impeller pumps Germany

...The impeller pump is a DRY self-priming pump suitable for many types of media, including viscous media! and liquids with soft solids. (Impeller resistance must be considered) Stainless steel impeller pump 80 liters/minute Displacement pump Flow rate up to 80 l/min Dry self-priming up to 5.0 m Pressure up to 2.5 bar *Optional up to 4.5 bar Weight: 15...

... Pumps The impeller made of PTFE is movably arranged on the pump shaft and is supported on both sides by sliding bearings made of SiC. Inside the pump housing, two SiC insert rings are arranged. A constant gap distance between these elements, regardless of prevailing operating conditions, is ensured at every tightening tension of the housing anchor screws.

...In motorsport applications, the mechanical water pumps are replaced by electric water pumps. This change gives the engine more power.

...Pump F 430 PP 100/50 in polypropylene was designed for higher delivery pressure. Instead of a rotor, it is equipped with an impeller in a pump housing. In connection with the powerful FLUX motors the pump delivers a far higher pressure of over 3 bar compared to pumps with semi-axial rotors. This makes it especially convenient for conveying media out of e.g. IBCs and other containers into higher...

...The B2 Battery Drum Pump is suitable for thin, watery to slightly viscous media. The set is designed for extracting small containers such as canisters or hobbocks. The pump is flexible at all times, conserving important resources. The set is delivered without a battery and charger. * optional impeller shape as a wheel or rotor * battery life of 35 minutes at maximum speed * 1 battery charge...

We see ourselves as an extended workbench, serving as a mechanical engineering supplier and provider for the industry that requires gearbox components. Our customers come from marine, rail, wind power, special gearboxes, and plant engineering. Our company continuously invests in new manufacturing technologies to be prepared for future challenges. We realize standardized, but also highly complex an...

... 10 m. The maximum flow rate reaches an impressive 13,000 l/h. The powerful 750-watt maintenance-free motor of the TWP 7505 E submersible pump for clear water transports clean or slightly dirty water containing dirt particles of up to 5 millimeters. Pumped product: for clear water Drive: electric Priming: self-priming, submersible Technology: impeller Mobility: portable Type of protection: maintenance-free Other features: for wells...

...Submersible Pumps For NC machining with coolant supply through the tool holder or the drive spindle, or tools with internal cooling, the TS pump types are ideal. These pumps operate with a double-sided open impeller, allowing for relatively high pressures while maintaining compact pump dimensions. They should be protected from coarse contaminants in the coolant. To reduce the pump pressure, the...

...Features: - capacities up to 6000 GPM - heads up to 700' TDH - External impeller adjustment - Renewable shaft sleeve - Heavy duty shaft and bearings - Available in stainless steel - Cast iron bases available Applications: - Paint systems - Filtration systems - Paper pulp - Municipal systems - E-coat systems - Wastewater - Oils - Chemical processes...

...With VORTEX impeller | Suitable for wastewater Article number: 571599030021 Delivery height: up to 7 m Delivery quantity: up to 24 cbm/h Immersion depth: up to a maximum of 10 m Connection pressure fitting: 2'' internal thread Operation: with 230 V...

...Submersible pump (PP), for basement drainage with 10m cable 230V / 50Hz, P1= 440W, IP 68 Pressure connection G 1" G without & with (NS) float switch / with internal level control (NSP) Impeller and guide vane made of thermoplastic with high wear resistance 10 mm grain size, T (max) = 35°C H (max) = 8.5 m, Q (max) = 9.0 m³/h Submersion depth (max) = 5 m...

...The centrifugal pumps with peripheral impeller, Pedrollo PQ-EKO, are suitable for use in households and industries due to their hydraulic properties combined with their compactness. The PQ-EKO centrifugal pumps with peripheral impeller are ideally suited for use with clean water that does not contain abrasive particles, and liquids that are not chemically aggressive towards the materials from...

...oddesse-propeller pumps are used for irrigation and drainage of agricultural areas, water-level regulation, oxygen enrichment of breeding water at fisheries, trimming of ships, ferries and tankers and so on. EXECUTIONS - Single-stage centrifugal pumps with open semi-axial impeller - Submersible, rewindable and water-filled motors with protection level IP 68 - Motor cooling through...

... advantages: »»highest chemical resistance »»robust design - without vulnerable (floating) axles »»low-maintenance through double hydro-dynamic slide bearings with extra big radii »»long-lasting and wear-resistant through axial thrust compensation »»half-open impeller (i.e. solids up to 3 mm of grain size and 10 Vol. % are possible) »»no metal parts are in contact with the medium »»easy to maintain (wear parts can be changed swiftly) »»universally applicable, quiet and compact »»available as explosion proof version for combustible environments...

... liquids Operating Pressure max. 12 bar Shaft Seal GLRD made of carbon/ceramic/NBR Operating Temperature max. approx. 100°C Connection Thread 1 1/2″ IG Weight 25 kg Material Housing, impeller, wear plate made of GG, shaft made of steel Motor Single-phase variant 230V/50Hz; 1.5 kW Three-phase variant 400V/50Hz; 1.1 kW Speed 2900 rpm Protection Class IP55 AC Version Complete with carrying bracket, connection cable, motor protection switch, and plug.

...Freshwater Pump SDMO HONDA Engine GX 120 C5, max. delivery rate 600 liters/min (36 m³/h) Pump height 29 m, protection class IP 23, self-priming, impeller made of graphite cast, spiral made of graphite, mechanical seal carbon/ceramic, centrifugal pump for drainage and dewatering, suitable for pumping clear or moderately contaminated media, standard equipment includes sieve, screw connections...

...125-2100 CFM / 210 to 3,560 m³/h The NASH TC/TCM liquid ring vacuum pumps are highly reliable and efficient. These pumps, with their integral two stage impeller, are able to condense process vapors and to recover or dispose of the vapors. Another benefit of these pumps is that they can attain vacuum levels down to 0.8" HgA (20mmHgA). This is approximately 40 percent lower absolute pressure than a single stage pump. The NASH TC and TCM models are designed to handle large amounts of liquid carryover without difficulty. This ensures reliability under the most demanding applications.

... themselves thousands of times. The pumping of slurry with litter, straw or food residues as well as well as waste water sludge is carried out by a special formed inlet nozzle and a screw impeller with armoured Widia steel (for the S version).

...Multistage Sealless Centrifugal Pumps with state of the art magnetic coupling technology that results in a leak-proof design. Multiple impeller diameters allow for enhanced hydraulic selection. Suction Port Size:: 1.5 in Discharge Port Size:: 1 in Connection Types:: NPT, BSP, or Flange Maximum Specific Gravity:: up to 1.5 Maximum Working Pressure:: 80 psi (5.5 bar) Type:: Multistage Sealless Mag Drive Configuration:: Horizontal Construction Materials:: Polypropylene or PVDF O-ring Materials:: FKM, EPDM, or Aflas® Bushing Materials:: Carbon, PTFE, or Ceramic Shaft Materials:: Ceramic...

...With our flat suction technology, you can completely pump out liquids. The pumping works optimally with our flat suction mat and with a diaphragm or an impeller pump. Also suitable for oils, fuels, and many chemicals.

...For example: GARDENA Dirty Water Pump 20000 inox • 10 m connection cable • Plug-in device for the float switch • Float switch • Multi-stage mounting device for the float cable • Thermal protection switch • Connections for common hose sizes • Low-wear pump impeller...

As a manufacturer of impeller pumps, wastewater pumps, and pumps for biogas plants, ZUWA specializes in pumps and spraying devices for industry and also provides pumps for plant protection and refueling sets for AdBlue. In addition to impeller pumps, ZUWA also offers drilling pumps, sewage pumps, and PTO pumps, making it a reliable partner in domestic water supply, pest control, and plant...

We offer top-notch pump services for eccentric screw pumps, impeller pumps, barrel pumps, centrifugal pumps, dosing pumps, mash pumps, and industrial pumps. As a supplier of high-quality replacement parts in original equipment manufacturer quality, we provide our products with fast delivery times and fair prices. By collaborating with selected partners from the pump industry, we are able to offer...

Sales and manufacturing of pumps and pumping systems (positive displacement pumps (rotary lobe pumps, hose pumps, impeller pumps, diaphragm pumps). Hygienic pumps secondary circuit pumps.