-resistant...

...Manufacturing of sophisticated precision parts with complex contours according to customer specifications • Machining primarily of aluminum, magnesium, plastics, copper, brass, and special materials such as carbon- and glass-reinforced plastics of various concentrations (e.g., PEEK CF30), titanium (e.g., Ti Grade 2 / 3.7035, Ti Grade 5 / 3.7165), special steels • 5-axis simultaneous machining...

... as aluminum, stainless steel, high-alloy steels, plastics, and carbon steel. We produce individual parts, small and medium series products, as well as complete assemblies including their assembly. Another core competency is the hard machining of turned and milled parts. Through our long-standing collaboration with our renowned external partners, we can also offer you a variety of surface treatments for your products.

... be made from various metal materials, such as: structural steels, stainless steels, aluminum, plastics, glass, carbon surfaces. For this application, powder-coated surfaces are included. When using Cleaner 100/104, the following should be noted: A cleaning cloth is moistened with Cleaner 100. Subsequently, the parts to be bonded are cleaned, ensuring that the cleaning is done only in one direction (do not wipe back and forth). Depending on the degree of soiling, the parts to be bonded may need to be cleaned multiple times.

...We process all materials with sufficient carbon content (C > 0.3%), such as alloy steels, acid-resistant steels, etc., according to any desired method of induction hardening. You can have special workpieces (individual parts), as well as small and medium series up to large series and mass-produced items, professionally heat-treated with us. Almost all workpieces, such as hydraulic pistons, valve cones, bolts, wheel hubs, crankshafts, gears (single tooth, tooth root, and all-tooth hardening), as well as guide rails and machine tables, etc., can undergo professional heat treatment with us.

... also introduced for diffusion in this variant of the process. The thick compound layer generated at the surface during nitrocarburizing predominantly contains ε-carbonitrides Fe2-3CN, whose formation is favored by the increased carbon content in the furnace atmosphere. Unalloyed and low-alloy steels with low carbon content are ideally suited for treatment.

... | Mechanical Engineering | Toolmaking Material Groups Unalloyed to medium-alloyed steels and thermochemical processes Heat treatments in the field of protective gas hardening with standing and hanging charging up to 850 mm in length (depending on geometry)...

...We offer a variety of innovative methods for the stripping of PVD hard coatings on components. In this process, steels, non-ferrous metals, and plastics can generally be stripped without substrate attack. With our newly developed method for stripping DLC (diamond-like carbon) coatings, even difficult-to-strip substrates can now be processed. Short stripping times and previously unattainable stripping quality are the advantages of this new technology. Possible coatings: DLC, WC/C, AlCrN, CrN, TiN, TiAlN, ZrN...

...Effective immediately, we are offering our customers the option to purchase these as individual products from us. Benefit from our international supplier pool of qualified manufacturers. Through our in-house quality control and warehousing in Homburg, we guarantee you flawless products and high availability. We look forward to your inquiries. Materials Alloyed and unalloyed carbon steels as well...

...Strips can be custom cut to the width you need. For carbon steels and brass, the desired width is available up to 300 mm. Stainless steel strips are generally available up to 300 mm, and in material 1.4310, new production can also provide widths up to 600 mm with a thickness of up to 1.00 mm. Deburred or rounded edges are available for an additional charge. The minimum length is 50 meters, and for thicknesses over 0.80 mm, shorter lengths are also available.

...). Leaf springs are often deburred after processing through vibratory finishing. When using carbon steels, there is also the option to use already hardened material if the required geometry allows for it (risk of breakage). Otherwise, non-hardened strip or sheet should be used, enabling processing steps such as: punching, bending, and stamping. Subsequently, the leaf springs are hardened and tempered to achieve the desired hardness.

...The HÄRTEREI REESE boasts Europe's largest and most modern chamber furnace system for gas hardening. For parts with a diameter of up to 5,000 mm; or a maximum length of 5,500 mm. In this thermochemical process, carbon is deliberately introduced into the workpiece. In carbonitriding, a special type of case hardening, small amounts of ammonia are additionally diffused to treat low-alloy steels as...

... 1090 EXC 3, and ISO 3834-2, we ensure quality with experienced, certified personnel and standard quality assurance measures. We primarily process carbon steels and austenitic chromium-nickel steels, but also special materials. An overview of the materials we can weld can be found here.

...Laser cladding, plasma powder cladding, MIG/MAG processes very thin layer thicknesses up to several mm high precision complex geometries hard coatings, corrosion protection more? -> Contact Nickel-based materials on gray cast iron – crack-free welds; cobalt materials on high carbon tool steels...

... mixing work for the distribution of the reactants. 1: Variable speed via hydrostatic drive unit or frequency control 2: Product-contact materials available in carbon steel and all common austenitic steels. 3: Pressure ranges up to 50 bar 4: Temperature ranges up to 650 °C 5: Shaft seals using double-acting mechanical seals 6: Delivery with peripheral system components up to complete system solutions 7: Drum sizes available in 5, 10, and 20 liters...

... • Degassing of electric or radiation tube components • Bright- and stress-free annealing of high-temperature alloys • Sintering of high-melting and heavy metals such as tungsten • Production of high-quality fluxless braze joinings of steels, steel-ceramics and many other materials.

...Heat treatment at a high level Quenching (martensitic) is a hardening process followed by tempering at high temperatures. This results in a fine-grained structure with high strength and toughness. Steels with a carbon content of 0.22 – 0.60%C are used for this purpose. They are partially alloyed. For hardening, quenching steels are heated to about 820 – 900 °C and then quenched in oil. Tempering is done at temperatures of about 530 – 670 °C. Although this reduces hardness, it significantly increases strength.

... PTFE inserts) Standard materials of the sliding plate with chambered PTFE inserts for welding: Unalloyed structural steels according to EN 10025-2 S235JR Other materials available upon request PTFE (Polytetrafluoroethylene) is a thermoplastic high-performance plastic, a polymer made of fluorine and carbon with a very low coefficient of friction. Due to its excellent non-stick properties, PTFE has outstanding sliding characteristics (very low coefficient of friction). PTFE has excellent UV and weather resistance, as well as high corrosion resistance. Temperature range of use... Country of origin: Germany...

...Welcome to the blog of KB Schmiedetechnik, a German drop forge specialising in small batch production of closed-die forgings up to 130 kg in unit weight, crafted from virtually all steel grades—carbon steels, high- and low-alloy steels, including AISI 316 and duplex stainless steels, as well as nickel-based superalloys such as Monel®, Incoloy®, Inconel®, and Hastelloy®, along with titanium...

...Hastelloy, alloy, copper, bronze, high-performance plastics, technical plastics, foils, seals, rubber, foams, composite materials, carbon, textiles, and much more. Laser Melting: Laser melting enables the production of complex workpieces that cannot be manufactured at all or only with significant (manual) effort using other production methods. Delicate lattice, mesh, or net structures, porous structures...