hot-rolling Germany

...Hot rolled steel is a type of steel that is formed by the hot rolling process at a temperature above its recrystallization temperature. Steel is easier to form at this elevated temperature. Compared to cold rolled steel, hot rolled steel does not usually require heat treatment after forming. Hot rolled steel usually has more mill scale than cold rolled steel.

...CRC Cold Rolled Coil is a steel product made by cold rolling hot-rolled flat steel. It is characterized by its thin gauge and specific applications. CRC is often used in technically demanding and visually important areas. Available lengths and dimensions: The exact available lengths and dimensions for CRC Cold Rolled Coil may vary. Please contact EDER for specific information and quotes...

...Lubrication of temperature-stressed machine parts, e.g. rolling bearings, friction bearings, slideways, chains, rollers or moving parts in hot forming, heat treatment or drying Dry lubrication, e.g. of kiln and rack-truck bearings, bearings of pouring ladles, converters or hot-air blowers at temperatures over 250°C Lubrication of plastic and rubber at normal temperature when the materials...

... and dry hot air volume of up to 600 m³/h. Even outdoor work does not affect the IDE 20 fuel oil heater blower, as it features a robust double-coated housing mounted on a smooth-rolling cart structure, complete with a cable holder and an installed fuel tank. And if you use the optionally available smoke gas extractor, this heater can also be employed for fully automatic heating of enclosed spaces.

... arrive. Thanks to their strong adhesion and stretchability, these digital transfers can be used on casual wear, sportswear, and workwear. Suitable for cotton, polyester, mixed fabrics, nylon, artificial leather, and many other textiles. Furthermore, the transfers can be applied at low temperatures below 130°C, which means that even delicate fabrics can be easily printed on. The instant peel film also ensures that the film can be removed hot (directly after pressing) or cold. Also available in LIGHT, DARK or ATHLETIC.

...ELKALUB GLS 795/N3 is a synthetic high-temperature grease designed for the lubrication of rolling and sliding bearings in a temperature range of -40 °C to +200 °C and at low speeds. The high content of solid lubricants supports all types of sliding operations; the grease is also vibration-damping. ELKALUB GLS 795/N3 is adhesive, water-resistant, and extremely aging-resistant. In hot air streams...

... contamination detection system Remote configuration software for temperature recording and on-site calibration Monochrome and bichrome models APPLICATIONS Induction heating Lighting lamp production Glass melting and forming Semiconductors Lime & cement kilns Incineration Steelmaking / Metallurgy (Metalworking * Forging * Hot rolling of flat products * Wire and bar rolling * Heat treatments...

... ideal working conditions and protection of control and power electronics > Excellent suitability in high-heat operations, e.g., steelworks, foundries, and hot rolling mills, as well as for port facilities and container terminals > Globally tested and successfully deployed...

... structure, then hot- and cold-rolling procedures achieve high surface quality. “Bright rolling” delivers the highest possible surface consistency and reflectivity. The result is an aluminum surface reflective enough to be used as a mirror.

... systems are used wherever high-precision thickness monitoring is required for control and quality assurance. Both in hot rolling mills, in continuous casting plants and in cold rolling mills and service centers, the Micro-Epsilon measuring systems operate reliably and with maximum precision. Numerous, successful installations in 13 countries around the world in milling lines and processing lines speak for themselves.

... as covers for chemical, degreasing, coating, or paint tanks, e.g., for containing hazardous vapors. The main advantages: - Heavy, solid construction - Custom dimensions - Solid, continuous stainless steel surface - Resistant to hot chips, cooling, and grinding fluids - Individual segments can be replaced - Rolling mechanism available with or without housing Versions: - Width and length as desired.

... lubrication points at high operating temperatures, high bearing pressures and aggressive environmental conditions. Application Castrol Molub-Alloy 100-2 HT is a high-temperature grease for the lubrication of rolling and plain bearings and is used in fan bearings in hot air flow, calender bearings, baking systems and continuous drying chambers as well as for overhead conveyors of painting lines...

...Kämpfer Würz manufactures rollers and rolls for all types of rolling mills in the cold and hot forming sectors, including those with concave or convex surface contours. KÄMPFER WÜRZ produces work, intermediate, and support rollers for all cold rolling goods and all types of rolling mills. We supply rollers with a diameter of up to Ø 630 and a maximum length of 2500 mm. In terms of roundness...

...Needle rollers for hot perforation can be made from various materials depending on the working temperature. Please contact us for your application!

...-sturdy steel construction -ideally situated loading centre of gravity -can be emptied at any height by cable -operated from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -Surface spray painted or hot-dip galvanized -Volume (approx. in m³): 0,15 / 0,30 / 0,60...

...Zenner hot gas fans transport media at temperatures up to 800°C. In doing so, we use heat-resistant stainless steel, high-temperature greases, and mechanical cooling components to ensure safe operation. An optional thermal insulation can be installed, which covers hot housing surfaces or prevents heat loss. Additionally, we are capable of implementing active supplementary cooling that operates independently of the fan. When the fan is turned off, this system continues to run, thereby protecting particularly vulnerable components such as rolling bearings. Manufactured in: Germany...

...From turbine disks for aircraft to pipeline pipes in the oil and gas industry to longitudinal beams in trucks: In our key industries of automotive, energy, rail and aerospace, we offer the right solution for every product. We supply not only the press, but also the associated process technology. Our range of services includes forging, thick sheet metal forming, raw forming, sheet metal forming and ring rolling. Our special systems for metal forming offer the perfect balance between the use of standard components and a custom-made design.

... mandrels themselves are produced through rolling or forging, heat-treated, and surface-finished by peeling. Final machining is done on CNC lathes. Subsequently, the mandrels are either nitrided or chrome-plated.

...Unitechnik has extensive experience and expertise in the field of cold and hot rolling technology.

...For full ceramic bearings or hybrid bearings, hot isostatically pressed silicon nitride (HIPSN) is generally used, at least for the rolling elements.

...The Millseal Rolling is a continuous hot sealing machine with an automatic conveyor system featuring a photoelectric cell. The technology applied in this machine allows for an automatic, fast, and efficient workflow. Additional advantages of the Mocom Millseal Rolling hot sealing machine: - Electric control of the sealing process - LCD monochrome display with soft-touch keyboard - Continuous...

...Diameter: 15-65 mm Tolerances: EN 10060 P Length: 3000 - 8500 mm Bundle weight: 1 - 3 tons Lower tolerances: < 22 mm +/- 0.15 mm, < 32 mm +/- 0.20 mm, < 38 mm +/- 0.25 mm O.R.I. Martin manufactures rolled bars from special steel grades with a diameter of 15 to 65 mm. The production takes place at a controlled temperature in a state-of-the-art rolling mill, ensuring a fine-grained and homogeneous structure. The finishing/calibrating block allows for rolling the bars with a tight size tolerance.

...Forming gas is a collective term for gas mixtures containing nitrogen and hydrogen. The mixture of nitrogen and hydrogen is used as a shielding gas in the hot processing of metals, e.g., in soldering, welding (for root protection), rolling, annealing, and pressing. Forming gases are non-toxic, but can be flammable at higher hydrogen concentrations. Forming gas according to DIN EN 439...

... longer service life. The rotary unions of the DX, DXS series (DN 10 – 150) are also available in ATEX-certified versions. Rotary unions of the DX series are suitable for: Cooling water (Series DX, DXS) Hot water (Series DXS)...

...Flat steel products in roll or sheet forms obtained by cold-rolling of hot-rolled flat steel, with thicknesses ranging from 0.20 to 2.00 mm. meeting the expectations concerning the surface flatness and the width and thickness variation and the physical properties of the produced materials fully remain homogenous. Common Grades; As per EN 10130 DC01/DC03/DC04 , ASTM A619/DQ, SAE 1010 /1008/1006...

...•Blank steel and rolled steel •Quality steel and special construction steel for automotive applications, die forging, spring manufacturers, machine shops, mechanical engineering •Steel mill with continuous casting plant + hot rolling mill...

...The containers are positioned in the box and are tilted forward on the wheels for filling. The wheels are placed in a designated small recess to prevent them from rolling during tilting. To ensure that the containers do not tip over, they are secured by a catch rope. The lid can then be easily opened. The doors are hot-dip galvanized.

...We offer you the following services in the field of thin film technology: • Manufacturing of sputter targets according to customer specifications (metals, alloys, semi-metals, non-metals, ceramics, conductive targets) • Bonding of sputter targets to substrates (copper, molybdenum, tungsten, and others) • Milling of shapes and drilling of holes in sputter targets • Coating with conductive and non-conductive layers, optical layers, DLC coatings • Powder metallurgy, alloying, pressing, sintering, cold and hot rolling, vacuum arc melting, induction and zone melting...

...The VBP series systems are offline measurement systems that capture the cross-section of strips from cut samples with high precision and tactility—meaning they are independent of the alloy. They are commonly used in hot rolling mills for aluminum and steel, as the cross-section is adjusted for all subsequent uses of the strip; the capture of the cross-section is of great importance at this stage...

...Stainless Steel Drill sharpened HSSE CO 5% Cobalt with a 135° cross-cut from 3 mm for steel over 800N/mm². This drill has a balanced flute-to-web ratio, allowing it to transmit maximum torque. The core is designed normally, which reduces feed forces in conjunction with the cross-cut. Application: Steel, high-alloy steel, V2A, V4A, tempered, case-hardened, hot-work, cold-work, rolling bearing...