parts made of metal material Germany

...Timing belts made from this high-quality material impress with their smooth operation and high precision, while also offering excellent dynamic load capacity. The characteristics of the maintenance-friendly belt-driven linear guide axes include short cycle times, high stroke rates, as well as high repeat accuracy and reliability—even in three-shift operations. Their flexible motor connection...

...Material: Thread insert made of steel or stainless steel. Execution: Passivated. Note: Thread inserts allow for the reuse or repair of damaged, stripped, and seized threaded holes. This also enables the recovery of high-quality products from scrap. Thread inserts are suitable for use in various materials, including lightweight metals and cast parts. Inserts with internal threads larger than...

... Roof and side walls insulated with a high-quality, non-combustible core material A1 (EI 120) Roof construction with additional weather protection made of trapezoidal sheet metal Snow load 0.85 kN/m², wind load qb,0 = 0.56 kN/m², wind zone 4, terrain category...

...There are different models of press-fit nuts. Nuts can be made with one or two perfectly flat faces. Self-clinching parts with internal and external threads are specially designed for installation in thin metal sheets starting from a thickness of 0.5 mm. The overall thickness of the components is thus reduced, resulting in weight savings and material efficiency. After installation, the parts are...

...The servomotor-driven cutting clinching system from ECKOLD for automated manufacturing. Cutting clinching is a joining process for connecting sheets made of a soft and a high-strength material (e.g., aluminum and steel). This element-free joining technology does not require auxiliary joining parts and is a cost-effective alternative to punch riveting. • No pre-drilling required • No thermal...

... - Individually equipped with micro annular gear pump, filters, sensors (e.g. flow, pressure, temperature), valves, fluid connections - Chemical resistant materials - Material combinations from stainless steel / hard... Pumps: Micro annular gear pumps of hermetic inert and high performance series for volume flows from 0.003 t Filter: Filters in stainless steel, alloy C22, PTFE or glass * Mass flow...

...-reinforced plastic, which also makes the IN73 economically advantageous. • Highest reliability at low currents (1 mA / 24 VDC) • Up to 4 contacts possible • Actuator and mounting plate made of metal • Tool-free rotation (8 x 45°) and changing of actuators • Standard switch and standard actuator according to DIN EN 50041 • Protection class IP66 and IP67 according to EN 60529 Ambient temperature: –30 °C to +75 °C Material (housing/cap): Thermoplastic, fiberglass-reinforced (UL 94-V0)...

...Robot-guided application of sealing foam in/on components made of various materials The following foams are processed: Fermapor K31-A-2565-1-G: Shore hardness: 27 Shore 00 Fermapor K31-A-2030-1-G: Shore hardness: 20 Shore 00 Framework conditions - Maximum working area of the system 1600mm x 800mm - Maximum immersion depth into the component up to 100mm Material - Processable surfaces: Sheet...

...With our ADB Roll Cart, you can neatly and transportably store small parts such as screws, nails, washers, etc. - Powder-coated metal design - Modular construction - height adjustable - 2 braked swivel casters, 2 fixed wheels, Ø 125 mm - Ergonomic soft grip handle - Usable on both sides - Additional storage space at the bottom - Stackable boxes made of impact-resistant polypropylene (PP) - 4 slot...

...We weld your coolers: Made from aluminum cast with a sheet metal cover, sheet coolers, or machined coolers. Customized to your needs. Reproducible, leak-proof, and of the highest quality. Friction stir welded coolers come in various designs: 1. Cast body sealed with a sheet metal cover 2. Multiple sheet layers combined into a sheet cooler 3. Several rib profiles connected together 4. Prototypes...

...The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other...

... vacuum presses, STROTHMANN developed the CompactTransfer. This compact, electronically controlled transfer allows for stroke rates of up to 16 strokes/min. In 2016, the sixth system was successfully installed in Mexico. The foundations created with the CompactTransfer are also utilized in the HighSpeedTransfer, which is applied in new tandem press lines and retrofit projects. Both the CompactTransfer and the HighSpeedTransfer attach the tooling to a crossbar made of CFRP material. The CFRP crossbar offers low weight...

...Weather-resistant facade cladding as well as stamped and deep-drawn parts are made from aluminum sheets. For these and more applications, we stock sheets with a thickness of 0.5 to 6mm. Sheets thicker than 6mm are referred to as plates. Aluminum plates are particularly well-suited as raw material for precisely manufactured mechanical engineering and CNC turned parts. With excellent strength values and a low specific weight, aluminum is often the clear winner in terms of price/performance compared to other metal materials.

... from extremely tear-resistant nonwoven material in accordance with the DIN 55473 standard. Their use is environmentally friendly, and there is no risk of skin contact. The bags are ready for use immediately after being removed from the collective packaging. No further treatment is necessary. The moisture-absorbing bags should be placed in the packaging so that they do not come into contact with metal. Typical applications: — Warm-packaged metal parts (risk of condensation). — Metal parts with residual moisture in deep holes — Large volume packaging — Long-term packaging DIN:55473...

...Leaf springs are produced by us from stainless steel or spring band steel from coils, as well as from thin sheet metal on modern stamping and bending machines according to customer specifications. As the name suggests, leaf springs are springy; non-springy parts are referred to as stamped and bent parts. We process material with a width of 2 mm to 120 mm and a thickness of 0.1 mm to...

...A key focus of our company is the manufacturing of individual parts or complete solutions based on customer drawings or our own custom designs. Our modern machinery covers the manufacturing areas of CNC milling and turning, welding, grooving, and assembly. In our material warehouse, we constantly stock pre-ground flat materials made from various tool steels, aluminum plates in precision-milled...

...require high precision, large rated moving load, and high maximum rotation speed. By adopting the new technology of material processing, KFB has successfully manufactured bearings of long service life that are highly fatigue resistant and impact resistant. The types of bearings made by KFB for the metallurgical roller mills are: split bearings; unit rollers; support roller bearings; single row...

...A tent for the highest demands. Stable and firm in stance, high-quality tarpaulin material. The galvanized steel pipes have a diameter of approximately 38 mm and a wall thickness of about 1.2 mm. The connectors are also made of metal. The thick pipe thickness ensures exceptional stability, and the included assembly instructions are very easy to understand. All poles and connectors are labeled...

...Throttle valve with rubber lip seal NW 315 mm molded parts made of galvanized sheet metal according to DIN 24147. With reinforced edges. Material: EPDM double lip seal (BSX) galvanized sheet metal Contents: 1.00 piece...

... custom solutions made from cardboard, paper, metal, non-woven fabric, nylon, or wood. Close contacts with long-standing cooperation partners in Asia, Western and Eastern Europe ensure market-appropriate prices while maintaining consistent quality. A continuous flow of goods and a large central import warehouse enable short delivery times. Founded as a chemical factory, we have preserved the acquired...

... the automotive and motorcycle tuning sectors. Our standard services include bar and chuck machining for high-precision turned parts with material diameters up to 42mm (bar) and 160mm (chuck), processing with counter spindles and driven tools, drilling and milling as single and series production on CNC milling machines using CAD/CAM programs, and aluminum die casting with a casting weight of up to 1.5kg. Furthermore, we take on turning and milling orders for small and large series in titanium and Inconel.

QUADRIGA has been a member of the owner-managed SPÄH Group since 1975 and, with nearly 30 employees, represents 40 years of experience in the production of high-quality, cast polyurethane products. The manufacturing focus is on the production and distribution of semi-finished products as well as cast and molded parts made from Vulkollan®, polyurethane, and other PUR systems, which are produced...

...Our Activities: include the production of (metal) springs of various types, such as compression springs, tension springs, torsion or leaf springs, wire bending parts, as well as components made from flat/band material and sheets in single production, small and large series from all common materials. We maintain an extensive stock of spring steel wires made from materials such as SM/DH, CrSi...

... have special shaped parts cut using water jet technology, which are then further processed by us. For the paint industry, we build insulation cabinets made of 20 mm thick PPH, in which the paint is prepared under high voltage for painting. We custom-build drinking and wastewater tanks for your boat or caravan according to your wishes or specifications. We are also happy to make modifications to your existing tanks (such as additional outlets or openings).

... part is tailored in material and design to the needs of the buyer. Whether it is for winding carpets, films, or paper - utmost precision in the manufacturing of machine parts is essential. Each shaft is calculated based on customer data for maximum load, deflection, and torque transmission, and is adapted to the material to be wound or unwound as well as the size of its sleeves. Pneumatically...

... technology. In addition to the mechanical processing of components and parts, the SCHLOTE service portfolio also includes the assembly of ready-to-install components, as well as the design and manufacturing of die-casting molds, tools, fixtures, and special systems. In our CNC machining centers and automated production lines, we process cast parts made from various material alloys. This includes, in...

... high optical demands, enclosures made of aluminum with long or numerous weld seams, thin-walled sheet metal parts, container and tank construction, body components, control cabinets and junction boxes, frames and structures made of tube and sheet, rotationally symmetrical components (turned parts). Laser welding offers the opportunity to rethink the production of components. By optimizing and reducing material thicknesses, we contribute to sustainability and resource efficiency. To achieve optimal results with minimal effort, we take care of the entire process chain.

... parts are produced from nearly all metallic materials, focusing on thin-walled sheet metal parts with wall thicknesses ranging from 0.50 to 4.0 mm in stainless steel and aluminum. Our expertise and the handling from A to Z, from inquiry to delivery, have made our products an essential component of both German and international branded goods. The innovative spirit of our designers and process...