plastic ball Germany

...Material: Thermoplastic, black. Sleeve steel. Execution: Steel galvanized. On request: Other colors. Form C: Plastic thread Form E: Threaded sleeve Form M: Tapered hole...

...Ball valves, flaps, valves, and filters from the brand Praher Plastics...

...No-crush roll made of polyurethane with hard core as well as ball bearing. This ensures enormous flexibility - an ideal application in the paper industry. Furthermore, different diameters as well as profiles are possible. The recovery properties of the no-crush roll are determined by the profile and the hardness.

... feed rates with low noise levels. Even delicate tasks, such as creating the thinnest webs and ribs, can be accomplished with minimal milling pressure. The tools are dynamically balanced in two planes, ensuring high operational smoothness and low vibration, which is reflected in perfectly clean surfaces. Additionally, the milling heads are interchangeable, providing high flexibility and quick replacement in case of wear. The interchangeable heads are available in ball, straight, radius, or 45-degree configurations.

...Roll 60 x 27 with lid Roll 60 x 27 with bearing 6302 and one-sided protective cover for ball bearings Bearing: 6302 - 2RS D Roll: 60 d Bearing: 15 B Roll: 27.0 b Bearing: 13...

... on the belt edges thanks to secure attachment of the coupling rods Accessories: - Gears in various sizes with round or square shaft fittings - Profiles in various heights and designs for incline conveying - Side plates in various heights for guiding bulk materials - Side module with ball bearing to minimize friction at the belt edge...

...Plastic rim with a non-marking tire made of thermoplastic rubber with sliding bearing (/1), groove ball bearing (/5), or stainless steel groove ball bearing (/5R). Apparatus wheels and apparatus rollers We offer a comprehensive range of apparatus wheels and apparatus rollers for internal transport. To ensure a long lifespan for the wheels and rollers, we use high-quality materials and components. Various mounting options allow for flexible installation.

... bearings are manufactured exclusively through subtractive processes. In contrast to the mass production of injection-molded plastic bearings, this manufacturing method guarantees high quality, dimensional accuracy, and long durability. The following materials are typically used for the production of plastic ball bearings: Outer and inner rings: POM • PE • PPH • PETP • PTFE • PA • PEEK • PVDF • PSU Balls: Soda-lime glass • Duranglass • Stainless steel 1.4401 • Stainless steel 1.4571 • POM • PP • PVC • PEEK • Ceramic • PVDF Ball bearings made entirely of PEEK are also available.

...With the CK600, there are no limits. The press handles paper and film just as well as PET, hard plastic, and even aluminum cans.

...Function and aesthetics are cleverly combined. The days of the spring roller blind are over, and nowadays, a roller blind doesn’t have to be just a single color. The side-operated roller blind can be controlled with a ball chain. Center-operated roller blinds stop gently in the desired position and can cover only parts of a window. Whether with a cover panel in front of the mechanism or a pendulum safety feature to prevent the blind from banging against the window when it’s open, whether as a cassette blind or a complete cassette system for total blackout: roller blinds are versatile!

...Features — 4-pole rotor with plastic-bonded NeFeB magnet — 3-strand winding, connected in a triangle — 3 internal Hall sensors for rotor position detection, 120° offset — Housing made of aluminum — Bearing plates as precision aluminum turned parts — Double-sided ball bearing AC/DC: 3-phase Type: brushless Voltage: 12V Additional features: 4-pole, precision...

...KUGELFISCHER® - Balls for industry, rolling bearings, linear technology, or measurement technology. Available in defined accuracy classes (Grades) and materials, such as chrome steel, stainless steel, carbide, plastic, or ceramic.

STÜBBE is an internationally operating manufacturer of pumps, valves, as well as measurement and control technology for the chemical industry. We tackle challenges where solutions are needed. We think ahead where others stop. We are resilient when it matters. That is STÜBBE. As an internationally operating manufacturer of pumps, valves, and measurement and control technology made from plastics, w...

...Radial ball bearings primarily serve the purpose of accommodating radial loads, meaning forces acting perpendicular to the shaft. They are available in all standardized sizes and designs. The family of radial ball bearings includes, for example, angular contact bearings, deep groove bearings, and spherical bearings, to name just a few. These ball bearings come in open designs or closed, with plastic (2RS) or steel sheet (2Z) seals.

... the ball transfer units are offset from the vertical with overhead mounting, it is possible to achieve a reduction in the load-carrying capacity of up to 50%. Many of our ball transfer units are low-maintenance and feature an oil-soaked felt seal against contamination. Ball transfer units with plastic load balls are excellent for moving loads with delicate surfaces (such as glass, polished...

...Position indicator, 1:1 rotation, mechanical. Especially suitable for ball valves (1/4 u) and rotary disc clamps (1/2 u)...

...The practical, elegant display sphere for your fitting stockings. A great idea if you want to do without a dispenser box. Transparent, made of impact-resistant plastic. Item No. / Product No.: 563 Recommended for high-end shoe stores. For questions or to place an order, simply call us at +49 (0)41 81-92 30 0.

...Ball Shut-off Valves Series BVE Features: • BVS version with Schrader valve • Hermetic design • Threaded connections for easy mounting • Max. operating pressure 45 bar • Suitable for high-pressure refrigerants R 410A and CO2 (subcritical) • PTFE valve seat seals • Usable in both flow directions (Biflow) • Spindle cover secured against loss with plastic band • UL certified • CE marked (according...

...Transport roller 600x400 made of high-quality red PP plastic (Material: Polypropylene grade 1 - no regrind), open corners for easy cleaning, equipped with 4 swivel casters (housing made of reinforced black solid plastic (Material: Polyamide - no regrind) with centrally injected ball bearing for optimal turning properties in the swivel ring - splash water protected, wheel diameter 100 mm...

... coating. - Inside, Delrin plastic balls run on two molded raceways with an extremely large diameter; this distributes the load over a greater number of balls than is the case with conventional blocks. - The roller diameter is 59 mm. - They are suitable for ropes up to 10 mm. - The swivel can be locked in two positions. - Side openings allow for effective flushing of contaminants and salt residues. - All blocks can be disassembled for maintenance purposes and for the replacement of the balls. Breaking load of single block: 1355 kp !!!

...Ikos Rockabrunder 60cm or 90cm high. The delivery includes a 3-part pole with centimeter markings, a base, a ball hose set, and a chalk container. The 3-part pole consists of an aluminum tube with connectors at the ends. To ensure the necessary stability, the plastic base is filled with metal particles.

...We offer plastic valves for industrial applications. Our range of plastic valves for industrial applications includes: - Ball valves (automatic, manual, pneumatic) - Diaphragm valves (automatic, manual, pneumatic) - Shut-off valves - Flow meters - Pressure relief valves - Solenoid valves - Electric feedback devices - Accessories and spare parts for plastic valves Made from materials: PP-H, PVC-U, PVC-C, ABS, PVDF Contact us with any questions regarding valves; we are happy to assist you and look forward to your inquiry!

... combination of the inductively hardened round guide with various guiding elements such as linear ball bearings, plastic or ceramic sliding bearings, and rollers continues to make the round guide an interesting construction element.

...Fork and mounting plate made of galvanized steel sheet after shaping, wheels made of high-quality plastic. The riveted wheel axle is made of galvanized steel. The fork head contains the ball bearing. Apparatus wheels with a soft tread are particularly suitable for sensitive floor coverings such as parquet, laminate, or tiles. We are happy to accommodate your individual requests.

... request, e.g., in 90° (see WAD ...). • S12.65x1.5 is a metric saw thread with self-locking properties. • Valve body of the series end without ball, i.e., no check valve. PDF link: https://www.vandenheuvel.de/assets/files/Kataloge%20pdf/kat-mt-vdh-deu-2019-003.pdf...

... requirements, we supply premium brands such as SKF, FAG, and INA. For secondary applications, we also provide cost-effective rolling bearings. Our product range includes: • Deep groove ball bearings • Angular contact ball bearings • Four-point bearings • Thrust ball bearings • Spindle bearings • Spherical ball bearings • Axial deep groove ball bearings • Tapered roller bearings...

...Windows for heritage protection with rain protection rails including cladding strips ◾Insert windows for post-and-beam constructions made of aluminum (e.g., Schüco FW50, etc.) ◾Lift-slide and lift-slide-tilt doors Wood-aluminum windows for commercial applications with standard or special profiles Plastic windows in 2 profile depths and in all common color tones ◾70 mm (5-chamber profiles) ◾84 mm (5 or 7-chamber profiles) ◾(e.g., Rehau, Veka)...

...With a variety of storage options, this locker cabinet is a must-have in any workshop. Made from quality steel sheet Welded construction with reinforced doors 3-point security lock with cylinder lock and 2 keys On the right side, there is a valuables compartment with a security lock 16 ball-bearing drawers with full extension, drawer height 80 mm Drawers with plastic handle strip, labeling strip...

...Capacity for up to 24 wheels or tires with a wheel diameter of up to 740 mm. Capacity for up to 24 wheels / tires With push handle, 2 swivel casters with brakes, and 2 fixed casters. Ball-bearing thermoplastic wheels "trackless" with a diameter of 125 mm, tire carrier spacing of 330 mm, edge protection made of plastic to protect the rims, high-quality hot-dip galvanized, load capacity per compartment 150 kg / level Dimensions: H x W x D: 2117 x 1738 x 690 mm Compartment spacings Compartment 1: 780 mm Compartment 2: 690 mm Compartment 3: 407 mm (top edge of the tire cart)...

...Due to economic factors, we expanded our processing area in 1998. We added machines for mass finishing and deburring technology. With these, we economically perform vibratory finishing, tumbling, barrel finishing, deburring, smoothing, centrifugal grinding, and ball polishing on all metal and plastic parts, such as stamped, pressed, tube, and turned parts, laser parts, injection molded parts...