leakage test Germany

...We are experienced in test system development for leakage testing, life time testing and end-of-line test stands in the field of gas & hydrogen technology. We also have a network of suppliers and partners who provide key components for leakage measurement, piping, sealing and instrumentation. As a general contractor and integrator, Merecs Engineering can individually design, assemble and commission the test system at our customers' sites.

...In order to ensure that castings, valves, pumps, hoses and other components or groups have been manufactured free of leakage, they are tested in non-destructive leakage tests. Oxygen, air, nitrogen or sulfur hexafluoride (SF6) can be used as the test medium.

... * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌...

...Based on our decades of Knowhow we offer you test stands on the drive engineering sector, which are able to measure and generate the following technical paramete Component testings Leakage testing for all pressure and temperature ranges and all media Our test stands are able to generate, collect and analyse all appearing physical parameters. We set up the necessary programs on state-of-the-art computer systems. The display and control parameters of the test stands are visualized on touchscreens. The whole construction is optimally matched to your requirements.

...Apparatus for pressurizing test pieces We offer burst test benches to test load-bearing elements under pressure for their resilience. The components to be tested are put under pressure until they burst. Depending on the requirements (e.g. depending on the medium, pressure range, static or pulsating tests) we build your customized test stand. Overpressure at the test item:0..500 bar Temperature test item: -40..+200°C ...

...The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary. The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack. The DPT 100 with optionally RS485 interface uses the communication...

... Wear reduction at maximum loading Prevents leakage with angled or vertical shafts due to good adhesion on metallic surfaces Flowing structure prevents grooving in gear units with continuous coverage of surfaces Operating temperature:-30 °C → +120 °C NLGI grade:0 DN factor (dm x n):600,000 mm/min Base oil viscosity (40 °C):120 mm²/s Four-ball test rig (welding load):3,000 N...

...The automatic leakage tester used to control the tightness of CO2 inert gas packaging allows even the smallest leaks - even in the micro range - to be detected.The package is tested by simply placing it in the vacuum chamber. The automatic test cycle starts when the lid is closed. The unit generates a user-defined vacuum during this process. After the vacuum is reached, the sensor is set to the...

...Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes.In our product portfolio for measuring electrostatic charges and leakage resistances you will discover systems and products for many industrial sectors. Personnel grounding tester PGT120: Electronic test apparatus for checking...

...Force and positional monitoring test machine for determination of the spring characteristic on air springs including leakage test.

...Test rig for the leak test of headlights.

... systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.

... allow for optimal monitoring of the fitting onto the pipe, and in the case of unpressed connections, the forced leakage during the pressure test ensures that these connections can be localized. Pipe connection press sleeve: 16x2 mm Screw connection: 1/2 inch female thread Press contour: TH and U Max. operating temperature: 95° C Continuous load capacity: 10 bar / 70° C / 50 years DVGW (DW-8501BS5049): Tested and approved for drinking water pipes KIWA (K-98456/01): Certified...

... Tests for: - High voltage - Insulation - Protective conductor - Leakage current Due to the modular design, the components can be combined into complete VDE0113 / EN60204 testers. This device series is particularly suitable for customers who need to test small to medium quantities, where manual contact with the test object using HV guns, protective conductor testing probes, etc., is sufficient.

... is suitable for temperatures up to +300 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +300 °C Temperature with LiveLoading: t +300 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Control Valves Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Approvals TA Luft / VDI 2440 Certificate ISO 15848-1 CC1 ISO 15848 test was conducted with 20,000 mechanical cycles and 2 thermal cycles (RT, +200 °C) and passed with a leckagerate of 6.1 x 10 -4 mg/s/m.

... oxygen and flammable gases) Display: - Data logger function with screen playback - Selectable graphical display - Operation via high-resolution touchscreen display - Intuitive, symbol-driven simple menu structure - Min/Max/Average display Options: - Switch test/analog output option - Switch test/voltage-free contact option - "Aeronautical" option - Leakage test option...

... compensation for standardized leakage assessment Channels to be tested are freely combinable Test pressures (differential pressure method) are freely selectable Changeover devices: for different test specimens convertible with overhead crane motorized/pneumatic delivery of seals for the test specimen from 5 sides detection system for defective seals (O-rings and rubber discs) Made in: Germany...

...This leak testing machine allows for the testing of automotive industry mufflers. A handheld scanner scans the DMC and loads the corresponding program. After pressing the start button, the openings are sealed, the muffler is pressurized with test air, and the leakage rate is evaluated. A printer prints a label for application on the muffler for parts that pass inspection. The data of the muffler is then stored in a database.

...Quality made by Siempelkamp Based on decades of experience and using state-of-the-art technology, we oer individual, comprehensive testing of your components. Key features Advantages highly-qualied sta numerous certications (see download area) individual pressure and leakage tests non-destructive testing methods (VT, PT, MT, UT and test station for RT) Innovative 3D laser and video scan measurement techniques decades of experience mobile hardness testing greatest accuracy state-of-the-art technology...

... | HRL | Storage and retrieval systems (AS/RS) equipment | non reversible | Leakage-free | Shuttle energy absorption:up to 700 kNm Installation position:any Energy absorption direction:in pull direction or in push direction Design:very short length Safety:high buckling safety, non-leaking service :maintenance-free Temperature:built for extreme temperature ranges...

... carefully chosen for each rubber seal, as each rubber molded part is subjected to different stresses. The leakage of liquids can have devastating consequences. Therefore, the sealing rubber must not tear even under strong friction. Often, seals are only approved for use with an official test number. This allows for research in case of an incident to address potential errors in the future. Rubber seals are also suitable for applications with high mechanical loads or extreme temperature influences.

...motors, generators, and many other devices. Model PAD 10-25 10kV AC and 25kV DC 0.1 to 10mA AC and 0.02 to 5000µA DC up to 150 GΩ in the test cycle at 0.5 / 2.5 / 5 or 15kV DC Model PAD 56 5kV AC and 6kV DC 0.1 to 5mA AC and 0.01 to 5000µA DC up to 1 TΩ in the test cycle at 2.5 or 5kV DC Model PM6 6kV DC 0.01 to 5000µA DC up to 1 TΩ in the test cycle at 2.5 or 5kV DC Model PM15-2 15kV DC 0.01 to 2000µA DC up to 3 TΩ in the test cycle at 5 / 10 or 15kV DC...

...The CETATEST XS is a compact, cost-effective, and fully automatic leak testing device designed for detecting leaks in components within the production process cycle times. The testing device is specifically designed for leak testing small-volume test parts and short overall testing times. It is equipped with a pressure measurement cell that detects the pressure loss due to leakage during the...

... • Installation of compressed air lines • Compressed air consumption measurements with corresponding expansion • Leakage testing of compressed air networks • 24-hour emergency service If you wish, we offer tailored service contracts specifically for your compressed air systems. You hand over the responsibility for the system to us, and we take care of maintenance and inspection tasks at specified...

... leakage current Measuring the housing and patient leakage current Depending on the types of electrical devices, systems, and equipment, the protection class, and the type of measurement, different quantities are recorded and evaluated. Functional Testing Upon request, electrical devices, systems, and equipment can additionally undergo a functional test after passing the inspection. Inspection Label...

... ensure material integrity, high-pressure test and leakage testing equipment, air tightness testing equipment, angle testing devices, and solid melting furnaces, among other advanced equipment, showcasing our first-class technical capabilities.