fluid Germany

... training plan tailored to your needs. Our experienced trainers impart the knowledge in an interactive and hands-on manner and are available to participants for questions and discussions. By the end of the training, participants will have a solid understanding of the fundamentals of aerodynamics and fluid mechanics and will be able to apply this knowledge in their own projects. The "Fundamentals (Aero, Fluid)" training is a valuable opportunity for professionals and engineers in the metrology industry to expand their knowledge in these important areas and strengthen their professional profile.

...Merecs develops custom testing systems for heat pumps, gas, fluid, and water systems. Our engineers and technicians in electronics, installation technology, and mechanics build the systems entirely in-house at our location in Steinfurt. Following this, delivery and commissioning take place both domestically and internationally. Our offerings include: - Development test benches - Lifetime test...

... application you can have energy savings up to 15 %.     A bigger construction is the Thermo-Fluid M, which is optimised for utilisation of waste heat from process air, flue gas or exhaust air. An energy yield of up to 1600 kW is possible, whereupon the pressure drop in the process air is less than 1.5 mbar. The pressure drop in water circuit is less than 200 mbar.   This Shell and Tube heat exchanger is low maintance using the small type of construction. The Thermo-Fluid M modular and the standard temperatures are up to 300°C too.    Both Shell and Tube Heat Exchangers are low maintance. One-off or...

... sludge), or acids. Made from 100% natural fibers, they are a sustainable solution. We continuously develop our filter material to achieve the best results: highest oil and fluid purity — efficient and cost-effective in every application. Areas of application: •,Mineral oils and synthetic fluids up to ISO VG 460 / 40 °C •,biodegradable oils •,hydraulic oil, HFC and HFD fluids •,lubricating oil, gear oil •,coolant lubricants •,turbine oil, compressor oil •,gas engine oil •,fuels, diesel •,motor oil •,hardening oil •,thermal oil •,transformer oil...

We are manufacturers of chemical products such as AdBlue, vehicle care products (de-icers, antifreeze, etc.), household cleaners, distilled water, and much more under RETAILER’S BRANDING or our own brand Robbyrob. Our headquarters is located in Berlin, Germany, and our production site is in Vetschau, Brandenburg, just an hour's drive from Berlin. We have a production site with 400,000 m² of open...

Kendrion Kuhnke Automation is your specialist in magnetics, fluid technology, and control engineering, offering safe, precise, and innovative components and assemblies for various applications. Kendrion Kuhnke Automation is part of the Industrial Division of Kendrion N.V. and operates as the Business Unit Industrial Actuators and Controls (IAC). In the development and manufacturing of electromagn...

Founded in 1992, bdp Group, with 150 employees, is headquartered in Berlin and has 14 additional offices in Bulgaria, China, Germany, Poland, Spain, and Switzerland. The subsidiary, which has been in existence since 1982, today known as bdp Mechanical Components, is a specialist provider in the field of international sourcing of high-quality casting, forging, machining, and automotive parts for Eu...

Karl Treske GmbH is a technical wholesale company based in Berlin since 1909, specializing in rubber and plastic products, some of which are produced in-house. Our customers come from industry, crafts, and public administration in Europe and worldwide. We sell and manufacture, among other things, seals, rubber and plastic profiles, rubber rollers, bellows, rubber molded parts, PTFE parts, rubber,...

For over 25 years, ANKURO has been supplying semi-finished products, products, and services related to high-performance materials, specifically the so-called refractory metals. We supply and process titanium and titanium alloys, tantalum, molybdenum, TZM, zirconium + zirconium alloys, tungsten, as well as nickel and cobalt and their alloys. We can also assist with other non-ferrous metals such as ...

...EGE sensors for fluid mediums with integrated measuring & amplifier are compact devices with extremely robust housing and integrated measuring and amplifier. The current flow state is displayed at the sensor using LEDs. The measurement takes place without mechanically moving parts using a thermal measuring element. Limit values are set directly at the device. These sensors are used wherever a...

...In order to prove the quality of the fluid-carrying parts, all hoses, pipes, pressure vessels and other components are put under pressure until they burst. The process is precisely measured and documented in order to optimally design the components for specific applications.

Highly advanced torque systems for controlled screwing significantly enhance the efficiency of industrial manufacturing processes. For this purpose, we offer selected assembly tools and innovative measuring technology in recognized industrial quality. From well-established torque wrenches to excellent testing devices, powerful pneumatic tools, and state-of-the-art EC screw systems, as well as cust...

...FLUID FILM Gel B FLUID FILM Gel is a higher-viscosity, soft, physiologically safe, and solvent-free single-layer corrosion protection coating with a very high lanolin content.

... ... +60 °C (-4 ... +140 °F) Viscosity range:0.3 – 100 (max. 1,000 *)mPas Precision CV:1% (Coefficient of variation CV) Velocity range:100 – 6,000 (min. 1 *)rpm Fluid connection:manifold assembly M2.1 Wetted parts:PEEK™; shaft ZrO2 ceramics; rotors partially stabilized ZrO2; epoxy resin; shaft seal: graphite-rein Motor:DC-motor with graphite brushes, assigned power rating 4.5 W, nominal voltage 24 V, digital magnet en Electrical connection:10-pole connector Dimensions (L x W x H):Ø 18 mm, length 90 mm Weight:approx. 65g Remarks:* depending on accessories, Customized solutions on request.

...Fusion pump specially designed for the production of medical tubes made of TPE, PE, or PA. The fusion pump is installed downstream of the extruder in the extrusion process to increase pressure and ensure a constant discharge of the molten mass towards the die. It is particularly important for medical tubes that the wall thickness and quality are absolutely consistent and uniform. Fluid: for glue, melt, for polymers Drive: electric actuator Priming: under load, self-priming Technology: internal gear Field: industrial Other features: compact, extrusion...

... equipped with a holding bracket. The bracket is powder-coated in RAL color 5012. However, other colors are available upon request. Special shapes of the bracket, such as table mounts, are also available upon request. Please contact us. For economic and environmental protection The Schucotopf for every machine and every workplace Resistant to: lubricating oil, drilling oil, transformer oil, linseed oil, turpentine oil, drawing oil, soapy water, acid-free soldering water, gasoline, benzene, kerosene, ether, carbon tetrachloride, active cutting fluid oil "OPTA" 268...

...Lotions are emulsions or suspensions based on water or alcohol. Unlike creams, lotions contain oil instead of fat, are therefore more fluid than creams and easier to apply to the skin. Usually, lotions contain little or no alcohol, which makes them attractive even for sensitive skin. Lotions are used to treat, care for or cleanse the skin. They contain light care substances such as almond oil...

...The fluid boundary between the classic conveying function from 'A' to 'B' and the 'active' involvement in the production process is often crossed with Siegling Transilon. In the textile industry, our process belts layer ultra-thin nonwoven materials, in large bakeries they shape dough pieces, in the wood industry they compress the chipboard in the pre-press, and in dairies, milk is coagulated...

...Short description: For hose reels New generation of swivel joints for hose reels. Advantages: without losses in pressure and efficiency, optimized in terms of fluid mechanics, hence no extra load for sealing gaskets, extremely durable.

...MaquiBright® significantly enhances tear fluid production and relieves dry eye-related symptoms, tackling both objective and subjective symptoms. MaquiBright® helps to alleviate the source of dry eyes by not only masking the symptoms but addressing the causes directly. Unique Features - Restoration of healthy tear fluid generation - Relieves dry eye-related symptoms like stiff shoulders...

...All information at a glance: "Cematic Blue Electric Pump (230V, approx. 35 l/min)" for AUS 32 (AdBlue®), coolant and windshield washer fluid with a flash point > 55 °C self-priming plastic diaphragm pump, 370 W, 2800 RPM Connection on both sides 1" female thread including hose connection pieces DN19 with union nut ON/OFF switch 2 m cable with Schuko plug completely installable in any position Weight in kg: 5 Further links to "Cematic Blue Electric Pump (230V, approx. 35 l/min)" Questions about the item?

...Mechanical and electromechanical valves: valve bodies, fittings, pistons, cores, shafts, polar magnets, piston sliders, cone shafts. The product range of Poppe + Potthoff also includes very precise components such as solenoid valves for controlling flow rates and fluid pressure for numerous applications in vehicles.

Your partner for quality and service. Mabanol serves national and international trading partners and users from various industry segments with its wide range of lubricants and bitumen. When it comes to lubricants, your expectations should be fundamentally high. Mabanol is the independent brand of the medium-sized German lubricant trade. Our diverse lubricant products guarantee precision and relia...

... a wide range of applications, be it water treatment, industry, agriculture, construction or other areas. They are delivered as complete units containing all the necessary components for efficient fluid delivery. Tailor-made configurations: We offer pump units in various configurations and sizes that can be customized to meet the specific requirements of our customers. From simple pump sets to complex multiple pump systems, we offer customized solutions tailored to individual needs.

...The K87 fluid connector seal is specifically designed for static applications. Max. temperature: 105°C Min. temperature: -30°C Application: Axial...

Our area of activity includes international trade and the distribution of chemical products. We are happy to assist you in realizing your outsourcing projects. This ranges from market analyses to the creation of marketing plans, as well as taking over the complete transport handling and "After-Sales-Service". As part of outsourcing projects, we take on marketing, sales, and logistics functions f...

... complete continuous granulation line: GRANUCON®. Dryer operation is based on the fluid bed process. A general disadvantage of continuous fluid beds is the wide retention time distribution within the machine. Lödige’s developers have looked into this problem and have found a solution: integrating a screw in the fluid bed dryer. This has a limiting effect on the retention time distribution. — Exchangeable floor — Quick screw removal — Integrated WIP cleaning — Individual purging of filter elements...

...diamond marking fluid red | 500 ml bottle Red marking color used as a contrast agent in metalworking to make fine drilling points and marking lines visible. The liquid forms an elastic and evenly covering film on the metal surface to be marked, which does not splinter when scribing. Ready-to-use liquid that leaves a non-glossy elastic film on the surface to be processed within seconds after...

Why we have been active in the market for 24 years: • Extension of equipment availability MTBF => MTBR • Maximization of investment profitability in equipment • Manufacturer-independent delivery of customized sealing solutions of all kinds • Minimization of environmental impacts from equipment • Reduction of energy consumption in companies • Drastic minimization of oil and water consumption • Impr...

About Us Lungwitz Industrie- und Anlagenservice GmbH has been successfully supporting internationally active companies, building service providers, and insurance companies since 1994 with a wide range of innovative solutions for the cleaning and maintenance of industrial facilities, as well as the remediation of fire, water, and environmental damage. The family-owned company stands for consistent...