Results for

Gas technology components - Germany

24 Companies

1 Product

STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
CARL CROONEN GMBH MARINE DIESEL TECHNICS

Germany

With almost 100 years of experience. Now managed in its fourth generation, our company has specialised in the global distribution of high quality spare parts for diesel and gas engines. We provide technological progress from the heart of development. Benefit from our direct links with industry, combined with our high flexibility in all areas. Our products.: Spare parts for diesel and gas engines, attachments and spare parts, components for control systems, control and monitoring systems, drive technology and seal manufacturing.

Website
APROVIS

Germany

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

All the products for "gas technology components"

ActiCo - activated carbon filters

FriCon - gas treatment

Process gas heat exchanger

Website See all products
ZWP ZAHNRADWERK PRITZWALK GMBH

Germany

We see ourselves as an extended workbench, we are a mechanical engineering supplier as well as a supplier for the industry that needs individual transmission parts. Customers come from marine, railway, wind power, special gears / special gears and plant construction. Our company continuously invests in new manufacturing technologies to be prepared for future challenges. We realize standardized, but also highly complex and extremely demanding gears and shafts as well as ring gears (also retrofit and heavy machinery! ). That is why ZWP, with more than 200 employees, is a leader in the manufacture of high-precision products "Made in Germany". We are the contact for gear technology, main drives, drive components, pinions, machine elements, ship gears, large gears, mining technology, gear production in general, underwater turbines, ocean current energy, tidal turbine, hydro energy, hydro turbine, toothed shafts for well-known companies and we also offer you the strategic partnership as a reliable mechanical engineering supplier. As experts, we already take on the outsourcing of manufacturing companies. It is not uncommon for us to be a strategic supplier for wind turbines, hydroelectric power plants, gas compression or central transmission parts. For example, our products are also used for railway gears, planetary gears, marine drives, industrial gears and crowned gear couplings, etc.

All the products for "gas technology components"

gears and pinions for gas compression / process gas industry

Components for turbine gearboxes / turbine gearboxe

Website See all products
HPS SOLUTIONS GMBH

Germany

HPS Solutions is a ISO 9001: 2015-certified, established specialist wholesaler and service provider in the field of fluid and gas technology. Our focus is on the sale of precision components such as pipe fittings and fittings made from stainless steel or high quality special alloys such as Hastelloy, Super-Duplex, Inconel, titanium and many more. As a specialist for individual components and assemblies – with more than 30 years of practical experience – we are a reliable partner in a variety of industries. Our philosophy of a manufacturer-independent product range guarantees you the best availability at prices in line with the market. From our Munich-based headquarters, we provide our renowned customers from industry, research and development worldwide with approx. 35, 000 quality products held in stock, as well as complete instrumentation solutions. Request your sample today!

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ALUMINA SYSTEMS GMBH

Germany

CERAMIC METAL COMPONENTS FOR USE IN HIGH-TECH APPLICATIONS. Vacuum-tight metal ceramic composite components – manufactured from the high-performance material aluminium oxide and a metallic join partner – are the core business of Alumina Systems GmbH. These components are used where switching of maximum energies is involved, e.g. in energy, laser, X-ray, plasma, medical and accelerator technology. A great advantage of technical ceramics is the high electrical insulation up to high temperatures. Fields of application are, for instance Sensors in ship engines (thin-wire bonding), precursor gas distributing rings with wafer coating (PE-ALD) or small engines for satellites. Here, ceramic composite components first allow the application to be realised. In addition to standard products like electrical feedthroughs, vacuum switching tubes or vacuum insulators, the demand for customer-specific high-end applications is constantly increasing. At Alumina Systems, mechanical/thermal stresses on a component are simulated here via the finite element method (FEM) even before the actual construction of the component, and the most suitable design for the application is thus selected – without having to produce a real component.

Website
HANS BERG GMBH & CO. KG

Germany

Perfection to detail is the key to a precise whole. That principle has consistently remained the company philosophy ever since it was first founded in 1950. Hans Berg GmbH & Co. KG is an internationally operating manufacturer of deep-drawn and metal tube components for a vast variety of industries. The Group has sites in Germany in Reichshof (headquarters) and Florstadt, and in Turkey in Dilovasi/Istanbul, employing a staff of roughly 600 people and specialising in cold-forming, joining, threading and cutting tool technology. Berg is the technological and market leader in the field of fittings and connections for radiators and convectors. Other important business sectors include heating, cooling and the automotive industry. As a development partner, Berg develops and manufactures high-precision and safety components for large and specialised suppliers in the automotive industry, for example applied within the fields of vibration damping and airbag gas generators.

Website
BOURDON HAENNI GMBH

Germany

Bourdon is now one of the world's leading brands for mechanical process instrumentation and, with its international sites, is part of the Baumer Group. It was created in 2005 through the acquisition of the service portfolios and expertise of the formerly well-known brands Bourdon-Sedeme and Haenni. This expertise and passion is based on the Bourdon-tube gauge invented by Eugène Bourdon, which is a key component for precise mechanical pressure measurement technology. The extensive product range is manufactured with high vertical integration and state-of-the-art process methods at the company's own production sites in France, Germany and India. In addition to the standard products, such as thermometers, pressure gauges, pressure and temperature switches, this also includes a variety of customer-specific solutions which are mainly used in the sectors of oil and gas, energy/power stations, water supply, chemicals, and heating, ventilation and cooling.

Website See all products
WETEC GMBH

Germany

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

Website
AIS HENSCH AUTOMATION-INDUSTRY- SOLUTIONS INH. IGOR HENSCH

Germany

Welcome to AIS Hensch Automation-Industry-Solution, your reliable procurement partner for high-quality industrial products and solutions. Based in Isernhagen, we operate internationally to fulfil the needs of our customers in various industrial sectors. Our focus is on MRO equipment and industrial products for plant construction and maintenance. Quality, reliability and efficiency are the cornerstones of our services. Thanks to our global network, we procure spare parts and components at top prices, including the manufacturer's warranty and optional extended warranty. Our expertise also spans the oil and gas, water/wastewater, refineries, automotive, mining services, shipbuilding and wind power industries. We not only offer procurement, but also complete solutions for plant automation. Our purchasing experts support you in choosing and implementing the best technology. Our portfolio includes industrial CPUs, motors, pumps, hydraulics, measurement technology and heavy-duty contactors, as well as pumps for the highest-quality pure water. We work independently of the manufacturers, so we can offer you the best solutions at the best price. We provide support through procurement, project planning and market research for new developments. Our goal is establish long-term working partnerships with our customers, helping them meet their objectives, ensuring their production is free from problems. Contact us to discover pioneering projects and customised solutions.

Website See all products

WALTER STAUFFENBERG GMBH & CO. KG

Germany

The companies in the STAUFF Group develop, produce and distribute pipe components and hydraulic accessories for mechanical engineering and plant construction, as well as for industrial maintenance. The Group's' typical areas of operation not only include mobile and stationary hydraulics, but also commercial and special vehicle construction, as well as the transport technology and energy technology sectors. STAUFF products and solutions are also used in the marine, oil, gas and food processing industries, as well as in process and chemical technology. STAUFF's product range currently includes around 40, 000 standard components in ten product groups and a variety of special and system solutions which can be implemented according to customer specifications or on the basis of the company's own developments. There are currently subsidiaries in 18 countries and a global network of sales partners. This means that the company has a significant presence and can provide the highest levels of availability and service capabilities on site.

See all products
LEISTRITZ PUMPEN GMBH

Germany

Rotation – the motion that connects us. Leistritz is synonymous with technologically demanding and highly innovative products. We are a global group with four divisions – turbine technology, pump technology, extrusion technology and production technology – under the umbrella of Leistritz AG. We offer a wide range of solutions, with turbine components for the aerospace industry and energy technology, screw spindle pumps for sectors such as the oil and gas industries, the chemical industry and the shipbuilding industry, twin-screw extruders for the plastics and pharmaceutical industry as well as tools and machine tools for the automotive industry and mechanical engineering. Our exceptional understanding of products and technology is the result of our consistent development dynamic. We have approximately 1800 employees across our various locations worldwide.

All the products for "gas technology components"

Oil & gas

See all products

MICRO-HYBRID ELECTRONIC GMBH

Germany

MICRO-HYBRID Electronic GmbH is a leading medium-sized company providing sophisticated customized electronics solutions. We have been developing and manufacturing innovative electronics for over 30 years. Our customers benefit from unparalleled solutions for control tasks in challenging environmental conditions. Our portfolio ranges from ceramic substrates and enclosures for miniaturized electronic modules for sensor control to infrared components and sensors for temperature measurement and gas analysis. MICRO-HYBRID is consistently reshaping the global world of electronic micro systems technology. We create high-precision components and sensors by utilizing above-average development expenses, a high level of skill and know how as well as an extensive collaborative network. As we continue with the development of technologies and materials and work on technological innovations, we create customized solutions with significant added value for our customers. Our extensive application experience in various industries allows us to utilize a unique technological range to solve your development task. This is why technology businesses worldwide choose us to assist them in solving their measurement challenge.

All the products for "gas technology components"

MicroSENS 180-HS

See all products
BARTEC

Germany

World Market Leader in Explosion Protection. BARTEC is a leading manufacturer of explosion proof equipment preventing explosions wherever hazardous substances could occur. BARTEC’s product portfolio ranges from complex measurement and analysis technology via innovative heating technology solutions to explosion-proof components and systems for automation, control and communication. BARTEC’s customers (comprising a balanced mix of OEMs, EPCs and end customers) operate in a wide range of industries including oil & gas, chemical, petrochemical, mining and pharmaceutical. BARTEC operates globally and is headquartered in Bad Mergentheim, Germany. There are working situations in which sparks should never be allowed to fly! For these situations the explosion protection specialists at the BARTEC Group develop innovative products and solutions. The reason: wherever hazardous substances such as flammable gases, vapors, mists or dusts can occur the component and system solutions developed by BARTEC prevent explosions and ensure the safety of both people and the environment.
HACKBARTH KUNSTSTOFFVERARBEITUNG GMBH

Germany

We manufacture pickling and electroplating plants, equipment and tanks, flue gas scrubbers and complex pipework for discerning customers all over the world. We transport and install prefabricated plant components upon request together with our core Hackbarth Kunststoffverarbeitung team and reliable logistics and installation partners. Installation at your company is carried out according to our own strict standards. On-site monitoring is taken on by our particularly experienced employees who, if required, are also qualified to communicate with you in professional English. We have modern machinery with all the machining options of modern plastic technology at our disposal. We are a specialist company certified in accordance with section 19 of the German Federal Water Act (WHG) and are subject to continuous monitoring by TÜV Rheinland. Our qualified personnel have all the welding certification required in the plastics processing sector. We regularly provide all our employees with further training in accordance with the applicable industrial safety guidelines.
BIELOMATIK LEUZE GMBH + CO. KG - LUBRICATION SYSTEMS

Germany

For more than 70 years, the name bielomatik has been synonymous with installation and machine construction in the lubrication technology and plastic lubrication system sectors. With more than 350 employees at our main plant in Neuffen, Baden-Württemberg, and 300 employees at our sites in Romania, the USA and China, we make innovative manufacturing technology a reality. Our products.: Systems and components for centralised lubrication of machines and installations. Modular distribution systems, pumps and control systems for series production or solutions to specific problems. Minimum quantity lubrication systems for metal cutting processes. Sustainable, resource-efficient technology for drilling, milling, sharpening and turning. The "mobile lubrication unit" was specially developed to meet the requirements of the aerospace industry. Machines and complete production lines for welding and machining plastic parts with heating element, vibration, infrared, gas convection or laser technology.
REGAWATT GMBH

Germany

ReGaWatt GmbH plans and builds highly-efficient energy systems based on all types of biomass made from mechanical pulp. The technological core component is an updraft gasifier with a fuel performance of 1 to 5 MW. The combination of this highly robust gasifier with different modules deigned to ensure clean combustion, gas cleaning systems, gas engines, ORC system, heat recovery, etc. gave rise to the Kombi Power System®. References can be found in Germany, Switzerland, the Netherlands and Japan. After a 10-year development process, pilot systems and second generation commercial systems, our aim is too make the Kombi Power System more cost effective and fuel-flexible. To this end, a small test system – fully equipped with gas cooling and ESP – has been designed and built. Thanks to this test system, we can now test and assess special customer fuels.
STAHLKONTOR GMBH CO. & KG

Germany

Stahlkontor is an international supplier for components and assemblies made of high-strength steel and armor steel for the application areas of Defence, Aviation, Industry and Rail, as well as other civilian areas of use. More than 150 years of tradition and experience in working with steel and non-ferrous metals stand for extensive material and process know-how. State-of-the-art fleet of machinery using not only tried-and-tested cutting, joining and processing techniques, but also future-oriented technology. With its extensive investments, for example in additive production processes or the patented Double-LaserHybrid-Process (DLHP®) which was developed in-house, Stahlkontor has opened up new perspectives in economical precision production of parts made of high-alloy steel. The core competences of Stahlkontor are spread across the three service areas of cutting, joining and cold forming. Laser-beam cutting, water-jet cutting and HSC contour milling are used for cutting according to the type and thickness of the raw material. A choice of laser-beam, laser-hybrid and inert-gas welding are available as joining technologies. For cold forming, Stahlkontor offers bending, compression molding and edging as available in-house processes. With range of mechanical processing, welding processes and surface treatment available at Stahlkontor, it is possible to manufacture components and assemblies ready for installation and further processing.
C4E TECHNOLOGY GMBH

Germany

C4E is a reliable, innovative partner that designs and implements hard coating solutions that enable products to perform better. C4E’s proprietary deposition technology and equipment for hard coatings allows OEMs to coat components to reduce friction, wear, and corrosion. There are multiple applications in automotive, oil and gas, medical, aerospace, military, textiles, consumer electronics and machine tools that benefit from our technology. Our environmentally friendly technology adds value to your products: Low Friction Extreme Hardness Excellent Wear Resistance Corrosion Blocking Chemical Inertness Bio Compatible Excellent Uniformity C4E understands your business and is partnering with multiple customers to help them grow and better compete in their industry with innovative solutions for hard coatings, including pre-treatment, cleaning and quality control.
BLASCHKE UMWELTTECHNIK GMBH

Germany

With 40 years of experience and over 1, 000 installed systems globally, Blaschke Umwelttechnik is your expert worldwide for professional exhaust gas extraction. No matter whether it is a railway depot, fire department, workshop or industrial business: We offer you proven extraction solutions for the widest range of industries and application areas. Our innovative systems effectively protect your employees from diesel engine emissions and other air pollutants. All Blaschke extraction systems work reliably, cost-effectively and efficiently. Rail-connected diesel vehicles produce large quantities of diesel emission (DME) during operations. If diesel locomotives or railcars are serviced with a running engine in closed halls, the hazardous material concentration will reach a toxic level within a short period of time. The aggressive exhaust gases contaminate the breathed air of the depot workers and cause a scratchy throat, eye irritations or dizziness. The health of the affected employees can be tremendously damaged in the long run. The particle components of the diesel exhaust gases that are classified as carcinogenic are considered particularly critical. Blaschke extraction technology offers you and your employees unique, effective protection from hazardous air pollutants: the precise elimination of the exhaust gases directly at the source.

SCHÜTZ GMBH MESSTECHNIK

Germany

Schütz Messtechnik is an experienced and qualified company that has been operating as a service provider and an equipment manufacturer for energy companies since 1968. In the amenities industry, Schütz checks the public gas pipeline networks in accordance with the regulations G 465, G 466/I and G 466/II of the German association for gas and water (DVGW), carries out leak and pipeline detection and exchanges meters. In addition, it holds technical seminars and training sessions for employees from utility companies. Schütz GmbH has been certified by the DVGW as a company specialising in checking gas pipelines. Energy companies using a geographic information system (GIS) can check their pipeline network with Schütz's digital technology. Among Schütz GmbH's client base today are more than 100 municipal utility companies, with whom the company maintains long-standing, close and trusting business relations.

All the products for "gas technology components"

GasPro Multiple Gas Detector

GasMan

GP 2000

GPL 3000

GPL 3000 Ex

Website See all products
HÖNTZSCH GMBH

Germany

Flow measurement technology has been the core of our business since our company was founded in 1966. From 1976 onwards, Höntzsch has worked to develop, manufacture and distribute innovative and groundbreaking products in the flow measurement sector, and has been part of the DMT GmbH & Co. KG group in Essen as of 2012. Höntzsch also offers solutions for special areas of application such as explosive zones in accordance with ATEX, for gases with operating temperatures up to 550 °C, for measurements under regulatory control in accordance with the "TA Luft" air pollution control regulation and sections 13 and 17 of the "BImSchV" (the German Federal Imission Protection Ordinance), for high flow speeds of up to 200 m/s or for flows with changing directions of flow. Our DAkkS-accredited calibration laboratory completes our range. Air flow meters, calibration service for electrical measuring and testing equipment, development of flow meters, intrinsically safe sensors for explosion protection areas, compressed air measurement, intrinsically safe equipment for explosion protection areas and compressed air flow meters

Website
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Germany

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Website
WITT-GASETECHNIK GMBH & CO KG

Germany

WITT-Gasetechnik is a manufacturer of gas-related equipment that meets the highest quality requirements. Facts & Figures Founded in 1945 Family business in 3rd generation Approx. 200 employees Located in Witten, Germany Global network of subsidiaries and partners Customers in more than 80 countries Products 'Made in Germany' Comprehensive quality management Today, WITT offers a complete range of gas safety and control equipment. These products include gas mixers, gas analysers and metering systems, as well as package leak detection systems. With this wide array of products, WITT has developed from a two man business to a world market leader. The WITT headquarters are in Witten, Germany. Still a family-owned business, WITT, through its subsidiary companies and partners, now operates worldwide. The requirements and demands of our customers central to our activities. We are flexible, fast-reacting and strive to offer the best possible service.

All the products for "gas technology components"

Gas Filters

Gas Mixers / Gas Blenders

Flashback Arrestors

Safety Relief Valves

Gas Mixers for Food Technology

See all products

Find quotes for

Filters

Results for

Gas technology components - Germany

Number of results

24 Companies