Results for

Reinforcements - Manufacturer Producer - Germany

116 Companies

387 Products

Product recommendations

Turkey

Turkey

Croatia

China

See more products

STW KAUTZMANN GMBH

Germany

With its workforce of over 90 people, family company Schwarzwälder Textil-Werke Heinrich Kautzmann GmbH (STW) develops and produces top quality fibres for your industry and applications. As a leading specialist in the production of fibre fillers, shortcut fibres, fibrids & pulp as well as customised solutions, we also process all the fibre materials you need; from natural and synthetic fibres through to high-tech fibres. Thanks to decades of experience, continuous research and a strong customer focus, we are able to stay flexible and react to new requirements with our bespoke fibre solutions. And since we operate in over 70 countries, you will always find a competent fibre expert in your vicinity.

Website
OTTO KUHLMANN AUTOMOTIVE SYSTEM-PARTS GMBH

Germany

We are specialists in the production of single wire rings, cable beads and support and clamping rings. We are proud of our tradition (we were founded in 1908), and work hard to hone our expertise and maintain partnerships with our customers. Trust in the quality and the service provided by OTTO KUHLMANN Automotive System-Parts GmbH. For over 30 years, we have been an indispensable partner and solution provider for the automotive and tyre industry. Our clamping and support rings are designed for use in air springs for cars, trucks and buses, but are also suitable for industrial applications. Our cable beads are mainly used in tyres for the high-performance area, motor sports and the aviation industry.

Website
SOLIDIAN GMBH

Germany

As a leading specialist, solidian develops and products non-metallic reinforcements made from carbon glass or basalt fibres. The reinforcements are available in bar or mesh form. The fields of application for our reinforcement solutions range from facade panels through bridge construction and maritime construction to restorations. If necessary, solidian supports you at every stage of your projects, from application consulting through the calculation of reinforcements to assistance on the building site. In our in-house test laboratory, we also determine the necessary parameters for you individual building projects. With a team of 270 employees spread across two sites, we develop practical solutions for our customers for the buildings and structures of tomorrow.

Website
WDM DEUTENBERG GMBH

Germany

We manufacture spot-welded wire mesh to your measurements and specifications - WDM Deutenberg specialises in industrial wire mesh manufactured to individual customer requirements. Our spot-welded wire mesh is available in sizes from 300 x 250 mm to 8000 x 2400 mm depending on the mesh type and wire diameter. We use four different types of wire and materials to produce our meshes: bare wire, galvanised wire, zinc-aluminium-coated wire and stainless steel wire. In addition to the wire types, we have different diameters to suit your application, from 2.0 mm to 18.0 mm. Our spot-welded wire meshes are suitable for a wide range of applications. They are used in industries such as landscaping, agricultural construction, mechanical engineering, shop fitting, metal processing, and the food industry, electrical industry, construction industry and retail. For more information, visit www.wdm-deutenberg.com

Website
LEONI DRAHT GMBH

Germany

Our LEONI Business Group Wire Products & Solutions is a leading supplier of highly advanced products and solutions made out of copper and LEONI Histral® alloys bare and plated, as well as composite materials. These are developed in close cooperation with customers for electrical components applications and the cable industry. Our versatile product portfolio includes a unique choice of wires, strands, ropes, heating conductors and wire solutions for automotive manufacturers and automotive suppliers. In addition we offer engineering services and innovative products for e-mobility as well as high power connectors and solutions for 48-volt systems, high voltage batteries, electric motors and for industrial applications. Apart from that, we have not forgotten our origins, despite all these modern, high-performance materials. We still produce traditional “Lyonese wares”, such as gold and silver-plated spun threads, bouillon and pearl wires for sumptuous embroidery and woven fabrics. Highly satisfied customer needs are the focus of all our actions. Our global sales and production network, consisting of locations in Europe, China and the USA, guarantees local consultation and support around the globe.

All the products for "reinforcements"

Braiding wire

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

P.J. PRAUSE DUROTEC GMBH

Germany

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

Website See all products
GGB

Germany

GGB helps create a world of motion with minimal frictional loss through plain bearing and surface engineering technologies. With R&D, testing and production facilities in the United States, Germany, France, Brazil, Slovakia and China, GGB partners with customers worldwide on customized tribological design solutions that are efficient and environmentally sustainable. GGB’s engineers bring their expertise and passion for tribology to a wide range of industries, including automotive, aerospace and industrial manufacturing. To learn more about tribology for surface engineering from GGB, visit www.ggbearings.com. GGB is an EnPro Industries company (NYSE: NPO). Local contacts (North America and UK): GGB North America Factory I 700 Mid Atlantic Parkway PO Box 189 USA-Thorofare, New Jersey, 08086 Tel. +1 856 848 3200 Fax +1 856 848 5115 usa@ggbearings.com GGB North America Factory II 1414 Metropolitan Avenue PO Box 189 USA-Thorofare, New Jersey, 08086 Tel. +1 856 848 3200 Fax +1 856 848 5116 usa@ggbearings.com GGB UK Subsidiary of GGB Heilbronn GmbH Ochsenbrunnenstraße 9 D-74078 Heilbronn Tel. +44 7496 097815 greatbritain@ggbearings.com

All the products for "reinforcements"

HPMB Bearing

GAR-FIL Bearing

GGB-MEGALIFE XT

HPF Bearing

MLG Bearing

Website See all products
TECHNO-COMPOSITES DOMINE GMBH

Germany

Do you need special, ready-to-install products made of fibre-reinforced plastics? Then we should get in touch. Creative solutions with fibre composite components/Ready-to-install GRP/CRP/Tailored/Series products and unique items. We are your system supplier for high-quality fibre composite components. Don't try just to replace your steel component with GRP. Make the most of our expertise in [consulting and planning] to develop the right and cost-effective components. Specialists work in-house at our company with a great deal of practical experience in their [designs]. This is how an idea is turned into a system component. [Production] We produce your components. Ready to install. CNC machinery, dust extraction, adhesive bonding experts, quality assurance. We'll do that for you. Simply contact us. DIN 6701-A1 | DIN 2304-S1 | DIN EN ISO 9001: 2015 | IRIS certification | ISO/TS 22163 Founded 1994 | 50 qualified employees | 4800 m² production and warehouse area | CNC machinery

Website See all products
FIBROLUX GMBH

Germany

Manufacturer of GFK profiles and gratings. Our fibreglass profiles are produced in accordance with EN 13706. Our plastic gratings are made according to DIN 24537-3. Standard profiles are available from stock. Customer-specific profiles created using our in-house machine tools with quick turnarounds. We support our customers with product selection and optimisation from the tender phase onwards. Prototypes with 3D printing technology. Calculating and designing constructions. Advice on replacing conventional materials and constructions with GFRP solutions. Product range: Standard profiles, such as round pipes, square pipes, rectangular pipes, brackets, flat profiles, I profiles, H profiles, Z profiles, hat profiles, C profiles, U profiles, bars, corner profiles, dogbones. Custom profiles to order. Gratings, safety flooring, treads, rebars, reinforcement, threaded rods, nuts, plates, corrugated slabs, square guide way, ladder rungs, sandwich profiles, cable trays, cable ducts, consoles. Flammability properties – DIN4102, UL94V, CEN/TS 45545, NFF16-101, BS 476, EN 13501, DIN 5510.

Website
WUS WILHELM UNGEHEUER SÖHNE GMBH

Germany

We are a traditional manufacturer, certified according to ISO-9001, with state-of-the-art production technology as well as innovative products. Our three core areas of roofing products, fixing systems and stamped parts form the solid basis for our global success. Innovation, creativity and quality are the distinguishing features of WUS products. Our roof safety hooks, metal roofing tiles, gutter brackets, downspout clamps, special solutions, snow guard systems, pipe clamps/brackets, sprinkler clamps, mounting/fitting brackets and profiles and the matching accessories are known all over the world. In the field of stamped/bent parts, we develop and manufacture new and demand-oriented products together with our customers. Our in-house departments, development, construction, tool making and production, work hand in hand. Just as our roof and plumbing products do, so too do our stamped/bent parts leave our premises with the appropriate surface finishing.

All the products for "reinforcements"

Pipe Clamps

Pipe Clamps

Website See all products

DIGEL STICKTECH GMBH U. CO KG

Germany

Digel-Sticktech GmbH & Co. KG was founded in 2006 in the Swabia region Germany, and has dedicated itself to innovation and fulfilling customer requirements ever since. We solve our customers' problems and apply our technical expertise to deliver not only high-quality products but also competitive benefits. In 2010, we doubled the size of our production facility and just two years later we extended it by another 3, 000 m² by building a new 3-storey hall. We stand out from the crowd thanks to our industry expertise in the following areas: – tailored fibre placement (TFP) – heating elements for the automotive industry (seat heaters, steering wheel heaters, interior heating elements, battery heaters, roof liner heating elements and textiles as well as flexible heating elements all around the vehicle) – modern infrared heaters and infrared heating elements – smart textiles, e-textiles – carbon-fibre-reinforced plastics (CFRP) – fibre composite products – vehicle parts made from glass-fibre-reinforced plastic (GFRP) – scrims made from technical fibres – smart sensors and smart textiles – scrims and reinforcement structures – preforms – carbon products – carbon-fibre textiles – inductive sensors. Our fleet of cutting-edge machinery comprises more than 80 embroidery units and our production is 100% carbon-neutral. We are committed to making our operations environmentally friendly, and apply technical and organisational measures to ensure that our company leaves the minimum impact on resources and the environment.

Website
TFP TECHNOLOGY GMBH

Germany

TFP Technology GmbH is a German manufacturer of textile fibre scrims and reinforcement structures based on innovative CNC laying technology. We use state-of-the-art TFP embroidery laying machines with which we produce elements up to a size of 215 cm x 200 cm. The textile preforms and rovings are specifically produced using the Tailored Fibre Placement process. The fibres are laid in one piece and thus form a complete reinforcement structure for the fibre composite component. We can also offer "sandwich functions" by integrating heating elements and textile sensors into our preforms (application examples: Anti-icing, de-icing, sensor elements and sensor surfaces). Our technology makes it possible to produce innovative, technical textiles. We support our customers from the first idea to prototype production up to series production by our qualified personnel.

Website See all products

Product recommendations

Germany

Germany

China

Germany

See more products

SGL TECHNOLOGIES GMBH

Germany

Portrait of the SGL Carbon site in Wackersdorf: The SGL Carbon site in Wackersdorf, in the Upper Palatinate, is part of the Carbon Fibres division. Here, about 140 highly-qualified staff deal with the production of mats and non-woven fabrics from carbon, glass or natural fibres. The diverse product range of over 150 product variants is rounded off with the subsequent process step of stacking. This involves superimposing different layers of mats, cutting them into stacks and joining them, all per customer specification. These stacks are then processed by the customer to produce preforms or finished components. Every year, SGL Carbon produces over 8, 000 tons of carbon, glass or natural fibre mats at the Wackersdorf site. The site also boasts three stacking machines with a capacity of over 2 million stacks per year. The products from Wackersdorf are used in a wide range of sectors, albeit primarily in the automotive and aerospace industries. Several recycling facilities serve to recycle the production waste that cannot be avoided in the process. All the facilities are powered by green electricity. Our SIGRATEX textile materials are the ideal basis for producing high-quality, fibre-reinforced plastics. They are suitable for a wide range of processing operations.

Website See all products
WDM DEUTENBERG GMBH

Germany

We manufacture spot-welded wire meshes according to your specifications WDM Deutenberg is a manufacturer for industrial wire meshes according to your individual customer requirements. Basically, our spot-welded wire meshes have >> Size: 300 x 250 mm to 8, 000 x 2, 400 mm depending on mesh width and wire diameter >> Material: bare wire, pre-galvanized wire, galvanized wire, aluminum galvanized wire, stainless steel wire >> Diameter: 2.0 mm to 18.0 mm >> Processing options: diverse additions, deformations, cuttings & refinements The scope of our spot-welded wire meshes is very diverse. They are used in industries such as landscaping, agriculture, engineering, shopfitting, metalworking, food industry, electrical industry, construction industry or retail. Further information available at www.wdm-deutenberg.com

All the products for "reinforcements"

Reinforcement Meshes

Website See all products
PEKU FOLIEN GMBH

Germany

PEKU Folien GmbH is a medium-sized family business that focuses on the sustainable production of films and bags. The company is a partner for the food, hygiene, garden, industrial, medical, pharmaceutical and many other sectors. The product portfolio consists of mono- and co-extruded films made of polyethylene, which are up to 100% recyclable. Internal film waste is processed in our own recycling plant and returned to the production cycle. For our films and bags made from recycled material, PCR (post-consumer resin) and PIR (post-industrial resin) regranulates are also used, depending on customer requirements. In addition, with PEKUGreen, a brand was created that uses renewable raw materials. PEKU prints all films with up to 10 colours in high-quality flexographic printing (full HD quality), depending on customer requirements. The range of films includes tubular, half-tubular and flat films. In the converted area, PEKU has concentrated on drawstring bags, pressure seal bags, chain bags, Euro-hole bags, wrap-around bags and special bags. In addition, the film manufacturer also offers simple bottom gusset, side seam and bottom seam bags. With PEKUWhite, the product range also includes cleanroom films and cleanroom bags in various sizes. Please contact us! Let us advise you.

All the products for "reinforcements"

BAGS WITH REINFORCED EUROSLOT

Website See all products
ROCHOLL GMBH

Germany

Technical test specimens for your requirements. 40 years ago, Rocholl GmbH started to specialise in the manufacture and sale of test specimens. With a wide range of customer requests, the range grew continually: We make test specimens for virtually all materials to be tested. We like to rise to the challenge of custom-made specimens for use in testing and research institutes in particular. We employ over 25 members of staff, all of whom are selected experts in their field. This is because knowledge of materials and their properties plays an important role in the manufacture of test specimens. Together with our cooperation partners, we meet the very high requirements for materials and design in the area of test specimen manufacturing. We are among the best in Europe: The satisfaction of our customers is proof and confirmation for us. Well-known companies have placed their trust in us and benefit from our mutual cooperation and customer focus.

All the products for "reinforcements"

Plastic Test Specimens

Website See all products
SCHUBERT & SALZER CONTROL SYSTEMS GMBH

Germany

Schubert & Salzer Control Systems is a fast-growing high-tech company that develops, manufactures and distributes high-precision control and shut-off valves for industrial use in process engineering methods. Our valves are among the most efficient products on the market in terms of energy consumption, service life and noise generation. Their compact design and high level of control accuracy minimise installation and maintenance work while ensuring a high level of operating and process safety across extremely long service lives. Schubert & Salzer Control Systems GmbH is based in Ingolstadt in south eastern Germany and provides customers with "Made in Germany" high-quality products either directly or via our subsidiaries in Belgium, the Netherlands, Luxembourg, the United Kingdom, France, India and the USA, as well as over 40 Schubert & Salzer partners all around the world.

All the products for "reinforcements"

Type 8050 – Sliding Gate Manual Valve Type 8050 - Gs3

Type 8042 – Pressure Regulator Type 8042 - Gs3

Website See all products
WAGNER-TECH-TEXTIL GMBH

Germany

With 17 years of experience, we supply the textile and metal processing industry across Europe. Our products are trusted by textile weavers, knitters, broad weavers, automotive suppliers, wire weavers, wire knitters and wire braiders. Our products include: Metallic yarn, aluminium wire, stainless steel wire and copper wire

Website
LIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN

Germany

LIPP GmbH – CONTAINERS AND SYSTEM SOLUTIONS FOR SOLID, LIQUID AND GAS FORMULATIONS. LIPP GmbH in Tannhausen is a specialist for container construction with more than 60 years of experience. We offer you high-quality containers and system solutions made of steel for industry, municipalities and agriculture. Our unique design in the LIPP® system achieves the highest quality. With the focus on durability, flexibility and individual adaptability, we implement your project – from individual containers to turnkey systems. We implement the following products for our customers worldwide: Liquid containers, fermenters, biogas plants, buffer tanks and drinking water reservoirs. Right from the start, attention is paid to the success of the overall result. Suitable materials and high-quality accessories are used to meet the specific requirements of the contents to be stored. With over 200 patents, we have already implemented more than 30, 000 projects worldwide.

All the products for "reinforcements"

Reinforcement Ribs Provide Additional Stability

Website See all products
NEOXUM GMBH

Germany

Since 2009, we have been supplying international companies and corporations from a diverse range of sectors. Individual customer solutions such as special shapes, specified sizes or even engravings on the film surfaces (serial numbers, customer logos, inventory numbers) are our speciality. However, we currently (dated March 2018) maintain a database of more than 25, 000 models: From the standard size to custom-fit sizes for mobile phones, tablets, cameras, laptops, etc. all the way to really big flatscreen televisions up to 50" diagonally across. We can also offer display protection films for harsh industrial uses up to a size of 50". As a company certified in accordance with DIN ISO9001: 2015, we understand our customers' needs. We are by your side as partners, with all the advice you need to hand; not only when all you need is a protective film but we can also assist on the subject of OEM/ODM and present you with a perfect end result.

Website

MAX STEIER GMBH + CO.KG

Germany

STEIERFORM includes blanks, technical labels and rolled goods from a comprehensive adhesive tape range. STEIERPLAST manufactures ring binders, folders, envelopes and booklets individually according to customer requirements.

Website
IRLBACHER BLICKPUNKT GLAS GMBH

Germany

For over 80 years, Irlbacher Blickpunkt Glas GmbH has been an innovative company in the field of glass processing. The products we manufacture have applications in mechanical engineering, construction and sanitary technology, domestic heating, the household appliance and lighting industry, as well as the technology industry. We consider ourselves to be not only glass suppliers, but also problem solvers for demanding tasks. We develop new system solutions for and together with our customers. We supply specialised glass made to individual design requirements and the highest safety standards. Our decades of experience mean there are few limits to our glass processing capabilities.

Website
TECHNICAL TEXTILE MONTEX GMBH

Germany

ABOUT US – Montex Glass Fibre Industries Pvt. Ltd./TTM Germany is one of the biggest companies in the fibreglass industry and has developed into a conglomerate. We have managed to establish ourselves as one of the leading glass-fibre fabric manufacturers globally. Our roots are in Mumbai and Nashik, and we supply a wide range of (international) customers from Asia, Europe, the USA, the Middle East, Africa and Australia. Our company has established itself as the best solution provider for the most varied insulation requirements in sectors like heating, ventilation and cooling, electronic equipment, automotive, electrics and the building trade. On the basis of our strong R&D culture, we always strive for our Production and Service departments to manufacture and develop precisely the quality products that our customers need. And we do so at affordable prices. We are continuing to expand into untapped markets and are looking for continuous improvement processes. OBJECTIVE – To become the first point of contact for glass-fibre fabrics in the industry, and to do so through continuous improvement, driven by the integrity, teamwork and creativity of our employees. We want first-class products for satisfied customers.

Website
SLS KUNSTSTOFFVERARBEITUNGS GMBH & CO. KG

Germany

SLS is your reliable partner when it comes to the production of hollow or solid profiles. We can offer you an extensive range of high-quality profiles made with professional expertise. Here is a selection of what we can offer: – Standard profiles – Special profile solutions – From 20 g/m to 4000 g/m – Different colours and thermoplastics – Hard, soft or rigid and soft compounds for co-extrusion applications. Profiles requiring great stability can be manufactured with fibreglass or carbon fibre on request. SLS can also cater for special requirements for the electronics industry with materials with conductive or anti-static properties. Our customers come from the following industries: Window and façade construction, metal engineering, mechanical engineering, electrical industry, packaging and furniture industry, insulation and the DIY sector. There are (almost) no limits to the design of customised products. Together with you, we work on your ideas and develop tailor-made solutions. We look forward to your challenges

Website
SCHWEIZER GMBH & CO. KG

Germany

Custom cooler production and special parts for extreme demands. Motor sports, tuning and industrial applications demand maximum performance in the narrowest of spaces. For greater performance, you need components that fulfil high requirements and can nevertheless be installed and removed without problems. Schweizer GmbH & Co. KG is your expert for special production of custom coolers in the fields of motor sports and industry. Furthermore, we offer you turned and milled parts that are manufactured with the latest CNC machinery. Discover a multitude of attractive tuning components in our online range! Do you have thermal problems? Perhaps your heat protection is insufficient? Are the appropriate screw connections missing? Or do you need components that don't exist ready-made? Here at s-r-p.com, you can find a great selection of accessory parts of top quality. As great stress is often placed on these and custom solutions required, we rely on brand quality in several sizes

All the products for "reinforcements"

Oil Hoses

Website See all products
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Germany

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Website
SYSTEC VACUUM SYSTEMS GMBH & CO. KG

Germany

With extensive experience, knowledge and expertise, the Systec Group develops sector-specific solutions, which set new standards, not least because of its exceptional manufacturing quality. The companies of the SYSTEC group provide technologies for manufacturing and processing new types of materials, processing and system technology for industry and research, and technologies for retrieval of valuable strategic raw material. SYSTEC develops and manufactures plant technology for PVD coating for high-temperature processes of up to 3000 °C and plant technology for vacuum processes.

Website
MPI EUROPE GMBH

Germany

The MPI family of companies (Managed Programs and Performance Design) is a global product design, development and manufacturing company, supplying composite engine, automotive and marine components. We design and manufacture, among others, intake manifolds, valve covers and oil pans. MPI Europe also has many years of experience in e-mobility, medical technology and consumers. Our focus in Europe is components sensitive to warpage (e.g. coolant tanks, scoops) and complex assemblies (with 2K parts and kinematics, e.g. air-conditioning systems) We use our design expertise in prototypes and series production of plastic and carbon fibre components to offer high value to low- and medium-volume OEM, Tier 1, performance and motor racing customers. We offer European and American customers a convenient logistics concept with local tool sampling, part production and project management with technical communication in German or English.

Website
INTERNORM KUNSTSTOFFTECHNIK GMBH

Germany

As a Grimme Group company, we produce high-quality plastic products in-house: Rollers and roller coatings made of polyurethane plastics, moulded parts and injection-moulded items. Franz Grimme founded the company in 1987 in Damme (South Oldenburg, Germany). With modern and efficient products, we have transformed from a small company into a medium-sized business. Nowadays, we offer a wide range of customer-specific solutions for the international market. We are active in many different fields.

All the products for "reinforcements"

Glass fibre-reinforces plastic parts

Website See all products
PRESSTECK S.P.A.

Germany

Pressteck is one of the leading manufacturers of precision deep-drawn parts on multiple die transfer presses, and currently employs more than 100 workers. We manufacture made-to-order parts and assemblies in line with customer specifications. We practise customer service throughout the entire service life of your products. At Pressteck, all processes are optimally organised and certified. From material supply and production right up to needs-based delivery, we ensure prompt provision. Single-use, reusable and special packaging. Specific specialised solutions are possible upon consultation. Pressteck primarily processes stainless steels and non-ferrous metals. The manufactured products are exported worldwide. Pressteck uses metal products that are easily recyclable. The processes follow strict specifications to protect nature and the environment. Leading manufacturers rely on Pressteck. How about you?

All the products for "reinforcements"

Support sleeves for reinforcing plastic

Website See all products