Results for

Moulds for back-injection moulding - Germany

16 Companies

21 Products

STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
SAXONIA-FRANKE GMBH & CO. KG

Germany

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Website
BIEGLO GMBH

Germany

BIEGLO is a distribution company for high-performance plastics based in Hamburg, Germany. We are the exclusive distributor of polyether ether ketone (PEEK) CoPEEK from Panjin Zhongrun and sell polyimide (PI) Meldin® from Saint Gobain and (TPI) AURUM® from Mitsui Chemicals. Our range also includes polybenzimidazole (PBI), polyamide-imide (PAI) and polyetherimide (PEI). We also recycle. We buy back clean, sorted PEEK scrap. International operations are important to BIEGLO. We have many foreign customers, and can now draw on an international network of suppliers to deliver our popular products. BIEGLO also operates a number of online shops: PEEK-shop.de, PI-shop.de, PAI-shop.de, PBI-shop.de and PEI-shop.de. Our CoPEEK comes from Panjin Zhongrun in China. We offer it as either granulate or powder in different viscosities. Our range also includes semi-finished products in PEEK, including plates, tubes, rods, filaments and films. Meldin® PI is supplied by Saint Gobain and manufactured in the USA. We supply Meldin® semi-finished products in the form of plates and rods, as well as direct formed parts. AURUM® thermoplastic polyimide from Mitsui Chemicals in Japan is the thermoplastic with the highest glass transition temperature (Tg) of 245 °C. We offer PBI and PBI PEEK compounds made from Celazole®. Products in the Celazole® T Series are PBI compounds developed for injection moulding and extrusion.

Website See all products
SEILEREI KÖSTERS GMBH

Germany

SEILEREI KÖSTERS GMBH – YOUR SPECIALIST FOR PASTURE/ELECTRIC FENCES AND ROPES MADE OF DIVERSE MATERIALS. Seilerei Kösters GmbH originated from Ludger Kösters oHG, and looks back on centuries of experience in the production of rope products. We have focused on the production of electric pasture fences and expanded our expertise in this segment. Seilerei Kösters is one of the leading manufacturers in Europe. In 1999, the company was acquired by Susanne Else. The company headquarters was relocated to Emmerich, where a new and larger production facility was erected. Our product range: Electric pasture fences, wires, ropes and tapes, ropes made of PE, PP, cotton, hemp, Sisal and Spleitex, packaging string/twine, injection-moulded products (e.g. insulators, coils). Our product range covers all basic, standard and premium requests. We take individual customer specifications into account, and are happy to manufacture according to customer requests. We give advice about developing your own product lines – benefit from our decades of expertise and experience. Our company headquarters is in North Rhine-Westphalia, close to the border with the Netherlands, and has ideal transport connections – by rail, road and water. We ship our products punctually throughout Europe and all over the world. Our objective is to produce the highest quality at appropriate prices, guarantee fast and constant supply capability and increase the satisfaction of our customers.

See all products
FRIEDENSTAB KUNSTSTOFFTECHNIK GMBH

Germany

Do you have an idea? We have just the solution for you. Together with you, we work out the right overall package, and support you from development to series production of plastic components! Our core skills: Plastic products made using injection moulding and extrusion processes and all related services with committed and reliable customer service "Made in Germany". Since 1949 we have been a family business, and are now in our fourth generation. Thanks to fair treatment of our customers and suppliers, we can be proud of a number of partnerships stretching back several years, and will put the utmost effort into maintaining these in the future. We stand for commitment and quality that's "Made in Germany". Sustainability is an especially important subject for us. For this reason, 100% of the electricity we use is from renewable energy sources. Our energy requirements are met by certified hydropower and our own photovoltaic systems (180kWp)

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

VWH GMBH

Germany

Tool and mould construction is an additional mainstay of our business. Our focus in this area is on plastic injection moulds for sophisticated technical parts. Our more than 30 years of experience in this area form the basis for innovative ideas, professional production and smooth implementation of projects. Insert and outsert injection moulding technology and sampling of injection moulds are part of our standard services, and our in-house injection moulding shop enables us to react spontaneously to your requirements. We can develop 0-series, prototypes and pre-series at very short notice. VWH offers a diverse pool of skills, ranging from development of initial ideas and designs to the production process through to packaging management. This enables us to ensure project support right from the very beginning. This is beneficial both for the customer and for the end product.

Website
BWF KUNSTSTOFFE GMBH & CO. KG

Germany

Founded in 1956 and employing a staff of more than 400 at our sites in Offingen, Geretsried and China, we process high-quality plastics to create profiles, plates, optical films, pipes, deep-drawn parts and injection moulding parts. BWF Profiles is the European and Asian market leader in the extrusion of plastic profiles, plastic pipes, plastic plates and optical films for use in fields such as lighting, illuminated advertising, POS/display and bus & train. The product portfolio is complemented by high-quality deep-drawn and injection moulding parts produced by our subsidiary, BWF Thermoforms. Thanks to innovative manufacturing facilities and continuous research & development, we guarantee our customers a decisive technological advantage. We accompany you through the entire development process, from the design stage through prototype production to the end product ready to be installed.

Website
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Germany

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Website
WETEC GMBH

Germany

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

Website
WILHELM-PLASTIC GMBH & CO KG

Germany

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Website See all products

ZIMMER GMBH KUNSTSTOFFTECHNIK

Germany

Development, prototypes, mould construction, series production, tool transfer. We take care of you at every stage of your project. The all-round, carefree package. In the age of digital transformation, we at THE KNOW-HOW FACTORY accompany our customers worldwide on the road to technological excellence. We see ourselves not only as a technological leader and one-stop manufacturer of hardware and software, but also as a competent research and development partner. The Zimmer Group stands for family business, passion, innovation, stability, know-how and vision to ensure our customers’ growth as a future full-range provider.

Website See all products
ERLEMANN & HUCKENBECK GMBH & CO KG

Germany

Erlemann+Huckenbeck is a manufacturer of technical mouldings in thermoset and thermoplastic. Some 48 employees work in Radevormwald on more than 50 production machines in the field of plastics processing. With our own tool-making facility and extensive vertical integration at the German site, we are highly flexible in producing customer-specific solutions and series production. High quality standards and reproducibility are a key focus for us. From CAD design to finishing: Erlemann+Huckenbeck ensures efficient production of pressing tools or injection moulding tools.

Website

JÄGER-PLASTIK GMBH & CO. KG

Germany

Jäger-Plastik GmbH & Co. KG is an established manufacturer of handles for the packaging industry. For more than 40 years, we have been producing high-quality carrying, bow-shaped and hooked handles, as well as custom handles according to customer requirements. Our main business concentrates on the manufacture of handles in various shapes and sizes, although we also offer the opportunity to develop new handle designs together with our customers. Our specialisation in the processing of recycled materials, which enables us to guarantee sustainable production, is particularly noteworthy. Bottle cap materials in grey and blue, which are also made from recycled materials, are new to the range. Thanks to our modern injection moulding machines, we can guarantee fast delivery times and flexibly fulfil customer requirements. Another advantage is that our products are certified in line with the 'Blue Angel', which offers our customers additional sustainability benefits.

All the products for "moulds for back-injection moulding"

DTI / ISO – twin handles – oval PCR

DSV – Fruit bag handle – safety lock

POG / Oval – twin handles – oval PCR

Website See all products
GOLDEN COMPOUND GMBH

Germany

Since being established in 2014, we have acquired a wealth of experience in injection moulding and extrusion and have developed our own products such as home-compostable coffee pods and plant pots which are biodegradable in soil. We are a leading compounder of biocomposites containing sunflower seed shells. Our key products provide innovative solutions for injection moulding and extrusion. GC pro combines sunflower seed shells with standard polyolefins to make the materials more eco-friendly and to reduce the use of plastic. At the same time, the material is 100% recyclable. With GC green, we focus on biodegradable bioplastics which are used in our granules, coffee pods and plant pots. We have verified the biodegradability of many of our compounds and products with the "OK Compost Home" or "OK Biodegradable Soil" certificates issued by TÜV Austria. As a partner, we also offer you comprehensive project support and synergy effects with other manufacturers. Our long-term vision is to reduce the amount of plastic brought onto the market and replace it with biomaterials. We prioritise honesty, transparency and sustainability in all of our business activities. As a pioneer, we use waste products from the food industry to reduce environmental pollution. We are proud to offer innovative solutions and make good use of waste materials. Get in touch with us and play your part in a sustainable future with Golden Compound

All the products for "moulds for back-injection moulding"

GC green M2571 7G3 A

GC green 3082 MIF T13

GC green 3071 MI T6

GC green 2082 MI

GC green 3092 MIF

See all products
POLY-TOOLS BENNEWART GMBH

Germany

More than 40 years' experience in tool manufacturing. Our accumulated company expertise forms the basis of our product consultation, tool design and outstanding product quality. Alongside product design and prototyping, our services include developing the mould and tool, as well as producing the tools. Thanks to our high demands for materials and personnel, we achieve outstanding tool quality (QUALItools).
JETMOLD GMBH DEUTSCHLAND

Germany

The company JETMOLD GMBH DEUTSCHLAND, is a Manufacturer/ Producer, which operates in the Moulding, rubber - machinery industry. It also operates in the injection moulding, tool manufacturing, and injection moulds industries. It is based in Empfingen, Germany.

Find quotes for

Filters

Results for

Moulds for back-injection moulding - Germany

Number of results

16 Companies