gas drying Germany

...What you can expect with an APROVIS FriCon: - FriCon systems are ready for connection - The FriCon removes the moisture from the process gas by dropping below the dew point temperature - FriCon gas heat exchangers operate at elevated pressure, ambient pressure and negative pressure - Condensate formation in downstream gas lines is avoided - Suspended matter is separated - The FriCon is available in different sizes and designs...

...The SD gas washing drying is a combined process for drying and partial cleaning of biogas.

...Intelligent Software. Easy Operation. OmniStar and ThermoStar are compact benchtop analyzers for sample gases that are at atmospheric pressure. They are the perfect complete solution for gas analysis, particularly in chemical processes, the semiconductor industry, metallurgy, fermentation, catalysis, freeze-drying, and environmental analysis.

... and power plants. The heat exchanger transfers heat from the exhaust gas to a fluid (water or water-glycol solutions). When heated, this fluid can be used in central heating systems, for preheating air in the combustion chambers of furnaces and turbines, for drying coal, pulp, wood, and other materials, as well as for generating electricity using a Rankine process.

... higher than the moisture content in the atmosphere, the speed of the drying process depends on gas exchange (convection area, air flow). Since vapor pressure typically increases at higher temperatures, facilitating drying, the drying process of the product to be treated is designed according to the necessary parameters based on the type of liquid being removed.

... reduces space requirements, investment, and operating costs. High-quality insulation and optimal design of the air circulation ensure an efficient energy balance. Variants: - Heating with gas, oil, or electricity - Direct or indirect heating - Dryer closure with A-channel, airlocks, or doors - Additional infrared zones...

...see product description Large container construction; Conveying technology; Turbine construction; Aircraft construction; Metallurgical industry; Pressure vessels; Nuclear power plants; Medical technology; Coal-fired power plants; Biogas plants; Wind power plants; Heat exchangers; Ship and vehicle construction; Stationary furnaces; Gas burners; Glow tubes; Drying processes; Oil burners and oil burner controls; Hot air heat treatments with high-speed burners...

...ADSORPTION DRYING UNIT TTR 3700 Even a dehumidification capacity of 500 kilograms per day is no challenge for the TTR 3700 – not even in cold environments with a low dew point. This is why this drying unit is highly qualified for various air and gas dehumidification tasks in industries, logistics, or supply companies, for example, to ensure production or products, or to preserve the value of machines, inventory, or buildings, permanently protecting them from corrosion or the formation of condensed water or mold. Technology: desiccant Mobility: stationary Fluid: air...

...They promote flue gases and hot air and are suitable for boiler systems, drying systems, open fireplaces, and other heating appliances up to a temperature of 250°C. In these indirect exhaust systems, a portion of the exhaust gases is drawn in by a fan, accelerated, and then blown back towards the chimney outlet. When the heating appliance, such as the fireplace, is not in use, the auxiliary fan...

...Bottled gas is also employed in road construction, for welding and soldering equipment, as well as for rapid drying in construction sites. Because the low-emission combustion of liquefied gas also allows operation in enclosed factory halls, this fuel is an ideal energy source for forklifts, sweepers, and transport vehicles in warehouses and commercial enterprises.

... heating, tempering, drying, hardening, etc. all designed to your space conditions. All heating technologies, from electrical, direct or indirect gas, oil can be applied. Together with the customer, the Reinhardt industrial ovens are integrated into the production flow. In a classical batch oven, hood oven or pass through oven all thermal processes can be applied with the highest accuracy. Requirements such as lifting doors, charging carrier, transport and handling systems can be easily applied. ...

...Surface Technology In the field of surface technology, we offer a comprehensive service package for the automotive and supplier industry. Our product range includes paint and coating supply systems, PVC and primer supply systems, as well as GRACO components. Thermal Process Engineering for the Systems solid / liquid liquid / liquid liquid / gas Extraction Distillation Steam Generation Drying...

...Extreme-temperature grease on the basis of perfluorinated polyether oils (PFPE) for use in food processing technology at maximum loads and temperatures. Grease lubrication of friction and rolling bearings in the high-temperature range Application, for example at tunnel kiln cars, baking, burn-in and drying furnaces, hot gas units, reaction vessels, boiler plants, roller and conveyor rollers in...

... fluid and oil purities — no matter how specific the conditions are. CJC® oil cleaning systems are renowned worldwide and are used in industry, shipping, mining, power plants, and wind energy systems. Our portfolio includes: • bypass filters • water separators • filters for heavy oil, quenching fluids, thermal oil • systems for the recovery of cooling lubricants • lubricating oil filters for gas engines / diesel engines • fuel cleaning systems, tank filters • dewatering systems for insulating oil and transformer pits • flushing filters...

... construction drying. Its automatic hot gas defrosting feature ensures that this practical air dryer is operational even in cold temperatures. Room dehumidifiers not only protect valuable assets on damp construction sites, but with the Dehumid BT construction dehumidifier, you can also prevent costly downtime in a cost-effective manner. Modern air dehumidifiers also help preserve the value of the building...

...Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very...

...Competent technology for: Chemistry, pharmaceuticals, food and feed production, ceramics, environmental and recycling technology Process In the continuously operating convection belt dryer, the product layer, applied as a ventilated bulk material, is transported on a perforated belt through the drying chamber and dried in the process. The drying gas flowing through the product layer serves both...

...The VSW spiral burner is particularly suitable for welding bitumen sheets, preheating tar surfaces, drying areas, drying joints, thawing, and burning off. It achieves optimal combustion through simultaneous evaporation and heating of the gas in the spiral, resulting in higher heat output and significant gas savings. It impresses with its ease of use, is compact and lightweight. The integrated and robust support base provides the TURBO with a stable stand. Quick burner replacement and the integrated hose rupture protection are additional advantages. THE TURBO: THE LIGHTEST IN ITS CLASS...

... LUXOR A series consists of ten models with drying capacities ranging from 80 to 2400 m³/h. Each advanced drying system can be flexibly combined with all LUXORBIN A drying containers from 15 to 2400 liters. Additionally, Motan offers a range of extra-large drying containers with volumes from 3,000 to 13,000 liters. These are also available with gas heating. Technology: granulate drying Process: injection molding, extrusion Material productivity: high Color: RAL...

...Ensuring plant safety through a dual safety system Efficient reduction of maintenance efforts on SF6 gas-filled equipment (gas drying during operation) Use of two parallel filters (type GPF-10) for high water absorption capacities Low maintenance requirements Simple and intuitive operation via 7" touchscreen...

...A particular strength of MEIERLING lies in the engineering and manufacturing of hot gas fans up to 1150 °C. To ensure temperature resistance, MEIERLING possesses aerodynamic expertise and specialized know-how in the design of impeller geometries. Additionally, decades of experience are drawn upon in material selection and processing at MEIERLING. Application fields include industrial furnace systems and drying systems. Industries served are metal production and processing, glass industry, and ceramics industry.

...Shell and Tube Heat Exchangers | Air Coolers, Air Heaters, Pressure Vessels | Gas cooling in pneumatic conveying systems | Air cooling in industrial refrigeration | Air drying in textile machines | Air heating & cooling in HVAC systems | Coolers for A.C and D.C motors | Coolers for power transformers | Diesel and gas engines water cooling | Air preheaters for boiler plants | Economizers for...

...Chamber Ovens for Small Quantities or Batch Operations Chamber dryers are an ideal option for smaller quantities and/or batch operations. Heating can be done either directly or indirectly with gas. Alternatively, operation can also be electric. Loading can be done manually or automatically, depending on your preference.

...A special competence of MEIERLING lies in the engineering and manufacturing of hot gas fans up to 1150 °C. To ensure temperature resistance, MEIERLING possesses aerodynamic detailed knowledge and specialized expertise in the design of impeller geometries. Even in material selection and processing, MEIERLING draws on decades of experience. Application Areas - Industrial furnace systems - Drying systems Industries - Metal production and processing - Glass industry - Ceramics industry...

... consisting of a floor agitator with springs and discharge auger carries the wood chips reliably into the plant. Here it acts as a fuel with maximum convenience. If the calorific value equivalents are examined, we see that 1,000 litres of fuel oil is equivalent to 12 m³ of wood chips. The ratio is the same for 1,000 m³ of natural gas. Heating with wood pellets - without intermediate heat transfer...

...{"Applications:":"","Grilling with a gas grill":"","Fl.-Body color:":"RAL 7002, Olive gray","Drying processes, e.g., of grain":"","Pressure: 42.4 bar":"","Properties:":"","Asphyxiating in high concentrations":"","General data":"","Heat of vaporization:":"427.8 kJ/kg","Boiling point at 1013 mbar:":"Temperature: -42.1 °C / 231.1 K Liquid density: 0.58 kg/l","Colorless":"","Fl.-Shoulder color:":"RAL...

...These are wet paint or electrostatic powder coating curing ovens used in automated systems. They operate continuously. They can be designed in various sizes and shapes to save space. Heat loss is prevented by air curtains and specially designed air switches at the inlet and outlet. They can be powered by gas, diesel, or electricity. The indirect heating system maintains a high level of workplace safety and curing quality. They can be equipped with electric drive or pneumatic automatic doors. Suitable for step-by-step systems.

... Especially suitable for separating drinking water heating from heating in gas and heat pump systems. Positive side effect: Utilization of waste heat from heating, utility, and basement rooms with additional dehumidification/drying.

...Single or multi-zone mesh belt continuous dryer for TO caps or closures, condensate-free. Our standard ovens achieve a throughput of up to 1,500 caps/min. Continuous belt ovens for drying PVC/PE compound in closures, heating zones electrically or gas-heated, cooling zone, mesh belt conveyor system, and control cabinet with all necessary components.

... surfaces, such as plaster, plasterboard and concrete. Surface flammability/IMO FTPC part 5:low flammability w/o flue gas forming Thermal stability:+ 6°C up to + 80° C pH level:7.4 Density:1,17 g/cm3 Solids content:29,68 %...