Results for

Forged products - Manufacturer Producer - Germany

25 Companies

51 Products

Product recommendations

Germany

Germany

Germany

Germany

See more products

TRIBO-CHEMIE GMBH

Germany

Tribo-Chemie GmbH is your competent and reliable partner in the field of tribology. We specialise in release agents for die-casting, forging and other special applications. For 25 years, we have worked with our customers to solve technically challenging problems. New recipes using exceptional raw materials are perfected in manufacturing terms for customer use. Increasingly complex processes and component demands require not only trials carried out on our customer’s sites in the presence of technical experts, but also often the development of customer-specific solutions. Our own demands in terms of high environmental compatibility and resource preservation are outstandingly addressed by the R&D department. A motivated team ensures that everything runs like clockwork from the development phase to delivery and use by the customer. Our Graphitex® and Isolat® products for forging and die casting are impressive, thanks to improved and optimised processes available to the user. Our Graphitex® and Isolat® brands are sold worldwide.

All the products for "forged products"

Graphitex CR 255

Graphitex CR 250

Graphitex 870 - dispersion for forging - steel forming

Graphitex 289 - dispersion lubricant for forging / forming

Graphitex CR 28

Website See all products
KARL DIEDERICHS GMBH & CO. KG

Germany

We are one of the leading family-run businesses in the area of open die forging and in our sector. With around 490 well-trained employees, we produce open die forgings from 10 kg to 35, 000 kg in delivery weight, and rings with a diameter of up to 3500 mm. The basis for our success is the combination of extensive experience, specialist expertise and the latest system engineering in all operational areas. All Dirostahl products are subject to stringent quality control procedures. Thus we can offer our customers outstanding performances. These include expert consultation during the selection of materials and manufacturing procedures. Furthermore, we offer professional support during the implementation of components and the ability to deliver our products all over the world. This enables Dirostahl to produce reliable products at a favourable price-performance ratio – and of the best quality!

Website
CHR. HÖVER & SOHN GMBH & CO KG

Germany

For over 80 years, Höver & Sohn has stood for unrivalled quality. Yet this does not mean that we're beating the same old drum even now – the fire of passion for stainless steel is still part of our philosophy. Traditional values meet modern CNC technology: This combination guarantees quality that "just makes you happy". We are experienced and motivated, traditional and modern, committed and ready to meet your requirements. Chr. Höver & Sohn GmbH & Co. KG enjoys a worldwide reputation of providing the highest quality and reliability. At Höver, quality is not just a written word, but a universal principle of incorporating company culture in real life. As an independent specialist department, quality assurance is directly bound to company management from an organisational point of view. To Höver, quality without compromises down to the finest detail is a must. Quality and safety are integral parts of our company's philosophy.

Website
KB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES

Germany

KB Schmiedetechnik GmbH is a highly certified West German drop forge - forgings of all steel grades, including duplex, titanium, nickel-based superalloys like Monel® or Hastelloy®, Incoloy®, Inconel® – up to 130Kg unit weight. We are a drop forge in Hagen (Westphalia), located between the historic “blade & metal" region Solingen and the “soccer city” Dortmund, specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications, specifications, and standards: pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering American Bureau of Shipping (ABS) Bureau Veritas Marine & Offshore (BV) Det Norske Veritas (DNV) Lloyds Register (LR) Nippon Kaiji Kyōkai (ClassNK) Examples are forged components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pipe connections, pressure-bearing parts, parts for valves like bodies, tube connectors like fittings, flanges and manifolds or pressurized parts for boiler systems like nozzles or headers/ caps, parts and pieces for wagon construction like articulation sockets or plates for buffer systems, parts for special vehicles, weapons, military and more.

All the products for "forged products"

Forgings for hydrogen and nuclear technology

Closed-die drop-forging of steel and special metals

Every nut, bolt, and screw - forgings for harsh environments

closed die drop forgings of all steel grades and alloys

seawater-suitable, non-embrittling, corrosion-resistant

Website See all products
GEORG MASCHINENTECHNIK GMBH & CO. KG

Germany

Georg Maschinentechnik specialises in ball retainer automatic stamping machines and forging presses. Our range of products also includes mechanical and hydraulic presses for sheet metal forming, as well as complete turnkey systems with automation. Moreover, we can provide you with cost-effective concepts for refurbishing and retrofitting presses. Georg Maschinentechnik is an expert and reliable partner when it comes to robust and high-performance systems technology with customisation.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SAARSCHMIEDE GMBH

Germany

Saarschmiede GmbH Freiformschmiede produces a particularly wide range of heavy-duty forged parts in a variety of grades and processing conditions – blanks, semi-finished parts and even largely processed finished products with complex shaping are all part of our range of products. As a forging plant, Saarschmiede can also provide flexible solutions to all customer requirements in addition to existing product lines. We offer customised solutions to various production depths according to individual customer requirements, along with expert technical advice – from enquiry through to delivery. Moreover, we also complement the scope of our range with custom work. Workpieces in a wide range of weights and sizes – up to a maximum 150 t and 26 m in length – can also be manufactured on request.
ALPHAOVERSEAS

Germany

Alpha Overseas is honored to introduce itself as the prime Exporter and Supplier of Industrial Products. We stepped in the market with the aim to serve the clients with our High Standard Quality products & Best Services so that they enjoy excellent after sales experience with us. For that, we provide a wide array of our Industrial Products that includes Nickel Alloy Products, Pipe Fittings, Duplex Steel, 904L Products, Non Ferrous Products, Monel Products, Alloy 20 Products, Hastelloy Products, Inconel Products, Buttweld Fittings, Forged Fittings and Steel Flanges, etc. The products we offer are sourced from trusted firms assuring their high durability. We pay our utmost focus on maintaining quality of our Industrial Products so as to establish more close relations with the clients. For this, highly technical and qualified personnel support us, utilizing all our available resources to assure the high quality of our Industrial Products. Our hard earned credentials are a result of our ethical business practices and transparent dealings with the clients in the global markets. Our vision is to be the premier exporter & stockiest of Ferrous & Non-ferrous solutions around the world, revolutionizing the supply chains of the industries we serve. We understand that you will be having your respective vendors who will be there for all your needs.
HAMBURGER ANKER MANUFAKTUR

Germany

The original Bügel Anchor is a self-launching, self-righting and self-seting anchor for pleasure crafts and small ships. The original self-righting anchor with roll bar quickly became the international standard as the only anchor with high retention force to manage any kind of anchoring ground. As of 2010, the original one made of shipbuilding steel, which was also handmade in Germany, was not available on markets worldwide anymore.. Since January 2020, it is manufactured in Germany again. Hand-forged in Hamburg, used worldwide The Hamburger Anker Manufactur offers this ORIGINAL STANDARD® again. Handcrafted in Hamburg, Germany. Made of old industrial standard RST 42 thermally refined shipbuilding steel. Hot-dip galvanised and with a forged tip. • Self-righting anchor with roll bar • Very easy to anchor when coming in • High Holding power in any kind of ground • Certified by Germanischer Lloyd • Can be used on any type of bow • Resistant to veering winds and changing tides • Resistant to shock loads from the impact of waves and squalls Hamburg manufactory product • Hand-forged tip • Extremely durable hot-dip galvanising • Corresponds exactly to the patent specifications • Exact anchor shaft angle • Exact bracket angle • Exact fluke edge angle • Made of RST 42 shipbuilding steel
UMFORMTECHNIK RADEBEUL GMBH

Germany

Development, construction, production and sale of aluminium/aluminium alloy drop forged parts. Production structure: Parts and components for the automotive industry. Clutch and brake components, chassis parts, flanges, housings. Decorative surface parts for the bicycle and motorcycle industry. Parts for hydraulic and valve construction. Awning parts. Parts for the electrical industry.
GLAMA MASCHINENBAU GMBH

Germany

Welcome to Glama Maschinenbau GmbH Thank you for your interest in our products. We would be happy to answer any questions you may have. Please contact us. Our products include: •Forging manipulators• Anode service vehicles for the aluminium industry• Charging machines• Handling systems• Industrial robots• Manipulators• Special vehicles• Automation solutions, customised• Automation technology• Handling technology for the metalworking industry

ENERGIETECHNIK ESSEN GMBH

Germany

Energietechnik Essen GmbH – a member of the Georgsmarienhütte Group – bases its capabilities and skills on continuous research and development as well as on experience reaching back to 1811. The Energietechnik Essen GmbH develops, produces and supplies safety-relevant high-tech products, mainly for manufacturers of power generation machinery. When the first turbo-generator was built at the start of the 20th century, the Essen-based company supplied the retaining rings. Retaining rings are placed on the ends of the rotors to fix the copper coil against the centrifugal forces created by the high rotational speeds. The oldest documents in the company's archive relating to non-magnetisable retaining rings date back to 1901. Energietechnik Essen GmbH uses two remelting units, one electroslag remelting unit and one pressurised electroslag remelting unit, to produce the materials for retaining rings.

Website
OTTO JUNKER CM GMBH

Germany

The Otto Junker high-grade steel foundry in Lammersdorf, Simerath (20 km south of Aachen), specialises in special alloys. Our range of materials offers customers a wide selection of high-alloy iron-, nickel- and cobalt-based varieties. These materials are melted in highly efficient induction ovens, using vacuum technology where required. Our range of products includes corrosion-resistant alloys, heat-resistant alloys, non-magnetisable alloys, hard-wearing alloys and multiple special nickel- and cobalt-based alloys. We also make cast ferrous materials designed to handle exceptionally high levels of stress corrosion from JUNKERALLOY® nickel-based alloys. We have been producing and supplying many of these materials for decades. We produce more materials than are shown on our website – about 100 varieties in total.

Website

Product recommendations

Graphitex CR 25-9 - lubricant dispersion for AL forging

Germany

Graphitex WF 19 - synthetic lubricant for steel forging

Germany

Graphitex 289 - dispersion lubricant for forging / forming

Germany

Germany

See more products

VIRO SCHMIEDETEILE FORGING GMBH

Germany

Viro has been producing high-quality hot pressed parts in roughing and finishing work since 1982 for technically demanding applications. As a result of our customer-centric company policy, development of new product areas and high levels of innovation, combined with the perfect command of production technologies, we can point to our continued successful presence in the global market. VIRO produces hot pressed parts in an enormous range of different types, meeting the most stringent criteria. We offer outstanding material structure, enormous compressive strength and spotless surfaces while maintaining low production costs and short delivery times. Our high-quality hot pressed parts are used in many industrial sectors, such as measurement and control technology, electrical engineering companies, the automobile, motorbike and bicycle industries, the heating and sanitary sector, the water meter industry, cooling and air-conditioning technology, the locks and fittings industry.

Website
BROCKHAUS GMBH & CO. KG

Germany

Since 1921, the BROCKHAUS Group of companies has supplied high-quality forged parts for all industry sectors. We place particular emphasis on consulting our customers in a targeted manner right from the start. This is because if the forged shape can be adapted in the early stage of parts development so that it is as close to the desired end form as possible, the processing costs can then be kept to a minimum. Feel free to get in touch with us and find out what we can do for you. We offer customised solutions for your products in proven BROCKHAUS quality.

Website
PFEIFFER METALLTECHNOLOGIE GMBH

Germany

Professional expertise in material selection, product design and production processes for medium- and large-scale series production. Specialisation in use of aluminium profile and forging technology. Extensive vertical integration with assembly and component manufacture, all under one roof. Quick implementation with support all the way from the prototype to production run. High level of flexibility and use of technologically advanced equipment. Aluminium processing, aluminium profile machining in all sizes and machining techniques, as well as shape cutting in aluminium forging and aluminium cast part machining. Precision turned parts, rod and part machining on CNC short automatic lathes, laser and stamping technology, complex sheet metal work, conventional stamping technology.

Website
ERNST THOMAS GMBH

Germany

The company was founded in the 1890s by its namesake Ernst Thomas as a typical ironmongery for the region. Back then, production focused on fittings for wooden crates and forged tools for poking furnaces. After a patent was obtained for the "Muldensteinschraube" (a special screw designed to be used as a fixing point during concrete casting, DIN 529, shape F) in 1909, the focus of production shifted to hot forged and cold formed fasteners. Today, production mainly comprises hammerhead bolts, eye bolts, anchor bolts and special bolts for the construction and mechanical engineering industries. Very long lengths, special sizes, small quantities and short delivery times are our speciality.

Website
ROBERS LEUCHTEN GMBH

Germany

Our family business in Südlohn has been making high-quality lights and wrought iron products since 1964. The ROBERS name stands for tradition, lasting quality and timeless design. We develop lights and wrought iron products in our own home and forge them carefully by hand to ensure that each piece is unique and meets our customers' individual requirements. We use only the highest-quality materials and resources. All of our glass products are hand-blown and are made specifically for us by glassblowers in Germany, Italy and Hawaii.

Website
IAV DREHTEILE GMBH

Germany

We specialise in machining stainless-steel turned parts. Special materials like Hastelloy, Inconel, Duplex, etc. are no problem for our production line. Our production facilities enable us to forge and upset stainless steel. This brings the advantage of working with less material and keeping the costs for material usage lower. Our greatest core competence is thread rolling, an area in which we have more than 30 years of experience. Our production is highly automated and designed for series production, but individual parts or small series can be included in the production plan at any time. We can produce turned parts from a length of approx. 80 mm up to 6000 mm. In terms of diameter, our range starts at 10 mm and we can process a maximum of 600 mm. If your enquiries are slightly below or above this level, please do not hesitate to contact us anyway.

See all products
SCHWARZ GMBH

Germany

The company was founded in 1950 by Franz J. Schwarz as a metalworking and forging business. In 1987, it was handed over to the family's second generation, Siegfried Schwarz, and then renamed Schwarz GmbH in 2007. In addition to metalworking, series stamping and construction fittings, its range of products was extended by ROBUSTA snow guard systems in 1988. Our products include: Snow guards, formwork cleaning machines, snow guard supports, mobile cleaning systems for scaffolding, mechanical engineering

See all products
BGH EDELSTAHLWERKE GMBH

Germany

BGH Edelstahlwerke: Bound to achievement by tradition. The name BGH has been synonymous with achievement in stainless steel for more than 550 years. It was established as a forge in 1466 by Gotthard Busch. Quality and service are part of a long tradition at BGH. Today, BGH consists of six plants and three service centres that offer its customers a wide range and unique variety of stainless steels. And that's not all: We offer first-class service in both our production plants and our service centres in Hanover (D), Katowice (PL) and Cleveland (USA). We produce over 700 different steel grades that are used in the production of fine wire, wire, bright steel, steel bars (round, rectangular and flat), semi-finished products and open-die forging. No matter whether steel for engineering or tools, stainless steel, special alloys or nickel-based alloys, BGH partners customers with high demands around the world. Two-thousand qualified employees are at our customers' disposal in our plants and service centres.

BÖHMER ZERSPANUNGSTECHNIK GMBH & CO. KG

Germany

Böhmer has been assisting customers from the crane building, dock-working, smelting, brick/ceramics, ship building and plant building industries since 1920. Our products range from small wheel sets with wheel diameters of 250 mm for transporters or turntables through to crane wheels of up to 1600 mm in diameter. We also offer rope pulleys in a lightweight welded construction and in a heavy cast smelted design with various different diameters. Our products are based on cast steel parts or forging blanks made by our (exclusively German) partners. Our in-house design and construction department comprising engineers, technicians and technical product designers subjects every product to testing on a test bench in order to bring it up to date with the latest technology and optimise its conditions of use. So you benefit from premium "made in Germany" quality, maximum product service life and outstanding customer service.
JOHANNES GIESSER MESSERFABRIK GMBH

Germany

As one of the global leading manufacturers of quality knives and accessories for professional users, GIESSER produces more than 8000 professional knives per day at its site in Winnenden. The diverse product range comprises 2500 forged or stamped knives and accessories for gastronomy and the food processing industry. GIESSER products stand out for their outstanding materials and first-class processing, and offer the right tool for every requirement. Three factors play a crucial role in the manufacturer of high-quality chef's, kitchen or butcher's knives: The basic materials, the hardening method and the processing. Traditionally, the GIESSER family company only uses basic materials and procedures that guarantee that the product created at the end of the production chain will be valued by users and will make their work easier.
GLOBAL METALL GMBH

Germany

Global Metall Gmbh is an internationally active dealership with more than 30 years' experience dealing in specialist steels and non-ferrous products: dealer in welding electrodes, dealer in drawn wires, dealer in bright steel, drawn precision profiles, forged parts for shipbuilding, forgings for petrochemical components, tool steel to customers' requirements, forged flat steel, steel for heat-treatable springs, forged flat steel, cold-headed wire, forgings for energy
HESONWERK GMBH TRANSPORT-, LAGER- & UMWELTTECHNIK

Germany

HESON is a traditional firm with more than 120 years of experience in providing solutions to your problems in the areas of transport, storage and environmental technology, casting technology and machining. Our products are used in every industrial sector: From the automotive industry, automotive suppliers (foundries, forges, mechanical manufacturing, the screw industry), high-bay storage and automation technology, and the waste-disposal industry through to the food industry.
HESONWERK GMBH PRETZSCH TRANSPORT- UND LAGERTECHNIK

Germany

For over 120 years, the traditional company HESON has been a reliable partner for solving your problems relating to transport, storage and environmental technology, foundry technology and mechanical machining. Our HESON products are used in all branches within the industry: From the automotive industry, automotive suppliers (foundries, forges, mechanical manufacturing, the screw industry), high-bay storage and automation technology, and the waste-disposal industry through to the food industry.

Find quotes for

Filters

Results for

Forged products - Manufacturer Producer - Germany

Number of results

25 Companies