Results for

Used machines - Manufacturer Producer - Germany

64 Companies

250 Products

Product recommendations

Germany

Germany

Germany

Germany

See more products

ELT ENTSTAUBUNGS- UND LUFTTECHNIK GMBH

Germany

Our aim is not only to identify each individual technical task but also to work towards comprehensive solutions while keeping cost-effectiveness, amortisation, safety and environmental sustainability in focus. The benefit for you is our speed. ELT was founded in 1996 by two engineers whose experience is based on 30 years of working in the ventilation and dust removal technology sector. Thanks to our flexibility and technical expertise, we have been able to construct installations in a variety of sizes both in Germany and abroad. Our strength lies in the cohesion of our company with close collaboration between customer consultation, detailed planning, preparation and professional installation.

Website
CARPENTIER PACKAGING GMBH

Germany

A garage and one employee – that was how we began in 1996. Today, we can look back on our development with pride. As a family business, we have nevertheless kept our feet on the ground. While we have established ourselves as a technologically leading company operating worldwide in the field of carton packaging machines, we have always focussed on ensuring cooperative partnerships with our customers founded on trust. Another key aspect is individuality. From the beginning of a project to the commissioning stage, we work in close cooperation with our customers to develop a tailor-made solution – something that is greatly appreciated by our customers which include numerous prominent national and international companies. Over the years, thanks to our modern machines, our own laser cutting centre and the expansion of our production capacities, we have become a full-service provider of carton packaging systems, from filling the carton to the end packaging in trays or cardboard boxes. We are also the world leader in fish finger packaging systems, counting on approximately 50 highly motivated and experienced employees. Our team enjoys long-standing experience in the sector and consists of electrical and mechanical engineers, draughtsmen, technicians, mould builders and fitters. We are looking forward to getting to know you and to developing your custom solution for your packaging

Website
BARRADAS GMBH

Germany

Barradas GmbH was founded in 1997 and is headquartered in Dortmund. Owner and managing director: Rui J. Barradas. Barradas stands for power, speed and precision. These are ensured through innovative, customised recycling plant solutions and concepts, massive and robust machines, a motivated, competent and goal-oriented team as well as precise work in every process step. Our areas of focus are: Machine building and plant construction, consultation and optimisation in terms of existing machines and plants, new concepts and solutions as well as wear parts for recycling machines and plants, paired with first-class service. We have successfully established our machinery on the market. This includes the Barradas rotary shears (BRS) and our special 4-cut rotary shear (BRS 4CUT), our Barradas rotor ripper (BRR) and our granulators (BGF/BGT/BGX). Our recycling system concepts are implemented in the following areas: Lithium-ion batteries, refrigerators (ELF), electronic waste (WEEE), metal, cables, plastic and various kinds of tyres.

Website
PERKUTE MASCHINENBAU GMBH

Germany

In 1967, PERKUTE began developing and producing systems for cleaning metal and degreasing in the town of Rheine in western Germany. In 1996, PERKUTE was incorporated into the STENHØJ GROUP, which has worldwide operations. Since 2001, PERKUTE workers have been developing and producing automatic systems at the site in Rheine (Düsterbergstraße) for cleaning parts according to customer-specific requirements. PERKUTE has been certified in accordance with DIN EN ISO 9001 since 2007. The systems for cleaning parts are used across the entire production and manufacturing industry, mechanical and plant engineering and also in the repairs and maintenance sector. PERKUTE is now one of the leading manufacturers in this field.

All the products for "used machines"

Used machines

See all products
STRECKFUSS SYSTEMS GMBH & CO. KG

Germany

Innovative soldering systems as well as machines and equipment for component preparation for the electronics industry. STRECKFUSS SYSTEMS develops, builds and services soldering systems, as well as machines and equipment for component preparation for the electronics industry. As a systems manufacturer with over 50 years of experience, we know: Experience counts – working together with our customers, but also as forerunners in the soldering sector, our products are not only valued because of their high quality and adaptability but also because they can act as stand-alone systems. In our capacity as manufacturer, we also provide all the necessary servicing and repair works on our own systems and even systems from other manufacturers. Our main area of business lies in the construction of soldering systems for circuit board production, and our product range incorporates the following equipment: - wave soldering systems - selective soldering systems - tin solder recycler - solder bead brushes. We also help our customers to prepare components and devise customised production applications.

All the products for "used machines"

Used machines

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

GÖTZ GMBH

Germany

The company GÖTZ GMBH, is a Manufacturer/ Producer, which operates in the Food industry - machinery and equipment industry. It also operates in the used machines industries. It is based in Heiligkreuztal, Germany.
EUROGRU SERVICE GMBH

Germany

The company EUROGRU SERVICE GMBH, is a Manufacturer/ Producer, which operates in the Cranes and gantries industry. It also operates in the Construction cranes, Construction cranes, cranes, and used machines industries. It is based in Erzhausen, Germany.
IBAG DEUTSCHLAND GMBH

Germany

The IBAG Group is one of the leading manufacturers of high-frequency engine spindles for use on machine tools, lathes and grinding machines. In addition to the sale and servicing of IBAG products and services, IBAG Germany specialises in the correct use of HSC technology. In our technology and demonstration centre at the Lindlar (DE) site, customer requirements can be implemented, analysed and optimised at full scale. Your employees will be trained in the use of HSC technology. At its Lindlar site, IBAG Germany produces the majority of the high-precision parts used in IBAG spindles. This guarantees constant quality from the purchase of materials to the final acceptance. Our in-house part production means that we can meet our customers needs and delivery wishes more quickly and efficiently.

Website
ZENO-ZERKLEINERUNGSMASCHINENBAU NORKEN GMBH

Germany

As a manufacturer of recycling plants and treatment plants, crushers and sorting and separation technology, we supply robust machines that ensure efficient operation thanks to their low-wear and maintenance-friendly design. Whether wood, plastic, paper, household waste or commercial waste – we are familiar with all kinds of materials and offer you the ideal systems and tools from our in-house production facilities from a single source. On a production area spanning over 25, 000 m², our family-owned company produces machines and systems that are used all over the world – always with the greatest possible vertical integration and best quality for your exacting requirements. In addition to customer-specific machines, you can also purchase many factory-reconditioned used machines from us. Visit our exhibition and experience ZENO technology for yourself in a demonstration at our technology centre. We are looking forward to your visiting!

Website
CROBBER

Germany

crobber is the innovative, versatile system for plate brushes and disc holders. It is compatible with over 20 brands and over 500 different machine types. crobber supplies the brush and the connection to the machine as two components. The connection technology is separate from the wear part and can always be reused. This is a sustainable solution that saves resources and money. crobber is synonymous with perfect cleaning, outstanding quality and excellent cost effectiveness for the following brands: adiatek, cleanfix, columbus, comac, diversey, ecolab, fimap, ghibli & wirbel, hako, ipc gansow, kärcher, klindex, nilco, nilfisk, numatic, rcm, sorma, sprintus, tennant, victor, viper, wetrok. We enable you to equip all your cleaning machines (single disc, scrubber and ride-on scrubber machines) using a single, cost-effective, versatile system – regardless of the manufacturer or type. With well over 4000 possible options, it's easy to find the right crobber for your machine and situation.

Website See all products

F.U.R. WICKELTECHNOLOGIE GMBH

Germany

Our range of machines includes, among others, toroidal winding machines and robots, stator winding machines and robots, combined wire winding and strip winding systems, taping machines and semi-robotic machines, wire brakes, mica-strip winding machines, taping machines for generator bars, hot strip and spiral winding machines, turret winding machines, layer winding machines and ring winding machines. The company's profile of services also includes the following: Reconditioning of used winding machines and systems to state-of-the-art condition in terms of both technology and control. Mechanical processing of all materials that are conventional in machine construction. Mechanical and electromechanical assembly of modules. PLC programming. The company offers extensive help and advice to customers to develop a solution for their winding tasks. Since the opening of the CWIEME in Berlin more than 20 years ago, F.U.R. has been present there and shows its latest generation of machines to the national and international public every year.

Website
H. SCHOPPE & SCHULTZ GMBH & CO. KG

Germany

We are one of the largest manufacturers of instant drinks in Europe and support our partners by providing expert knowledge in the fields of vending, HoReCa, food retail and industry, and helping them to expand their brand portfolio and tap into new markets. We give each customer a personal service and offer every supply chain solution required, from preliminary planning to delivery of the customised product. Our core areas of expertise are in the development and production of cocoa, drinking chocolate, toppings, coffee whitener and every type of drinks powder for use in vending machines and capsules or for handmade drinks. We are a medium-sized company and pride ourselves on our flexibility, capability, reliability and professionalism. We are compliant with all the applicable European standards such as ISO and IFS, have a proven track record in demanding customer audits and offer organic, Fairtrade and Rainforest Alliance-certified products to ensure our customers' success.

Website

Product recommendations

Germany

Germany

Germany

See more products

KARL HEESEMANN MASCHINENFABRIK GMBH & CO. KG

Germany

Karl Heesemann Maschinenfabrik GmbH & Co. KG was founded in 1933 by dedicated engineer Karl Heesemann. Heesemann has been producing sanding machines for industry and trade for over 80 years. We have also been behind several influential innovations that are still in use today. Heesemann has continued to offer and drive forward new sanding technology. Today, Heesemann employs around 150 people at its headquarters in Bad Oeynhausen, and is the global market leader in wood sanding machines. Our product range includes machines for sophisticated craft operations as well as heavy industrial machinery. In addition to the wood sector, Heesemann is currently expanding its market share in the metal sector. The export quota is around 80% and our main markets after Europe are the USA and Asia. · Heesemann sanding machines are used to manufacture furniture, doors and wooden floors, in the record, crafts and interior fittings industries and for the production of mouldings. · Heesemann machines are used for calibration and fine sanding of solid wood, as well as veneer, lacquer and foil sanding. · Depending on the type of machine, surfaces, edges and profiles (rectilinear and curved parts) and three-dimensional shaped workpieces (e.g. car interior trim) can be sanded. · Heesemann offers the profiRounder deburring and edge rounding system for metal working operations.

Website
SCHOTT DIAMANTWERKZEUGE GMBH

Germany

SCHOTT Diamantwerkzeuge GmbH produces high-quality drilling, grinding and milling tools, mainly according to customer requirements for glass, ceramics, stone, metal and plastics processing as well as for the optical industry. The tools manufactured for our customers are adapted to: •The materials to be machined •The machines used •The required production targets. History: The company was founded in 1975 by Mr Klaus Schott in Stadtoldendorf. Since then, permanent expansion of production. TÜV achieve ISO 9001 in 2004 – certification from 2010–present: Various research projects are underway in close cooperation with technical colleges and universities. Our objective is: To continuously improve machining processes. New development of tools for machining new materials, especially for ultrasonic applications. Installation of the first tool shop systems from 2012–2017. Expansion of sales activities and development of application technology from 2018–present

Website
PROWITAL GMBH

Germany

We turn, mill, saw, drill, grind flat, finely deburr and polish complex parts made from stainless steel, titanium, nitinol and plastic made from special materials. Prowital GmbH has manufactured medical products for many years. From the idea through to the finished end product, we support our partners in designing and manufacturing prototypes, individual items and small batches. To do this, we use the very latest machines and manufacture your products using titanium, nitinol, stainless steel, special materials and plastic (e.g. PEEK). Benefit from our expertise – challenge our experienced and innovative team even on the most difficult tasks.

Website
ECOROLL AG WERKZEUGTECHNIK

Germany

ECOROLL AG Werkzeugtechnik is a leading provider of tools for fine mechanical surface machining. ECOROLL AG Werkzeuge – which employs around 80 people – develops, manufactures and distributes tools for burnishing, roller burnishing, skiving burnishing and machine hammer preening. ECOROLL tools are used wherever there are special demands for surface roughness or component strength. The burnishing or roller burnishing process is carried out on commonly used machine tools directly after pre-machining and achieves surfaces with very low roughness (< Ra 0.01 / < Rz 1.0 µm), comparable to results when sanding, honing or polishing. This is thanks to the forming of the component edge zone roughness profile without material removal, while also increasing the dynamic strength and edge zone hardness. ECOROLL can also supply a comprehensive range of standard tools from stock. Another of our strengths is developing and manufacturing special solutions according to customer requirements. With our team skilled in distribution, design and applications technology, we create tailor-made tools and processes for special customer applications. Our applications team also offers the opportunity to test our technologies through machining trials at ECOROLL's or the customer's premises and to find any ways of improving the surface finish.

Website See all products
EUROLASER GMBH

Germany

Eurolaser is your partner in the world of laser technology, the specialist for laser systems for cutting, engraving and marking of different materials such as acrylic, wood, textiles and plastic films. We provide extensive support from a single source. Our cutting machines are used in the advertising industry, automotive industry, clothing industry, for furniture manufacture and interiors, for membrane keyboards and the electronics industry, for model building and architecture and much more.

Website See all products
MASCHINENFABRIK BERTHOLD HERMLE AG

Germany

Maschinenfabrik Berthold HERMLE AG is a German listed company with its head office in Gosheim in the district of Tuttlingen and is one of the leading manufacturers of milling machines. Globally there are more than 30000 machines in use, mainly at suppliers of medical technology, in the optical industry, in aviation, in the automotive industry and in motor sport. The most important components are developed and manufactured in Gosheim. HERMLE’s universal milling machines and machining centres are used for the machining of tools, moulds and series-produced parts. HERMLE produces small to medium-sized three to five-axis milling centres for a wide range of applications. Even machines for applications with increased demands on precision or machining volumes are manufactured. The different machine models are available with magazine extensions and a pallet changer. Furthermore, various handling systems are offered directly from the manufacturer. HERMLE is all about milling and achieving outstanding results. This is clearly demonstrated by the slogan "milling at its best". It stands for high-performance, highly innovative machining centres which have risen to a leading position nationally and internationally. It stands for a far-reaching and closely meshed sales and service network and for a worldwide presence.

Website See all products
LLOYD DYNAMOWERKE GMBH

Germany

More than 100 years of experience and passion combined in a manufacturing operation that's driven by state-of-the-art engineering and innovation – that's LDW. We supply reliable machines to meet the individual requirements of our customers. At LDW, we produce high-quality three-phase motors, synchronous generators and DC machines using the latest technology. Our machines are characterised by their operational safety, long service life and reliability – premium quality that's proudly made in Germany. As an SME, our business operations are simple yet comprehensive: We carry out the entire design and production process for the machines at our headquarters in the Hanseatic city of Bremen. We offer our customers individual, personalised support. We also aim to ensure they always have the same person to contact at our company. Our customers benefit from the close links within our team – particularly when it comes to ensuring rapid, reliable service. Since 2017, we have been part of the Luxembourg-based company Powertrans S.A.

All the products for "used machines"

Product Care And After-sales Service

Repairs

See all products
F. ZIMMERMANN GMBH

Germany

F. Zimmermann GmbH is a global leading high-tech provider of portal milling machines and horizontal machining centres with very large working areas, high dynamics and cutting capacity. The company has over 200 employees around the world and follows the clear objective of providing the right solution for its customers and ensuring high profitability: "Quality made in Germany". The special machines are used all over the world in the automotive, aeronautical and mechanical engineering industries.

All the products for "used machines"

Horizontal Machining Center FZH400

See all products

HPTEC GMBH

Germany

HPTec GmbH is an internationally operating medium-sized company that develops, produces and sells drilling and milling tools around the world. Customers benefit from our decades of experience in the micro-machining sector and the support of our application technicians. Our drilling and milling tools are used to machine printed circuit boards (PCBs), aluminium, ceramic, CFRP/GFRP, copper, graphite, steel (CrCo), zirconium and plastics.

See all products
BSA SCHNEIDER ANLAGENTECHNIK GMBH

Germany

Vollmer-Federn BSA Schneider Anlagentechnik was founded in Aachen in 1990. With a team of 25 employees and a worldwide distribution network with sales agencies for 32 countries, the medium-sized company has firmly established itself in the confectionery and food processing industry. At our plant in Aachen, we develop and manufacture machinery and equipment for the chocolate industry, specifically for the production and storage of liquid chocolate masses. We have products to cover a wide range of applications, including mixing, rolling, conching, temperature regulation and storage. Our range of products and services includes: Pre-rollers, production lines for liquid chocolate, mixers, transportation and conveyor belt systems, drying conches, equipment and container construction, liquefiers, chocolate pumps/feed pumps, magnetic filters/separators, straight way valves, overhaul of used chocolate machines, metering units for liquid and dry components.
BLECH-TEC GMBH

Germany

In order to enable the efficient bending of even extremely small parts and to thereby meet the requirements of our customers, we have developed a controlled bending machine tool for extremely small parts, the BT-150. It is now finally possible to produce extremely small bent parts such as technical springs, contacts, covers, brackets and housings quickly and easily and without using special tools. This machine is primarily used in tool manufacturing, in the electronics industry, in sheet metal machining and in the medical technology industry, but it also used in many other sectors. As our BT-150 has also enabled us to solve problems faced by other companies, Blech-Tec has quickly established itself as a machine manufacturer. Our location in Sauerlach, Altkirchen district, has excellent transport links thanks to its position in the south of Munich, just outside of the city limits. Our company is situated on the A8 and the A99, enabling it to be reached quickly and easily both from outside of Munich and from nearly every part of the city.
ROMMEL PRÄZISIONSTEILE GMBH

Germany

We are your reliable partner for the supply of precision parts. We have been mass-producing precision parts for almost 40 years. our machinery includes Variomatic automatic revolving transfer machines with 9, 11 and 12 stations, some of which are cam-controlled and some NC-controlled with up to 60 NC axes per machine. The machines are specially designed for smooth-running part production with the same performance and quality as series parts. Fully automated production processes and a large range of machining options put us in a position to machine even complex parts in all aspects. We process steel, aluminium, copper alloys and brass, from rings, large coils, rods, lengths or moulded parts to feed magazines. Our range of products is complemented by various deburring technologies, slide grinding, surface processing, ultrasonic cleaning, assembly work and heat treatments.
GICKLHORN GMBH KUNSTSTOFFVERARBEITUNG

Germany

The company was formerly headquartered in Schlierbach, Baden-Württemberg, between Stuttgart and Ulm at the foot of the Swabian Alps. With just three members of staff to start with, a customer base primarily from the wastewater treatment sector was quickly established and supplied with premium-quality products such as containers and pipes made of thermoplastics. Following steady growth, in 1982 the company set up its current headquarters with newly constructed premises in Albershausen, which has been expanded several times since. This is the home of the modern, conveniently situated production facility belonging to Gicklhorn GmbH, which makes welded structures out of thermoplastics with the necessary machines and equipment. We process premium-quality plastic semi-finished parts such as boards, profiles and pipes using machining, hot forming and welding/glueing. All the most common materials are processed, including PE, PP, PVC, PVDF, E-CTFE, PMMA und PC.
PITTHAN DRAHT DIPL.-ING. M. COLONNA E.K.

Germany

Pitthan Draht was founded by the Pitthan husband and wife team in 1983. Over the years, their leadership has allowed the company to become an internationally established manufacturer of specialist wires. Dipl.-Ing. Michele Colonna has been the owner and head of this successful company since 2017. Thanks to innovative thinking, new ideas, flexibility and continuous further development, Pitthan Draht's products are now synonymous with the highest quality standards for individual requirements. Since moving in 2007, Pitthan Draht has been located at their new production facility at 10 Sporbecker Weg, Hagen. Using modern machines, this is where we make our customers' individual requests become reality – with outstanding quality guaranteed. When it comes to quality and reliability, the toughest requirements we have to meet are our own. Each production stage in the course of the manufacturing process is monitored and examined by our Quality Assurance team.
HSA HELIO SERVICE AHAUS GMBH

Germany

Experience and innovative potential – these are the qualities that make our employees stand out. We are experts in the fields of cylinder production and mechanical engineering. We are second to none. The company was founded with a focus on the development and manufacturing of measuring equipment for the production of gravure cylinders. Our second focus was, and continues to be, the used machine trade. Stand still is not an issue for us – this is why our product range is already expanding to include special machinery for the gravure printing industry, hard chrome plating of large-format rollers and consumables for gravure cylinder production. hsa – skilled and reliable – for years, our company has stood for skilled customer care and reliable services. This allows us to build a cohesive team and maintain direct contact with our customers. Barrier-free communication enables hsa to react quickly and flexibly to your wishes and needs.
KM&W MASCHINEN UND WERKZEUGBAU GMBH

Germany

We are a service company with many years of professional experience in machine and tool construction for the aluminium, plastic and steel sectors. KM&W is an expanding family business with 15 members of staff and many years of professional experience in machine and tool construction for the aluminium, plastic and steel sectors. Our product range includes corner jointing machines for window and door frames, stamps and tools for profile machining, aluminium and plastic saws, and tailor-made special machines and retrofits according to customers' requirements. The latest 3D CAD software and state-of-the-art manufacturing processes are used for design and production. Other services provided by KM&W are CNC contract manufacturing, welding technology, used machine trade, technical customer service on site and our extensive hydraulic service.
VGS AUTOMATISIERUNGSTECHNIK GMBH

Germany

VGS Automatisierungstechnik GmbH is a modern, medium-sized company in the special machine construction industry. The firm was founded in 2010 by proprietors Jan von Gescher and Reinhard Siek after having worked together for many years in a machine construction business with renowned clients. The VGS philosophy is the construction of special machinery that is customised to the customers specific requirements. All employees at VGS Automatisierungstechnik have many years of experience under their belt in the planning, design and implementation of machines and plants, including highly complex systems. Production is organised in accordance with highly modern and cost-effective principles. Three facts about us: The machines are designed using CAD systems by creating 2D and 3D models. Our entire hall space covers approx. 700 square metres; the assembly area is 30 metres long and 15 metres wide. Very heavy components can be lifted using a 10-ton indoor crane.
WEUTHEN ENGINEERING GMBH

Germany

We are an international engineering company with tradition. But it is precisely this tradition means for us to be always on the cutting edge. Our knowledge allow us to design machines for every type of industry. Highest quality, standards of hygiene and professionalism are our main goals. Our designers create machines and adapt them to customer needs in order to meet customer expectations and perfectly fit the device to the production line. We are actual covering whole Europe with our German headquarter in Monchengladbach. Worldwide projects are handled also from Germany.