mould for casting Germany

...The casting resin system consists of two acrylic resin components and a filler. Our molds have a temperature resistance of 135°C (short-term loads up to 180°C are possible). All the advantages of ALWA MOULD D / ATLAS M 130 at a glance: • Fast curing in about 50 minutes. • Good pourability • Casting without air inclusions • Good mechanical post-processing • Post-curing not required • High...

...Water-based special release agents in various concentrations for low volume spray application Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • castings are particularly suitable for the "bonding and welding" joining processes • products can be further diluted • effective reduction of "metallization" (metal-to-metal bonding) • exceptional release effect with good lubrication of ejectors and slides...

...Die-casting, die-casting molds, die-casting tools, die-cast parts, die-cast parts made of zinc and zinc alloys, die-cast parts from zinc alloys, die-casting with zinc, die-casting parts, die-cast parts made of magnesium, magnesium die-casting, magnesium die-cast, magnesium die-cast parts, aluminum die-casting, aluminum die-cast parts, aluminum die-casting, zinc die-casting, zinc die-cast, zinc die-cast parts, zinc die-cast parts, zinc die-casting, magnesium die-casting, aluminum die-casting Chinese price, Chinese speed, best service = Runbond Mould...

...Thread inserts for aluminum die casting With HELICOIL® Cast thread inserts, you can create threads in aluminum materials using the in-mould process.

... the medical field, as cliché adhesive tape in the printing industry, or as in-mould labels, the possibilities for use are virtually limitless. Outstanding properties of the films include balanced strengths in both the longitudinal and transverse directions, good toughness, and tear resistance. According to your requirements in the end application, our films can be equipped with additives, for example, for UV stabilization or to improve surface adhesion. Modification of the films through the use of various fillers is also possible.

...With our highly qualified team of experts and state-of-the-art technology, we manufacture precise and production-ready injection and die-casting molds for you. We produce for you: • Molds up to 800x600, designed for plastics, rubber, and die-cast parts • Development of items to production readiness • Multi-cavity hot runner tools • Repair / maintenance / modifications • Pre-series and prototype tools • Fixtures...

...We focus on technologies in wire and sinker EDM with our own electrode manufacturing, hard milling & HSC machining. We have many years of experience and high-precision manufacturing capabilities for the production of complex tool components such as: • Form plates • Punches • Slides • Dies • Scrapers • Ejectors • Tool assemblies • Contour inserts • Cores for injection molding / die casting and cutting tool manufacturing.

...-standard aluminum alloys, which offer maximum stability and long-lasting corrosion resistance with low weight. Custom-made products We are also experts in the development and manufacturing of special parts made from aluminum casting. For example, we are specialists when it comes to components for the interior fittings of rail vehicles: From trash can lids to hinge systems for folding tables in the ICE – our designers find a tailored solution for every product request. Other industries also trust our many years of expertise.

...- High process competence through over 40 years of experience - Secure handling as a German legal partner - No risk due to drawing-compliant products and ISO certifications - Expert advice in every casting and forging process - Optimal resource availability through an international production network - Maximum cost-effectiveness through optimal resource planning - Pre-financing and storage of the entire annual requirement - Just-in-Time delivery from our warehouse in Leonberg near Stuttgart, Germany Contact us - we are always happy to advise you. Because precision is just the beginning!

Our foundry has a long tradition, dating back to the machine factory Schütz & Hertel, founded in 1879, also known as Mafa Wurzen. This was followed 74 years later by the company VEB Maschinenfabrik und Eisengießerei Wurzen, which transitioned into the ownership of Esterer AG in 1991 and has since operated as "Esterer Gießerei Werk Wurzen GmbH". Together with the sister company in Altötting, "Este...

Our company processes copper casting alloys according to various standards using the manufacturing methods of sand casting, centrifugal casting, and horizontal continuous casting.

The iron foundry Funk produces demanding, complex cast parts in the field of single, small, and medium series production and offers a wide range of high-quality casting products.

Over 100 years of quality in one piece… www.pinterguss.de Pinter Guss has been a medium-sized foundry for ALUMINUM and COPPER alloys since 1907. We cast using gravity casting methods such as SAND CASTING, DIE CASTING, and TILT DIE CASTING in dimensions ranging from 0.1 to 1,500 kg and up to 3,000 mm. Our focus in the aluminum sector is on machine-formed small to medium series as well as hand...

...mills, and lapping. An important core competency of Gontermann-Peipers lies in composite casting, the combined casting of several materials into an integral component. In these processes, the different material properties of the raw materials (e.g., wear resistance and strength) are optimally combined for functionality.

The company LBI Guss GmbH is the sales organization of the LBI Foundries group for Germany and Austria. The LBI Foundries group consists of the business units LBI for centrifugal casting products, SRI, and Inoxyda for non-ferrous metal sand cast parts. LBI is a centrifugal casting foundry for non-ferrous metals and stainless steel. The company LBI manufactures and processes rings, pipes, flange...

The Gattermann Foundry has been synonymous with sophisticated casting technology, reliability, and the highest quality for over 80 years. Our philosophy is: Whether it’s about the production of individual pieces, small, medium, or large series, Gattermann is a reliable partner for gray or ductile iron casting as well as for the subsequent processing of the workpiece – our numbers and facts speak...

... beards, sleeves, Chari Vari, walking stick nails, and devotional items. Production in small and large series of: - White metal parts (up to 55cm) - Metal stampings - Miniatures - Jewelry parts - Technical parts We have been specializing in the manufacture of metal stampings and centrifugal casting since 1905. We place particular emphasis on the realistic representation of our models. The complete...

Specialized in small parts zinc die casting, in medium to high quantities as well as assembly of components. Manufacturing of our own designs, product development, tool making, logistics, and packaging; external galvanic finishing.

CONTINUOUS CASTING OF ALUMINIUM In a vertical equal-level aluminium continuous casting process, we cast round billets up to 6,400mm in length and seamed at both ends. The dimensions range from a diameter of 178 mm to 696 mm, also independent from the alloy and number of strands. We are highly flexible when it comes to changes in alloy and formats and respond to short-term orders. Aluminium is...

...Later, markets in Asia were tapped into. A brisk trade in cast and forged parts developed rapidly, and an international customer base grew. Today, Guss-Ring is considered one of the most reliable suppliers of finished and often surface-treated cast parts for numerous economic and industrial sectors. Companies from the automotive industry, international automotive suppliers, drive technology...

... Repro Department In-house production of - screen copies - clichés - pads Employees: Skilled professionals with qualified training and several years of experience Employees who have been specifically trained for individual tasks Currently, around 18 employees are permanently employed with us, and additional employees are temporarily hired. Training: Since September 2000, we have been training in the professions: Screen Printer (optional modules: body screen and pad printing) Office Clerk Quality Standard: We are certified according to DIN EN ISO 9001:2000 (DQS)...

... range of applications and suitable solutions for various uses - for lifting and lowering loads of all kinds, especially as stage, banner, and passenger transport winches, but also for use in and on water, e.g., in offshore, port, and ship cranes. Our in-house, modern foundry enables outstanding manufacturing depth, ranging from the production of the material cast iron through all steps of shaping...

We manufacture wooden boxes tailored to your specifications in various dimensions, designs, and types of wood, starting from a minimum order quantity of 100 pieces.

ACO Guss GmbH, as a specialist in iron casting, is one of the leading foundries in Europe and has a long and knowledge-rich tradition in casting.

...High-quality non-ferrous metal cast products produced using extrusion, centrifugal, and die-casting methods. Our production includes round bars, tubes, square bars, flat bars, hexagonal and octagonal bars, as well as special profiles made from copper alloys (red brass/bronze) according to EN 1982:2008 and special alloys. We also manufacture fittings made from brass - die-casting and thermoplastic plastics.

Trust us! We implement your wishes and the associated high demands with well-thought-out overall concepts. We offer you solutions that are precisely tailored to your needs. With creativity and precision, we carry out your requests from conception, through production, to shipping. We continuously work on optimizing our production processes in each department to enhance our effectiveness, allowing u...

... standards. We manufacture cast iron for various sectors such as automotive, mechanical engineering, heating and wastewater technology, engines, gearbox construction, industry, mobile hydraulics, railway technology, pumps, and valve manufacturing.

Precise craftsmanship, in-depth consulting: Knecht-Druck GmbH was founded by Otto Knecht in 1926. Since then, we have remained true to our philosophy of providing our customers with not only high-quality printed products but also comprehensive professional advice. This concept is supported and lived by our dedicated and motivated employees. We always stay up to date for you. Knecht-Druck GmbH is...

Printed products, digital and offset printing, single printed products, menus, enhancements...

Letterpress, letterpress printing, Boston style, offset printing, hot foil stamping, blind embossing, elegant business cards, high-quality invitation cards...