high current connector Germany

...The connectors are available in standard or high density configurations with the familiar pin counts. Housing material: Tin-plated brass, stainless steel Pin count Standard: 9-, 15-, 25-, 37-, 50-pin Pin count High Density: 15-, 26-, 44-, 62-, 78-pin Connection type: Straight/angled solder pin, solder cup Current carrying capacity Standard: up to 7.5 A Current carrying capacity High Density: up to 3 A Quality level: 1-3...

... designed for demanding applications and offers a range of features that make it the ideal solution for your projects. Main Features: - Increased rated voltage and current: With a rated voltage of 1000V and a rated current of 200A at 40°C, this connector is designed for high-performance applications. - IP67 protection class: Provides high protection against dust and water when connected. - Crimp...

...N&H realizes custom connectors based on, among other things, spring contact pins. Due to the variety of spring contacts, particularly small connectors, waterproof solutions (IPX6 / IPX7), and special solutions for high current applications can be implemented. We also offer cost-effective manufacturing of complete assemblies with connectors and cable assembly. We provide detailed advice on...

... Width 83.00 mm Layup Number of Cells 120 Number of Cell Strings 6 Number of Cells per String 20 Cell Division Half-cut Cross Contact Color Silver Busbars Color Silver Laminated Structure Optics Classic Laminated Structure Glass-Glass Glass Type Fjord Glass Surface AR Color of Cell Interspace White Connection Technology Connector Type Stäubli MC4-Evo2 Operating Conditions Max. System Voltage IEC...

... the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy. Installation size:NEMA11/flange dimension 28mm Protection class:IP40 Holding torque:0.12Nm nominal current: 1.00A Motor connections:stranded wires with JST connector, encoder with JST connector...

...Connectors are used to separate and connect lines (for electrical current or, for example, optical radiation, generally technical media). In the connector sector, there are high demands to ensure a low resistance when current flows. Connection points are potential problem areas. Therefore, we pay special attention to the quality of the strictly selected materials, usually in brass or copper...

... 6,500 K) • Smallest dimensions of only 10.5 x 5 mm • Minimum bending radius of just 5 cm (only one axis) • Connection via 3 m cable with free wire ends or 0.35 m cable with M8x1 connector (VIA PowerNet) • Constant current and high copper content in the FPC ensure long lifespan • Lifetime estimate L80 at Ta < 40 °C: > 60,000 h • AQUALUC material test results Available in custom lengths and double-sided...

... permanently weather-resistant. Mechanically protected by a solid housing, the connection is secured by a robust threaded closure. Number of poles: 5+PE / 6-pole / 14-pole Rated voltage (IEC 60038): 5+PE: 115 V / 6-pole: 42 V / 14-pole: 20 V Rated current: 16 A Insulation resistance: > 5,000 MΩ at 500 V Protection class (EN 60529): IP67 unmated / IP69K mated Mechanical lifespan: > 2,000 mating cycles Temperature range: -25° C ... +60° C...

... easy and seamless connection. High current transmission values of up to 16A continuous load at a voltage of 630V AC/DC open up a wide range of applications. In combination with our X-TEC 15 connector, we have created the M15 Power, an ideal plug-cable combination that impresses not only with its performance but also with its extensive range of applications.

..." measurement mode, the applied pressure is measured against an enclosed vacuum; this measurement mode is available from the measurement range of 0 ... 250 mbar. The electrical connection is made via an M12 x 1 connector. Measurement ranges: 0 ... 200 bar Measurement type: Pressure measurement against atmosphere Output signal: 0 … 10 V / 4 … 20 mA Operating temperature range: -20 ... +80 °C Burst pressure/protection: min. 200 % Dead volume: 0.757 cm³ / 0.5 cm³...

... potentiometer 10 kΩ; voltage signal 0 – 10 V; current signal 0 – 20 mA or 4 – 20 mA Status LED: green; fault: red Output "Fault Out": connected to GND; as input: low 0...0.5 V / high 4 V...UB Protection class: IP 20 Operating temperature range: 0 … +50 °C (+32 … +122 °F) Dimensions (L x W x H): approx. 100 x 92 x 35 mm Weight: approx. 125 g Remarks: Subject to technical changes.

...Very robust cable pull sensor in a compact design, suitable for a variety of applications such as crane construction, stage construction, warehouse technology, etc., with a measuring length of up to 3000mm. Simple, universally adjustable mounting. Compact and sturdy construction. Variable mounting options. Measuring length up to 3000 mm. Potentiometer, voltage, or current output. Housing made of zinc die-cast and plastic. Lockable ventilation openings to prevent condensation. High sealing at the cable exit. M12 connector.

... Identification gauge:85, referenced to supply common Pirani-only mode:0 (low) Combined Pirani / cold cathode mode:15 … 30 (high) LED:high voltage on Electrical connection:FCC 68 appliance connector, 8 poles, female Sensor cable:8 poles plus shielding Cable length:≤50 (8 x 0.14 mm 2) Operating voltage:≤3.3 Operating current:≤500 Materials exposed to vacuum:stainless steel, Al 2O 3, FPM75, Mo, Ni, Au, W Internal volume:≈20 DN 25 ISO-KF:≈700 DN 40 ISO-KF:≈720 DN 40 CF-F:≈980 Protection category:IP 40 CE conformity:EN 61000-6-2, EN 61000-6-3, EN 61010-1...

...For the transmission of higher currents or for more demanding applications, druseidt offers various options for current transmission using connectors. High-current connectors are electrical connections that must not be plugged or disconnected under load when used as intended. All plugging operations must be performed without load. Within these connectors, current transmission occurs via a...

...Contacts with lamella technology. - Current carrying capacity up to 2,400 Amperes - > 10,000 mating cycles - High vibration resistance - Low contact resistance - Automated lamella assembly - High contact reliability - Temperature resistance of ODU LAMTAC® up to 150°C - Including cable assembly...

...high contact density, space-saving, crimp connection Connection technology: Crimp Rated current: 10 A Rated voltage: 250 V Rated surge voltage: 2.5 kV Degree of pollution: 2 (3 in enclosures with IP54 and higher)...

...For connectors and low-current contacts, gold/cobalt coatings are primarily used over nickel or chemical nickel layers. In certain applications, the use of gold/nickel layers can be beneficial. For economic and functional reasons, it may also be advantageous to use palladium or palladium alloys. All of these systems meet high standards for hardness, wear resistance, contact resistance, and corrosion resistance. We are happy to advise you and find your individual solution.

...Silicone Reducer Connector High-Quality Silicone Hose Connectors With the reducer connectors from Technikplaza, two hoses can be easily connected. The liquid is gradually transported through them. This is particularly useful if you want to extend your current hose. Technical Information: - Wall thickness: 4.5 mm - with polyester inserts - Maximum working pressure: 5.8 kg/cm² - Burst pressure...

...Electrical supply connector, 4-pole power connector, for very compact connection - - Operating voltage: 630 V AC/DC- Up to 12 A per pin - Operating current per contact max. 12 A - 4-pole - S-coded - Temperatur (fixed line): -25 bis +80°C - Temperatur (moving line): -20 bis +80°C - Material: PUR - Very compact connection for cables with wires up to 2.5 mm² - Reverse polarity protected...

...The secure connection for your wire-to-board or wire-to-wire solution: Our crimp, IDC, or foil connectors ensure high flexibility in positioning on the circuit boards. Connections over long distances, taking into account your technical requirements such as current flow, data flow, etc., are also easily achievable.

...Min-Max display function to store and display the highest or lowest measurement value Option: Left-turning motor Operating voltage: 18...36 VDC Input signals: Current, voltage, frequency, Pt100, etc. Operating temperature: -25 ... +70 °C Connection: 8-pin connector Mounting: Mounting screws (panel installation) Protection class: Front: IP66, IP67, and IP68 (1 m, 24 h) Certifications: ABS, BV, DNV-GL, LR, MED...

... analog output. The current output is read back by the F01 to ensure the output signal is emitted correctly. To be able to use the F01 in many applications, users can select different pressure connections. The electrical contact takes place via a 5-pole M12 connector. Through the calibration of the transmitter via temperature, a total accuracy of 1 % FS can be achieved within a range of 0...80 °C...

...The TDD type temperature switches are used for cost-effective measurement and monitoring of temperature. They are applied wherever temperature needs to be monitored with high accuracy. A semiconductor is used as the sensing element, which provides a digital signal to the evaluation electronics in 0.5°C increments. The current measurement value is displayed on a 3-digit LED. Two switching points...

...Universal input 100 to 240 V AC, constant voltage, current limited, low standby power, High efficiency, continuously short circuit proof, Leakage current ≤ 100 μA, small package, without active fan. Additional information •Protection Class: I •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined...

... excessive switching stress, e.g., incandescent lamp load, motor start, etc.) - Switching status indication via LED - Overload protection with self-resetting electronic fuse - High protection class up to IP67 and IP6K9K - Wide selection of electrical connector variants for quick assembly and secure connection...

... length or mains cable Optional, on request: Output power: 20Watts and more Optional, on request: Combined variant with connector and cable Optional, on request: Customized output voltages Optional, on request: Current regulated version for LED application...

...Power Entry Modules with High-Performance Filters • Power entry modules with / without filter • Power entry modules with high-performance filter • PCB filters • IEC connectors with filter • IEC connectors with filter and fuse • Three-phase filters • In-line filters • In-line filters with / without IEC connector • Power output filters • Power filters for two-phase systems • High current filters • Accessories...

...Test adapters for in-circuit and functional testing, standard solutions and custom solutions; operated pneumatically, electrically, or manually. Test adapters for in-circuit, EOL, and functional testing, standard solutions and custom solutions; operated pneumatically, electrically, or manually. Available as dual stage and tandem test adapters. Contacting test points via spring-loaded contact pins. Connection to connectors through connector engagement mechanisms. High current and high frequency contacts. VPC and Pylon interfaces for quick swapping of adapters and adapter kits.

... 1999, we have also been active in the automotive industry. In 2014, the current managing director Jörg Gräber took over the management as CREATEC GmbH & Co.KG. We have specialized in compressed air and cooling water supply in plants and machines. Our products meet the high requirements of the automotive and railway industries. We are a strong partner in the automotive and mechanical engineering...