measuring technology (service) Germany

...We would be happy to check the dimensional accuracy of your components in-house. LT Ultra-Precision Technology has a large number of high-precision measuring devices in precisely air-conditioned measuring laboratories for testing its own products, on which we also carry out contract measurements.The following measurement technology is available:High-precision coordinate measuring...

...3D Scan Service with the latest measurement technology (GOM ATOS 5) high-precision data in a short measurement time 12 million measurement points per scan Blue Light Equalizer high detail resolution low noise...

...Our calibration technology is continuously developed in parallel with our flow and flow sensors. We calibrate on numerous test benches equipped with state-of-the-art measurement technology. The calibration of all measuring devices is carried out in accordance with a certified quality assurance system according to DIN EN ISO 9001. The DAkkS accreditation of our calibration laboratory for the...

...Redundant twin measuring system where there is a requirement for increased operational safety for sewage pumping stations (e.g. main pumping station) in building service engineering and for municipal applications. Product features The twin measuring system MWAS-BN uses two mutually independent measuring systems which work in different ways. The analogue sensor AS for integration in the pump control unit is combined with the pneumatic-mechanical contact sensor system MB. If one of the two measuring systems fails, emergency control is automatically triggered by the other measuring system. ...

... of surfaces in playgrounds, gyms, or climbing halls. We are also happy to offer you the systematic and certified testing of your surfaces as a service. Sensor Technology: Triaxial accelerometer, gyrometer Data Interfaces: WiFi, USB Handling: mobile, by one person Power Supply: AA batteries or via USB...

...For the precise surface measurement of your optical lenses, prisms, and flat surfaces, we offer our measurement service using state-of-the-art measurement technology. We measure all relevant parameters such as radius, PV value, focal length, and tilt angle error. For prisms, we can additionally measure the deviation in arc seconds and flatness. For flat surfaces, we are capable of measuring...

...The VeEX ™ VePAL TX300S/TX320s is a multi-service testing solution for OTN, SDH, SONET, PDH, DSn, mobile backhaul networks, as well as for LAN and WAN + OTDR functionality. Equipped with SyncE, 1588v2 PTP, and CPRI/OBSAI testing capabilities, the TX300s offers unprecedented synchronization and troubleshooting testing functions for mobile operators that have already deployed 4G LTE. The TX300s...

...In addition to the pilot plants, helicopter modules have been developed that allow for the simultaneous testing of membranes with different separation thresholds under identical experimental conditions. Service To meet specific requirements, we offer support in developing customized solutions for filtration and separation tasks, which are tested in our pilot plants. In addition to the pilot...

...8 analog inputs for sensors (4-20mA) Data logging autonomous power supply Integrated electronics Evaluation software for PC Also take advantage of our cost-effective evaluation service.

...Testing laboratory and calibration facility of the German Calibration Service (DKD) for length, based on DIN ISO EN/IEC 17025...

... overload-resistant ceramic membrane for a long service life. The flush-mounted membrane allows for easy and safe on-site cleaning. The level probe is supplied with pre-configured measuring ranges from 100 mbar / 1.5 psi to 10 bar / 150 psi. Custom measuring ranges are available upon request. The corrosion-resistant TPE cable is approved for use in drinking water applications. The OPTIBAR LC 1010...

...The MF-CO type sensors are used for measuring toxic carbon monoxide in underground garages, parking facilities, and loading halls. Measurement gas: Carbon monoxide Signal transmission: Analog measurement signal, 4-20mA Connection technology: 24V DC (+), 4-20mA (GND) Calibration: All controls on the sensor, manual adjustment of zero point and gain directly on the sensor possible, microprocessor-controlled sensor calibration Signal generation: Via electrochemical measuring cell...

... reliefs, mounting brackets Typical industrial sectors and applications Production and processing of semiconductors Optics Automatic insertion machines Materials handling technology Measuring technology Printer and plotter Clean room application General mechanical engineering iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s...

... evaluation elements - Handle worker, admin, and descriptions - Up to 50 most recent measurements available for display and analysis - Records and evaluates a forward and return curve - Live sensor values provided to the Fieldbus interface - Synchronous measurement data notation using DigiControl PC software for - multichannel applications Controlled function: monitoring, force Type / technology: digital, electrical Applications: multi-service Product applications: production Other features: automatic, high performance...

...Whether maintenance contract or individual maintenance, whether in-house or third-party products – you determine your service level. State-of-the-art testing and measuring technology, along with short repair times, guarantee minimized downtime and reduce cost pressure.

... testing. Due to its highly reliable performance, it’s often chosen by R&D departments or commercial Service Test Houses. 1x 2200 W air-cooled Xenon Lamp 1320 cm 2 exposure area High-irradiance testing up to 180 W/m 2 (3 Sun) Touch screen with colour display to monitor and display test parameters Direct Setting and Control of Irradiance (300-400nm) Direct Setting and Control of Black Standard...

...The T660 is a moisture meter that you can connect to a PC with the use of a USB cable. The MultiMeasure Studio Software, free in the service/ download section of company website, can be used to measure values from the T660, online and in real time on any PC. The values of this item can be saved for later analysis and for use in report. There are a few practical benefits, with the measuring device...

... with a diffuser, which enables the absolute measurement of irradiance and which ensures the required cosine correction during a non-perpendicular irradiation. The UV probes are, together with the radiometers, traceably calibrated to the PTB, recalibratable and are supplied with a calibration certificate by the factory. By using appropriate materials, an outstanding long-term stability is reached. A repair service and parts supply is of course available for many years. Diameter, probe:Ø 6 mm Length, probe:15 cm or 30 cm Weight:~ 200-350 g Operation temp., probe:0 to 200 °C...

... are just a small selection of the systems produced by Friedrich. In close collaboration with our customers, requirements are discussed and solutions are designed. The construction is carried out using the latest CAD technology. In-house manufacturing on modern CNC machines and assembly by experienced staff enable a timely implementation of the design into a high-quality product. From development to delivery, the customer receives everything from a single source. A well-functioning after-sales service ensures a high utilization rate of the machines.

...The Sensistor ISH2000 is a robust instrument for professional leak detection, both manual and automatic. The unique method involving the use of inexpensive forming gas (5 % hydrogen and 95 %nitrogen) as tracer gas. This combines unmatched measuring properties with user-friendly technology, low costs and minimal service requirements. This makes the Sensistor ISH2000 the best option for a wide...

...3D Measurement. Inspection Reports. Area Return. 3D Measurement Technology. STURM® is one of the leading service providers in the field of digital coordinate measurement technology in Germany. Depending on the application, we utilize the most suitable 3D measurement technology. On-site services are also available upon request. Our range includes not only optical 3D measurement technology, 3D laser scanning, and industrial computed tomography, but also all digital technologies related to coordinate measurement.

...Digital High Voltage Meter - HVM40B. Technical Specifications: Measures 500 to 40,000 Volts DC, Large LED display, Advanced solid-state design, Dual range switch provides increased resolution for measuring voltages below 20 kilovolts, Extremely high input impedance (10 giga-ohms) minimizes circuit loading, Retractable Flip Feet (standard), Retractable Tilt Handle (optional). Applications: Laboratory Measurements, Troubleshooting HV Circuits, Static Power Supply Monitoring, Electrostatic Air Cleaner Service and Maintenance.

...Flue Gas Analyzers for Easy Emission Analysis DRÄGER Flue Gas Analyzers – Emission analysis made easy • EN 50379 Part 1 + 3 • EN 50379 Part 1 + 2 • BimschV + ZIV KÜO • Heating Check • Approved for suitability • Authorized for official measurements We offer you the right solution and competent service for your measuring devices.

...The LMK 458 has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 125 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458 is a capacitive...

...Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this...

...A calibration serves to check a measuring device to see if it measures the correct values. For this purpose, a comparison of the target and actual values is conducted using a traceable reference device. In all areas where sensitive measuring technology is used, such as in the production of sensors, calibration of the devices employed is necessary. Only in this way can quality standards be ensured...

... and evaluated for measurements. Tasks that were traditionally handled by tactile 3D coordinate measuring machines can be performed with the photogrammetry system without the need for cumbersome, heavy, and maintenance-intensive...

... measurement technology, especially in the construction of plants where utmost precision is required. Flexible for strips up to 9 mm thick / 32 mm wide Tactile measurement is used in all process stages of strip production – during pickling as well as rolling, in adjustment or strip treatment, and also in steel service centers. Vollmer supplies the systems in various designs. Optionally, the...

...Ensure the high precision of BlowerDoor measurement technology through regular calibration of pressure measuring devices and measuring fans. The accuracy of the pressure measuring devices (± 0.9% or ± 1%) as well as the accuracy of the measuring orifices significantly exceed the legal minimum requirements. Both factory calibration and calibration with DAkkS certification are subject to high...

...Using high-quality measuring technology, Baumüller service technicians conduct both complete system tests and functional tests on individual components.