metal caps Germany

...The ALL51 is a monobloc multipurpose machine for cough syrup, eye drops, nasal sprays, and more, with a capacity of up to 50 ppm. The AL51 is a robust, compact monobloc driven mechanically via cams and servo motors, featuring two rotary tables. It can be used for a wide variety of small bottles with different closures, such as metal caps (crimping). Various stations are available for filling and...

...The insulation dowels VT consist of a polypropylene dowel with a large holding plate and a galvanized metal pin with various colored plastic caps. The color of the cap indicates which dowel length has been installed. The holding plate has a diameter of 62 mm and prevents the formation of thermal bridges and condensation. Due to the perforated head, subsequently applied plaster adheres...

...Wiesner Sealing Technology & Engineering is a long-standing supplier to the pump and valve industry. We offer you a large and versatile range of pure graphite seals and products, including: Pure graphite rings - in all common ring shapes (see below) - cut or split - wrapped with stainless steel foil - with metal caps - with inner and outer bevels Pure graphite rings available in industrial...

...We manufacture glass tube levels in standard sizes of d 6, d 7, d 10, and d 12. The glass tubes are sealed with metal caps that are 0.65 mm larger in diameter than the glass tube. Therefore, a tube level with d 12 has metal caps with d 12.65. We are also happy to produce glass tubes according to your specifications. We offer acrylic tube levels in the following dimensions: Round • d 7 x 16 • d 7 x 25 • d 10 x 25 • d 10 x 30 Square • 29 x 10 x 10 • 36 x 15 x 15 • 40 x 15 x 15 • 55 x 15 x 15 with 2 continuous mounting holes...

Graphite Cova is at the forefront of industry technology today. The main share of production consists of the manufacturing of graphite electrodes. Graphite Cova is the only provider worldwide of a coating for graphite electrodes based on aluminum, graphite, and other components, which allows for a consumption saving of up to 15-25%. The Graphite Cova products are tailored to the technical require...

Founded in 1966 in Willich, Germany, originating from Carl Aug. Rothstein AG, which equipped the first WC flushing cisterns with valves more than 90 years ago. Millions of float valves made from brass and plastic components have since been supplied to the building and industrial technology sectors of sanitation, climate control, agriculture, food, and chemical industries. In addition to the patent...

... just as happy to create individual pieces and prototypes for you as we are to produce protective covers or coverings in series. Industrial and commercial customers can always rely on our service. With decades of experience in plastic processing for machine and metal construction as well as for technical objects, we are the right contact for you. We manufacture the covers in your desired size and quantity. There are no limits to size and quantity. Covers: Drywall Elements Protective Covers: Dry Construction Box Covers: Construction Elements...

...Manufacture technical plastic parts in large quantities and with high precision Injection weight currently from 0.4 g to a maximum of 1,000 g (PS) Injection molded parts made from thermoplastic materials, including transparent options Processing of all common plastic types (no PVC) Use of metal replacement materials Machining tools 2K technology Overmolding of insert parts...

...When it comes to creating the caps and closures our customers want, Novelis aluminum sheet and coil provide two distinct benefits – shape and appearance. Since aluminum packaging is strong but easily shaped, Novelis is able to produce innovative, customized shapes for caps and closures, as well as threading to make the aluminum containers resealable. These products can also be treated with a range of advanced decorative technologies including lithography, hot-foil and positive and negative embossing.

...Buttweld fittings according to ANSI B 16.9 Extensive stock range in special materials We can deliver Buttweld Fittings in numerous dimensions and materials directly from stock at short notice. Pipe bends with different radii (seamless and welded), T-pieces, reducers and caps essentially make up the product groups Buttweld Fittings (buttweld fittings). We only deliver goods of European origin...

...The dome embossing increases the surface area. This cold forming of the metal slightly hardens the structure and makes the foil more stable. This applies to both the dome and the large dome. Through the subsequent process of micro-perforation, we can expand the range of applications, including for acoustically effective components. The varying hole density in conjunction with the dome structure improves the absorption of disturbing noises, for example, in the engine compartment.

...Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.

...flanges, bifurcations, hose pipes, and forged boiler parts like header caps, end pieces, manifolds. KB produces forgings for high pressure applications according to ASME, PED, KTA, RCCM. closed die drop forgings:up to 130Kg unit weight Length:600mm all steel grades and special alloys:carbon and stainless steel, superalloys high alloyed special steel and superalloys:Monel®, Incoloy®, Inconel®...

...plastic or metal handles can be positioned for labeling. Optionally, the labeling system can be expanded with additional labeling stations to apply a cap label if needed. For dual-sided labeling, we recommend the VEE-2S model. If a full wrap labeling is required, our VEE-2DS model is used. A combination of both systems is easily possible. Additionally, we offer an optional cap closing unit (DVS) that presses the already placed caps onto the containers during the labeling process.

...The MD200, manufactured by Trotech®, is a magnetometer suited for covered ferromagnetic metals locator such as valve caps and rods, hydrants, metallic manhole and tank covers, and the like. It is designed for environments like in the blazing heat, bitter cold, under water or in the snow to supply a location results that is accurate. It comes with a benefit of a covered ferromagnetic metal with a...

... internal components of the lid. It already includes a cavity for housing membrane keypads, front plates, or for the installation of control panels. On the back, the screw channels will be covered with closure caps that will also serve as edge protection. There are numerous mounting domes on the top and bottom for the installation of the intended internal components. Mounting plates, compatible cable fittings, and additional accessories are also available. EN AC-44300 DIN EN 1706: Aluminum...

... glass-ball reinforced, black Material selection tubes: — Carbon fibre, glossy finish — Aluminium, anodised — stainless steel — Steel plastik covered Strip handle Material selection handle strip: — Aluminium Material selection cover caps: — PA glass-fibre reinforced plastic Other sizes, other colors on request...

...with aluminum tube, tube diameter 20 mm PLACOGRIP® machine grips for maximum loads END CAPS Reinforced polyamide Black or orange Other RAL or special colors available upon request TUBE Anodized aluminum, other surfaces available upon request Special lengths available upon request Fastening materials available upon request...

...Caps and stampings we can deliver the most diverse materials. Size, type and form are in this case matched to the customer's wishes and are manufactured according to customer drawings. Sit down just contact us and we will help you in designing a suitable product for your needs. Tubes and tube sections By combining different materials, the applications are widely held. These range from the...

... for particularly high environmental requirements. Housing material: Plastic, metallized plastic, metal Design: Installation housing set, inline coupling, connector set, patch cables, protective caps Locking: Bayonet, M28 Mounting type: Front, rear wall mounting Special features: UV-resistant, weight-optimized variants available Connection type: Solder, IDC, screw connection Shielding: With/without shielding Connector type: RJ45...

... powder-coated or polished high-gloss chrome-plating - snap-lock PULL made of metal - plastic slide caps for safe standing - plastic staking buffer with added rubber which allows the tables to be stacked without slipping Selection options: - table top color - dimension - frame color We offer the following discounts: 10+ pieces 5% | 20+ pieces 8% 50+ pieces 10% | 100+ pieces 15% If you...

...We can offer you T-pieces as well as reducers, caps, saddle pieces, and other fittings.

... - Xtreme rare earth circuits for up to 150 °F, 250 °F, or 400 °F - Available Alnico circuits are suitable for temperatures up to 1200 °F - Rod magnets can be manufactured with the following ends: - Stainless steel end caps with 1/4 inch-20 drilled and threaded ends - 1/4 inch-20 stainless steel threaded bolts, 1/2 inch long - Stainless steel blind caps with Heliarc welds - Stainless steel end caps - Other ends available upon request...

...- Available with 3 runners - Ideal for light to medium loads - With an outer edge of 22 mm, the D1 has interior dimensions of 1200 x 800 mm for use with box and blister systems - Approach bevels on both sides on all runners Options: - Corrosion-resistant reinforcement profiles - Variants of outer edge: none, 7 mm, 22 mm outer, 22 mm top - PopUps for safe stacking of empty pallets (with the version without edges) - RFID transponder - Anti-slip caps from the top side to the bottom of the cover...

... curing • No unpleasant odor Product details: Araldite METAL 2K EP epoxy resin adhesive with a mixing ratio of 1:1 Color (mixed): metallic gray Viscosity: 200 Pa.s Processing time for 24g at 23 °C: 5 minutes Handling strength at 23 °C for shear strength (ZSF) 1 N/mm²: 45 minutes Tensile shear strength (ZSF) on aluminum at 23 °C: 16 N/mm² Maximum temperature leading to a ZSF of 5 N/mm²: 80 °C Packaging: 2 x 15 ml tubes with caps and spatula Item number: ARA-METAL-2X15 Net weight: 0.03 EAN: 4260534181514 ml: 30...

...We manufacture a wide range of vessel heads to works standards, both for construction purposes and as dished vessel heads in the form of torispherical heads, elliptical heads and caps for pressure applications. Applications are very varied – ranging from candleholders to pipe end-pieces or pressure vessels in equipment construction. And if a central hole is needed for connections, this can also be provided.

Schütz Messtechnik is an experienced and qualified company that has been operating as a service provider and device manufacturer for energy supply companies for over 40 years. In the service sector, Schütz inspects public gas pipeline networks according to DVGW rules G 465, G466/I, and G 466/II, is involved in leak and line detection, and carries out meter changes. Additionally, specialized semina...

...Robust housing made of lightweight stretched metal. Stainless steel push button (1.4305). Impact entry with sealing gasket. Durable conductive plastic resistance rail. Slide with precious metal coating. Nylon 66 G25 caps. No signal change in the area before and after the stroke. Interface: Potentiometric Measurement ranges to order: 25-300mm...

...Plugs are generally used for sealing, as well as for covering and closing in various applications. Particularly in the automotive industry, plugs are used for sealing cavities, for example. They are also used as metal closures, end caps, and for sealing holes and threaded holes. Furthermore, they are suitable for vibration and transport protection. The application possibilities of this rubber...

...Parade helmets, also known as pickelhaube, crafted in the traditional style from lacquered leather, are a specialty of our company. The decorative applications are made using original metal tools, distinguishing them from galvanic emblems. The entire helmet is handcrafted in the traditional manner and is characterized by its high quality.