Results for

Heat+cool - Germany

38 Companies

118 Products

Product recommendations

Turkey

Austria

United Kingdom

Switzerland

See more products

STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
UNIVERSAL HYDRAULIK GMBH

Germany

Innovative systems determine the market of tomorrow. This is the principle which Universal Hydraulik has been following for more than 35 years when designing hydraulic systems, cooling systems, and heat exchangers, which are used all over the world in every field of application. Our heat exchangers are available as standard products, or can be specially customised to meet the requirements of your application. We use highly-precise software for our calculations, with drawings available in 3D. Our heat exchangers are tested up to five times during production. The cooling performance can be verified on our test rig. By purchasing one of our hydraulic and cooling systems, you'll be provided with a turnkey system from a single source. We design, manufacture, install and commission the complete system. All our systems are fully tested with regard to functionality and workmanship prior to delivery and are supplied with extensive documentation.

Website
HANS BERG GMBH & CO. KG

Germany

Perfection to detail is the key to a precise whole. That principle has consistently remained the company philosophy ever since it was first founded in 1950. Hans Berg GmbH & Co. KG is an internationally operating manufacturer of deep-drawn and metal tube components for a vast variety of industries. The Group has sites in Germany in Reichshof (headquarters) and Florstadt, and in Turkey in Dilovasi/Istanbul, employing a staff of roughly 600 people and specialising in cold-forming, joining, threading and cutting tool technology. Berg is the technological and market leader in the field of fittings and connections for radiators and convectors. Other important business sectors include heating, cooling and the automotive industry. As a development partner, Berg develops and manufactures high-precision and safety components for large and specialised suppliers in the automotive industry, for example applied within the fields of vibration damping and airbag gas generators.

Website
BOURDON HAENNI GMBH

Germany

Bourdon is now one of the world's leading brands for mechanical process instrumentation and, with its international sites, is part of the Baumer Group. It was created in 2005 through the acquisition of the service portfolios and expertise of the formerly well-known brands Bourdon-Sedeme and Haenni. This expertise and passion is based on the Bourdon-tube gauge invented by Eugène Bourdon, which is a key component for precise mechanical pressure measurement technology. The extensive product range is manufactured with high vertical integration and state-of-the-art process methods at the company's own production sites in France, Germany and India. In addition to the standard products, such as thermometers, pressure gauges, pressure and temperature switches, this also includes a variety of customer-specific solutions which are mainly used in the sectors of oil and gas, energy/power stations, water supply, chemicals, and heating, ventilation and cooling.

Website See all products
HEBOLD SYSTEMS GMBH

Germany

Hebold Systems has been supplying and developing custom solutions in vacuum, mixing and homogenising technology for the pharmaceutical, cosmetics and food industries for many years. It produces mixers as homogenisation or dispersion systems for the manufacture of creams, gels, ointments, lotions and shampoos. The process systems for manufacturing semi-solid forms can be supplied in standard sizes of 5 to 10, 000 l. Depending on the customer specifications, complete systems consist of one or more HEBOLD mixers with or without lid lifting equipment, homogenisers, preparation phase vessels, vacuum systems, heating and cooling equipment, pipework, catwalks and control systems with process visualisation and recipe management.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ROTOTEAM GMBH

Germany

Since 2005, we have been helping our customers significantly reduce their energy costs for cooling, heating and drying. Our services are specially designed for the maintenance, repair and reconditioning of heat recovery systems, such as rotary heat exchangers (RHE), plate heat exchangers (PHE), heat recovery loops (HRL) and industrial adsorption air dryers and HVAC systems. We focus on the reconditioning and optimisation of existing, outdated systems. We improve your heat recovery performance or retrofit your system to offer you an economical solution which reduces CO2 emissions. The benefits for you: This process saves you money! Thanks to modern measurement technology, we can determine the efficiency of your systems on a regular basis, and optimise them as needed – so your appliances are always as efficient as possible. ROTOTEAM is a reliable supplier of spare parts for your heat recovery, ventilation and drying systems, and can offer a guarantee of up to five years. To ensure the quality of your HVAC system is maintained, you should have annual hygiene cleaning and maintenance carried out on your ventilation system. Our staff are trained to the VDI 6022 standard for air conditioning systems and air quality, perform maintenance to the VDMA 24186 standard, and will be happy to advise you on site. Our experienced employees check your systems for damage and corrosion, and check the condition of the filters.

Website
TECHNICAL TEXTILE MONTEX GMBH

Germany

ABOUT US – Montex Glass Fibre Industries Pvt. Ltd./TTM Germany is one of the biggest companies in the fibreglass industry and has developed into a conglomerate. We have managed to establish ourselves as one of the leading glass-fibre fabric manufacturers globally. Our roots are in Mumbai and Nashik, and we supply a wide range of (international) customers from Asia, Europe, the USA, the Middle East, Africa and Australia. Our company has established itself as the best solution provider for the most varied insulation requirements in sectors like heating, ventilation and cooling, electronic equipment, automotive, electrics and the building trade. On the basis of our strong R&D culture, we always strive for our Production and Service departments to manufacture and develop precisely the quality products that our customers need. And we do so at affordable prices. We are continuing to expand into untapped markets and are looking for continuous improvement processes. OBJECTIVE – To become the first point of contact for glass-fibre fabrics in the industry, and to do so through continuous improvement, driven by the integrity, teamwork and creativity of our employees. We want first-class products for satisfied customers.

Website
WENZ KUNSTSTOFF GMBH & CO. KG

Germany

WENZ Kunststoff GmbH & Co.KG has worked in the field of plastics technology since 1997. As a specialist in heating and cooling technology, materials drying, separating, de-dusting and material conveyance, we offer our customers personal advice on all plastics processing matters. Having taken over representation of the Regloplas temperature control devices forms the basis of our future development. Our desire for innovation leads to the development of new technologies such as the qip® dryer and the Cycletemp® Vario, Impuls and Flow as special temperature control alternatives. With regard to centralised materials supply, we have developed an idea with the coded coupling station, which has become our eighth patent. We currently have the best technologies on the market. Project planning, project development and the construction of conveyor and drying systems for plastics. We not only have a strong relation to the mid-sized sector, we have the flexibility to service companies of every size. With sustainability in mind, we also upgrade old materials handling systems to a new technological level – without any new construction and independent of both age and manufacturer. Our customers enjoy a massive advantage in terms of efficiency, energy, the environment, system integration and costs. Our offer is rounded off with the accessories of our own Talkob and Mouldpro brands – temperature control couplings and hoses, cleaning granulates, flow meters and much more.

Website
GESMEX EXCHANGERS GMBH

Germany

GESMEX Exchangers GmbH has been manufacturing fully welded plate heat exchangers in a plate and shell design for over 15 years. Our unique selling point is the unique laser weld seam, which results in a large connection cross-section and a small heat-affected zone. The plate package is therefore ideally equipped for withstanding adverse conditions like large temperature gradients and pressure fluctuations. Development, production and sales take place at the Schwerin site. Plate heat exchangers from GESMEX Exchangers are used all over the world. Many different designs are possible. Our equipment can be used as evaporators, condensers, heat exchangers, recuperators, absorbers and other customer-specific solutions. Our range of standard solutions covers various applications, including as evaporators in cooling technology/heat pumps, steam generators in district heating systems, KOH coolers for hydrogen electrolysis, standard heaters and coolers for liquids – and much more.

Website
SEIFERT ELECTRONIC GMBH

Germany

Seifert electronic manufactures customised heat sinks to reliably dissipate heat from electrical components. As a high-performance partner to a wide range of industries, we now offer a variety of profiles, ranging from standard heat sinks to individually machined special profiles. Seifert electronic has made a name for itself over the years with heat sinks made of extruded aluminium profiles. Our team of more than 50 employees keeps a cool head when faced with any challenge and ensures that our customers' electronics do not overheat. In addition to a large catalogue ranging from small PC board heat sinks to high-performance heat sinks and finned profile heat sinks for forced cooling, we produce our heat sinks in almost all desired dimensions and precisely tailored for a wide variety of applications. Our cooling systems are always individual, dependable and economical. If you can't find what you are looking for in our range, we are happy to work together with you to develop a custom-made solution that is precisely tailored to your cooling application. Our free profiles and technical support help to achieve the maximum possible heat dissipation.

Website See all products

AZ INTEC GMBH

Germany

AZ INTEC GmbH – your certified partner since 1979. We are a family business focused on production, development and OEM. We offer a full range of products and solutions for a multitude of applications. You can get all the parts individually or in customized plug & play assemblies which are ready for your production line. Products: • Shut-off and control valves• Fittings and valves• Pre-assembled hoses made of elastomer (rubber and plastic)• Stainless steel corrugated pipes and hoses• Pre-insulated solar hoses• CATS® – assembly system• Other assembly systems. Media: • Fuel gas• Technical gases• Oxygen• Drinking water. You can find our products and assemblies in use in: • Heat exchangers• Medical applications• Respiratory protection• Renewable energy• Solar panels• Heating and cooling applications• HVAC• District heating• Automotive industry• Building services engineering• Chemical industry• Trace heating• Security technology• Domestic installations (water and gas) – CATS® self-assembly system

Website See all products
KAMPMANN GMBH & CO. KG

Germany

The best ‚Made in Germany’ climate. Whether as a stand-alone product or as a total solution: a Kampmann Group building climate is always synonymous with top quality. Kampmann GmbH is a family-owned company with headquarter in Lingen, Germany. This is where the majority of our production and administration is based. Almost all the product groups are designed, produced and assembled here. It is also home to the „Kampus“ Training Centre, the Customer Service Centre and the Research & Development Centre (FEC). We produce end products for the regional market and pre-assemble units in the Polish town of Lęczyca. Kampmann is a specialist and leading manufacturer of decentralised systems for heating, ventilation and cooling. Lingen is also home to emco Klima GmbH. The company was taken over in 2019 by the emco Group. emco Klima has been synonymous with ventilation expertise since 1972. All kinds of diffusers and decentralised ventilation units are produced in Lingen. emco Klima also has its own research and development centre. The headquarter of NOVA Apparate GmbH is in Donaueschingen (GER). NOVA specialises in freely configured, centralised air handling units and, as such, is well-known Europewide for its quality, precision and reliability. NOVA employs almost 150 people and offers “plug-in” solutions with integrated measuring, control and regulation technology, as well as refrigeration technology.

All the products for "heat+cool"

Trench convector Katherm HK

Unit Heaters TIP

Unit Heaters TOP

Unit Heaters Top C

Unit Heaters Ultra

See all products

Product recommendations

Vibrating Fluid bed system & Heat exchange equipment

Germany

Switzerland

Turkey

Netherlands

See more products

SANHA GMBH & CO. KG

Germany

The SANHA group is one of the leading European manufacturers of pipe systems for drinking water, gas, solar, heating, cooling and sanitary applications for use in domestic and industrial settings. We have approximately 8500 items in our product ranges, covering most commonly used materials such as Copper, Copper Alloys, Stainless and Carbon steel, as well as our innovative Silicon Bronze, lead free fittings, for use in Drinking Water applications. As a family owned and operated business, SANHA has over 50 years of experience, employs over 650 staff and turns over app. 100 million Euro. SANHA’s principal focus is on system technology. We believe in supporting local markets with relevant certification. As an innovator in press technology, we have invested significantly in developing lead-free Silicon Bronze products, for safe drinking water applications. Our manufacturing plants specialise in tube and fitting production, with our Stainless Tube plant in Berlin and Stainless Steel fitting plant near Dresden, along with our Head office and central distribution depot in Essen, we are able to serve our customers well throughout Europe. With over seventy percent of our products being manufactured internally, we have a strong control over quality and our supply chain, ensuring the end product meets the stringent requirements of our customers.

All the products for "heat+cool"

SANHA®-Heat Connection set, vertical, for heat meter

SANHA®-Heat

SANHA®-Heat

SANHA heating circuit distributors, stainless steel

SANHA®-Heat

See all products
KRANTZ GMBH

Germany

Founded in 1882 by the engineer Hermann Krantz, who gave his name to the company, Krantz GmbH now develops, designs, manufactures and distributes air supply, heating and cooling systems. In addition, the company produces filter and barrier systems, is an expert in industrial waste air cleaning and has also made a name for itself in the area of ventilation systems for power plants, nuclear facilities and industrial facilities, with services including planning, construction, maintenance and testing. Our in-house Research & Development Center uses its laboratory testing hall covering 1000 m2 with cutting-edge technology to research and develop solutions covering all aspects of the topic of air. Our in-house manufacturing facilities in Aachen and Mallersdorf (Bavaria) produce tailor-made ventilation components. Our products enjoy an excellent reputation across the world. We can be found wherever energy efficiency, quality and reliability are important.
ELMEKO GMBH + CO. KG

Germany

Development: We develop and manufacture high quality control cabinet components necessary for the safe and practical functioning of a controller or control system. This includes equipment as well as climate control such as e.g. cooling, heating, dehumidifying, airing as well as complete control cabinets, wall housing and, not least, diverse accessories such as e.g. circuit diagram bags. Production runs: The production that takes place in Liebenscheid is a core part of our company and maintains our consistent high quality. We achieve this with the help of our qualified employees and by using high quality parts from notable manufacturers. This guarantees you working technology and us happy customers. Short lead times and sensible storage contribute to securing fast and reliable delivery. Services include: Short decision making paths take care of speed and flexibility. We champion your concerns in partnership with you.
LENSER PRÄZISIONSTECHNIK GMBH & CO. KG

Germany

We have specialised in the production of heating and cooling plates for hydraulic presses for decades. Our experience in this area has made us the leading manufacturer-independent supplier on the European market. Our deep-drilled heating plates are used in the wood-processing industry to manufacture chipboard and fibreboard, as well as for surface coating doors, furniture and wooden materials. In the laminating and multi-layer sector, these plates are used in card presses and in the production of printed circuit boards. The rubber industry uses our heating plates to heat vulcanisation moulds and to produce conveyor and transport belts. In solar technology, our high-precision heating and cooling plates are used in laminators to produce solar cell modules. Our plates are designed and manufactured on customer request and specific to the relevant product.
WALTCHER GMBH

Germany

We are producing different types of machinery: - for forming different masses - cereal, granola, seeds, muesli, crispy rices, paste-based, marzipan, honey-based, chewing gum extruders. - for chocolate masses - heating, tempering, moulding, enrobing, cooling, one-shot depositors, mulds. - for jelly - cooking, moulding, cooling, moulds. Also we can produce mixers, ultrsonic cutters, ransporting systems... Moreover we are buying and selling used confectionery, pastry and wrapping machines - for most of sweet products - chocolate, hard candy, soft candy, toffee, wafers, cookies.
SIELMANN TANK

Germany

We are specialists for factory new & used containers and silos. Known for decades in industry, trade, the food sector, the chemical industry and the skilled trades for first-class containers. Tank repair on request. The purchase of used containers and tanks is a matter of course. Large warehouses with many different containers in various designs for many applications, such as liquids, food, pastes, manufacturing, heating and cooling requirements and much more. Deliveries are ex works. Individual support and transportation. Sielmann provides you with containers ex works from various warehouses in Germany. Details on loading and unloading, setting up, parking, transport by truck, ship or others and transfer of risk are determined individually.
LOGSTOR DEUTSCHLAND GMBH

Germany

LOGSTOR is the world leader in pre-insulated pipe systems for District Heating and District Cooling energy infrastructure. LOGSTOR pre-insulated pipe systems enable you to optimize every single aspect of the design, implementation and maintenance of your infrastructure for moving liquids from A to B by pipe.
WIRA ANLAGENBAU GMBH

Germany

WIRA Anlagenbau GmbH is a service provider for industry and specialises in the engineering and plant manufacturing of bulk material conveying systems. For the benefit of our customers, we effectively combine engineering expertise, professionalism, precision, pioneering spirit and over 50 years of experience. Together with our customers, we plan, develop and implement successful system solutions of all kinds for various application areas. Bulk material systems and pneumatic conveyor systems are used for sand, dusts, glass, paints and other substances and raw materials in numerous sectors. Our systems and solutions are used in foundries, the building materials industry, the building industry, the foodstuff industry and in may other areas. We set ourselves very high standards in performance in order to offer optimum solutions for conveying various bulk materials. Are you also interested in bulk material conveying systems? Do you have any questions for us or would you like a customised quotation? Then please get in touch. We would be happy to answer any questions you may have and are also ready to take on difficult challenges.

Website

APROVIS

Germany

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

All the products for "heat+cool"

Process gas heat exchanger

FriCon - gas treatment

Website See all products
AVITEQ VIBRATIONSTECHNIK GMBH

Germany

Since 1939, AViTEQ has provided top-quality reliable solutions for vibration conveyor and process technology for a wide range of industry sectors and has always been ready to help via its global service.

All the products for "heat+cool"

Vibrating Fluid bed system & Heat exchange equipment

Thermal spiral conveyor - Cooling, heating, drying

Website See all products
ECOCHI GMBH

Germany

Ecochi GmbH provides high-quality, superior heat pumps throughout Europe. Our aim, working together with our customers, is to make a positive impact on the environment and to create a sustainable future. It is our vision to be the European leader in distributing heat pumps and to integrate eco-friendly elements into contemporary lifestyles. We endeavour to have heat pumps recognised as an efficient and environmentally-friendly alternative to traditional heating systems. We are striving to create a sustainable future by offering products that use renewable energy and minimise CO2 emissions. In addition, our heat pumps stand out thanks to their very high level of energy efficiency. By making use of ambient heat, our customers can reduce their heating costs considerable, while also reducing their energy consumption. Customer satisfaction is our top priority. Our dedicated team of experienced specialists are ready to help with solutions tailor-made to your technical requirements, whether in relation with our products or as an independent service provider in the international context. Let's make a green future together!
TECHNOTRANS SOLUTIONS GMBH

Germany

The fact that the gwk Gesellschaft Wärme Kältetechnik mbH company enjoys such a great reputation as a top expert and innovative specialist in high-quality temperature control and cooling technology is based on an abundance of experience that stretches back more than five decades. Anyone in need of well-thought-out high-tech products ranging from cooling plants via temperature control systems to water treatment solutions will find gwk to be a system provider that manages the entire thermal process, generating individually tailored designs and also delivering engineering and all the necessary components. Also in the area of close-to-cavity temperature control for mould inserts and mould cleaning, gwk offers its customers intensive and individual support. At present over 400 employees are engaged in producing complete process solutions for customers from the plastics, metal processing, food and chemicals industry on every continent. The technotrans group of companies focuses successfully on applications involving liquid technology as its core competence. With 21 sites and about 1, 250 employees, it has a presence in all major markets worldwide. For many years, technotrans has opened up new areas of application based on its core competences of cooling, temperature control, filtration as well as measuring and dosing technology. The strategy aims at a sustainable, result-oriented development.

All the products for "heat+cool"

Temperature Control System - integrat vario gt

Cooling Plants - Heat recovery

Cooling systems - gvk/ghkv

Centralized cooling plant

Cooling Plant

Website See all products
MIXACO MASCHINENBAU

Germany

MIXACO mixers: made in Germany No other company stands more for innovation in mixing technology than MIXACO. Our machines and solutions have been setting new standards for decades. Around the world, major companies in many industries put their trust in MIXACO products. And not without reason. Long Experience: Knowledge and expertise from more than 50 years in the engineering business means our know-how is second to none. We’ve done more than just follow the continuous development of process engineering—we’ve helped to shape it. To this day, many of our patented solutions are still making processes easier for our customers and ensuring greater efficiency in industrial workflows. Profound Know-how: We know our customers’ specific processes and requirements like the back of our hand. Feeding this knowledge back into the continuous development of our products enables us to be innovative time and time again. At the same time, we deliver customized individual solutions for optimum mixing results by running joint tests and collaborating on process optimization measures. One-Stop Shopping: MIXACO’s holistic approach gives our customers a competitive advantage, too. A thorough analysis of their processes and the development of optimum mixing solutions and new procedures enable us to implement their requirements faster and more reliably. We also provide support in the form of training courses, on-the-spot services and maintenance.

All the products for "heat+cool"

MIXACO Heating/Cooling Mixer

See all products
OGE GROUP

Germany

OGE Group is a sales organisation of a group of private companies from various industrial sectors. Our strategic supplier network meets all the demands of global value creation with a competitive mix of cost-effective production sites, specialised niche manufacturers and quality leadership of industrial goods and services. Above all, our service is provided from a single source, with quick response times and delivery reliability. You can see our entire product range here, please do not hesitate to contact us.

All the products for "heat+cool"

Finned or Bare Tube Coils for Air

Air Cooled Heat Exchanger

Oil Cooling

Oil Cooling

See all products
LIQUOSYSTEMS GMBH

Germany

You have a wine cellar, are a wine producer, orchardist or beer brewer, or even a wine cooperative, and are looking for an innovative supplier of tank cooling and fermentation control equipment? Then LiquoSystems is the ideal place for you. We offer the right cellar technology for perfect tank cooling, including fermentation control and temperature regulation. The quality of wines, beers and other fermented products is determined mostly by maintaining the correct temperature during fermentation and storage. With products from LiquoSystems, you leave nothing to chance. With us, you can receive complete operational systems, with planning, design and installation carried out at your site. Alternatively, you can conveniently research all products relating to cellar cooling in our online shop, make enquiries without obligation, and have items delivered conveniently to your door. This way, our products can be directly purchased in the shop and installed yourself, if you have the relevant expertise.

All the products for "heat+cool"

Tube Bundle Cooler

Cool Plate

Motorised Ball Valve | Auto-Reset

Nano Solo

AquaZero 15,0 KW

See all products
GEOCLIMADESIGN AG

Germany

The company GEOCLIMADESIGN AG, is a Manufacturer/ Producer, which operates in the Heat pumps, industrial industry. It also operates in the industrial refrigeration, low temperature heating, and batteries for heating and cooling industries. It is based in Fürstenwalde, Germany.
HAAG + ZEISSLER MASCHINENELEMENTE GMBH

Germany

HAAG + ZEISSLER is a high-tech firm with more than 40 years’ experience. Over the years, we have developed into one of the leading manufacturers of rotating assemblies and piping joints – always focussing on the global market. Thanks to our outstanding technical expertise, high product quality (Made in Germany) and solid experience, we distribute solutions tailored to the challenges faced by our customers. Our goals: 100% customer satisfaction, 0% error rate and the best possible service. We design, develop and produce rotating assemblies and piping joints for the mechanical, chemical, electrical, pharmaceutical and steel industries, to name only a few examples of the fields of application. Our products are suitable for both warm and cold water, steam, heat transfer oil, hydraulic oil, compressed air, different gases, cooling lubricant, vacuum and many other media.

All the products for "heat+cool"

Series Mrf 9-11 Passages

Website See all products
THÜMAG

Germany

We are THÜMAG, a company based in Thuringia, Germany and which specialises in the construction of machinery, systems and devices. Since 2000, we have been manufacturing refrigeration units and heat exchangers for controlling the temperature of machining processes in machine tools and compact heat pumps for detached houses and apartment buildings. When designing our refrigeration units, we attach great importance to a durable and easy-to-service design. Our precision cooling units are distinguished by high-precision temperature control, minimising temperature faults in the process of machining precision workpieces and improving the quality of the dimensional and surface accuracy. Our refrigeration units are available in different variants, including air- or water-cooled coolers with an active refrigeration cycle, and as controlled heat exchangers. Equally, we offer our customers customised solutions for process cooling.

Website