high-pressure pumps Germany

...The high-precision components for diesel high-pressure pumps are assembled in a clean room. Automatic assembly and testing of suction valves, as well as selection and pairing of components in the 0.1 μm range, are the key processes to highlight. The finished components are packaged in a classified manner. All process and assembly data are archived and statistically processed by the MP assembly control computer.

...The compact, cost-effective MAXIMATOR high-pressure pumps are powered by compressed air or other gases between 1 bar and 10 bar.

...We are exclusive distribution partners for high-pressure pumps of the Italian quality brand Leuco / HAWK throughout Germany.

... possible - Larger flow rate range possible - Increased safety against shaft breakage under overload due to innovative design Medium: Melt, Polymer Actuation: Electrically operated Self-priming: Yes Technology: Gear Application area: Industry Other features: Flange, Pressure increase...

...In addition to the standard range of high-pressure plunger pumps, we also offer a wide selection of stainless steel pumps made from various materials, catering to the needs for special applications. Equipment with special seals such as Viton, Teflon, and FFKM, among others, is generally available upon customer request.

...Hammelmann is one of the leading providers of high-pressure technology internationally. Founded in 1949 in Oelde, we have decades of experience in the development and manufacturing of high-pressure pumps and cleaning devices. As a medium-sized company, we possess the necessary flexibility to produce "Hochdrucksysteme nach Maß." Partnership-based collaboration, quality, and reliability have been a tradition at Hammelmann. Our employees see this as a daily commitment.

...High-pressure pumps, ultra-high-pressure pumps, process and industrial pumps, cleaning pumps, pressure transducers, and channel flushing pumps...

...Caprari pumps provide solutions for water extraction, wastewater pumping, and drainage, as well as water supply and distribution in civil, industrial, and commercial sectors. Well Pumps Borehole Shaft Pumps Dry-installed Pumps Multistage Horizontal High-Pressure Pumps Multistage Horizontal Centrifugal Pumps Multistage Vertical Pumps Single-stage and Multistage Centrifugal Pumps...

... enable precise measurements and thus provide a reliable basis for the control and optimization of industrial processes. From pressure and temperature sensors to flow meters, we offer a variety of solutions that enable accurate recording of process parameters. Versatility for various applications: Our range of industrial metrology includes a wide range of products suitable for various applications, be it chemical, petrochemical, food, power generation or other industries.

...Submersible pumps or booster pumps made of stainless steel in 12 V or 24 V versions Voltage: 12 V or 24 V Flow rate: max. 15 l/min Lift height: max. 6.5 m Delivery pressure: max. 0.65 bar Power consumption: 20 - 30 W Cable length: 1.5 m, viton-coated Housing: Stainless steel, seals: Viton Continuous lubrication: High-performance PTFE grease Diameter / Height: 44 / 130 mm Hose connection: 10 mm Special feature: dismountable Lift height: max. 6.5 m Flow rate: max. 15 l/min Country of origin: Germany Voltage: 12 V DC or 24 V DC...

...Equipped with exterior spring load to more quickly close the flap and avoid flap impact Type RSK-UD: Bypass line with pressure shock damping valve to reduce/avoid pressure shocks Type FTUD: a combination of the above types to optimally protect the pumps in case of a power outage, etc. Housing:EN-GJL-250 (GG 25) Coating:Acrylic combination paint...

... exactly defined pattern and that all test data is automatically recorded and stored. Applications: Quality assurance in the manufacturing of diesel injectors and high-pressure components Functional testing of valves, pumps, and injectors in the automotive industry and in fluid and medical technology.

...All information at a glance: "Lubricant and Plant Oil Pump Viscomat 70 230 V (self-priming)" Flow rate 25 l/min Max pressure 6 bar Vane pump, providing high flow volume at high pressures Pump body made of die-cast aluminum Rotor made of sintered steel with resin vanes Seal for rotating shaft accessible from the pump side Integrated bypass line in the pump body Connection on both sides 1...

...Fluid-dependent customizable dosing pump The micro annular gear pump mzr-7243 of the modular pump series is suitable for dosing and metering in low to medium pressure and viscosity ranges. To the main assets of this series belong low pulsation, high precision low volume dosage of non-lubricating liquids, compact design with smallest dimensions and low price. These pumps are suitable for dosing...

... filling of the pump. The ring piston pump can also be used as a dosing pump, as it features automatic wear compensation. The stainless steel pumps are available from 2 l/h to 65 m³/h also as rental pumps from us. This pump combines many advantages: 1. hermetically sealed according to TA Luft 2. wear compensation makes it suitable as a dosing pump 3. dry self-priming, no filling required 4. compressor effect, pressure lines are emptied, product savings = profit with EHEDG certification: no dead spaces...

...Axial Piston Pump AV 10 VSO Available immediately: 28 cc, 45 cc, 71 cc - Adjustable pump with axial piston drive in swash plate design for hydrostatic drives in open circuits - Continuous flow rate adjustment is possible through the adjustment of the swash plate - 2 leakage fluid connections - Good suction behavior - Permissible continuous operating pressure 280 bar - Low noise level - High...

...Submersible pump (PP), for basement drainage with 10m cable 230V / 50Hz, P1= 440W, IP 68 Pressure connection G 1" G without & with (NS) float switch / with internal level control (NSP) Impeller and guide vane made of thermoplastic with high wear resistance 10 mm grain size, T (max) = 35°C H (max) = 8.5 m, Q (max) = 9.0 m³/h Submersion depth (max) = 5 m...

... SIKA meets requirements that other providers often cover only with multiple pumps. With SIKA test pumps and pressure generators, it is possible to test, adjust, and calibrate pressure sensors, manometers, pressure switches, safety valves, and pressure devices of all kinds. They are optimized for function and handling, helping you to fulfill the specified testing and inspection tasks. Pressure range: -0.3...60 bar Pressure medium: Air...

... cooling through pumped medium that flows around it - Available with motor protection - Automatic level regulations is optional - Pressure port with quick-release coupling, flange, hose nozzle or Whitworth thread - High-quality materials for application in service, industrial and seawater PERFORMANCE RANGE Delivery volume Q = ... 450 m³/h Delivery height H = ... 65 m...

...Zero filter technology optimizes water for high-pressure pumps Performance Data Permissible water inlet pressure: max. 10 bar Pressure reducer setting: max. 5.5 bar Water inlet temperature: 10 to 35°C Maximum flow Qmax: 16 liters/min Operating conditions: Conductivity at water inlet: 200 to 1200 μS/cm TDS at water inlet: 140 to 840 ppm pH value: max. 8.5 Copper (Cu): max. 2 mg/l...

... is particularly suitable for installation in existing systems where the pump's differential pressure is too high during periods of lower flow demand, but it is also suitable for use in domestic hot water systems.

...A high power density in a compact space – this doesn’t have to be a contradiction. Our robust 3-speed gearbox fits perfectly into your machines – leaving more room for other components. This is especially beneficial for mobile machinery, where the extremely compact dimensions and low weight pay off. This special gearbox has also proven itself in numerous applications with high-pressure piston pumps.

...robust design: protection class IP 54 lightweight and easy to handle: only 563 g backlit, high-contrast display with a thick 1.8 mm protective glass display resolution: 5 digits integrated calibration protocol with display of due calibration in days leak test, tare, maximum/minimum, and filter intrinsically safe IS version for explosive environments optional ATEX/IECEx or INMETRO certifications available for the IS model optional remote plug-and-play pressure modules PM700E optional resistance thermometer RTD (PT100) optional pneumatic and hydraulic hand pumps...

...Vacuum-tight gap tube blower for plant construction with ATEX certification for Zone 0, also suitable for use in cleanroom conditions. With 14 sizes in CM design for aggressive gases and 9 sizes in HM design for neutral gases, they represent the largest series on the market. Volume flow: 110 to 15,330 m³/h Pressure: 10-5 mbar abs. to 200 mbar abs Conveying medium: Air, oxygen, as well as neutral, toxic, flammable, explosive, corrosive gases or gas mixtures.

...FOSSER HLP hydraulic oils can be universally used in all hydraulic systems, even under the most challenging conditions. In thermally highly stressed hydraulic systems with high-pressure pumps of all types, in sensitive control systems, as well as for powering small drives and for use in circulation systems.

... at pressures up to 20 Bar. PTFE is also sterilizable, making it safe for use in the pharmaceutical, food, and chemical industries. Additionally, we offer a surface seal on the lid made of PTFE, which, alongside its all-round resistance properties, ensures higher flow rates against high pressure.

...The spiral gasket is the ideal sealing solution for applications with high demands on pressure and temperature. Its use in pipelines and equipment in the chemical, petrochemical, oil, and gas extraction and transport industries, as well as in valves and pumps, has been proven for many decades. The spiral gasket, due to the V-shape of the metallic winding band, is the only gasket with significant...

...High-pressure ER3 centrifugal pump; slurry pump with air-cooled electric motor for stationary use as a tearing mixing pump and stirring mixing pump in pits and containers.

... Technical Data: - Pressure ratio 1:25 - Delivery rate 80 ccm/double stroke - Max. operating pressure 200 bar - Weight 50 kg - Air consumption approx. 300 l/min To operate, you need a compressor with an air output of approx. 300 l/min.

...Kärcher Hose Set PrimoFlex Plus 10 m, 3/4" for Kärcher pumps extremely robust, flexible, and kink-resistant pressure rating 30 bar high temperature resistance from -20° to +65° for use with the Kärcher SP5 Dirt protection water pump, you will need a small pump connection piece (not included, Kärcher item no. 6.997-359.0)...